Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact CC2530F256 Zigbee core board with a UART serial port, 21 GPIO lines and an external antenna for 2.4 GHz IEEE 802.15.4 projects. It is a practical starting point for building low-power wireless sensor and automation nodes.

Key Highlights

  • CC2530F256 core board with 8051 CPU for Zigbee development
  • 2.4 GHz IEEE 802.15.4 compliant RF transceiver with external antenna
  • UART serial port plus 21 GPIO for flexible integration
  • Programmable output power up to 4.5 dBm with strong receiver sensitivity
  • Wide -40 to +125 °C operating temperature range
  • Compact 50 × 30 mm board weighing about 50 g

Ideal For

  • Firmware developers prototyping Zigbee sensor nodes
  • Makers building home and building automation controllers
  • Engineers designing low-power wireless sensor networks
  • Students learning 8051 and IEEE 802.15.4 development
  • Hardware teams adding 2.4 GHz links to industrial monitoring gear

Buying Tip

Confirm you have a 3.3 V supply and a compatible debug programmer before ordering, since neither is included with the board.

Elecvora expert review

Our verdict

A tidy, low-cost Zigbee core board that gives you the CC2530F256, a serial port and plenty of GPIO in a small footprint. It is a sensible starting point for IEEE 802.15.4 development as long as you already own the programming and antenna hardware.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact 50 × 30 mm board with 21 GPIO
  • UART serial port simplifies host connection
  • External antenna allows flexible placement
  • Wide -40 to +125 °C operating range

Cons

  • Antenna, programmer and power supply are not included
  • Requires a regulated 3.3 V supply
  • Firmware tooling and Zigbee stack setup are not covered

Best for

Developers building custom Zigbee and IEEE 802.15.4 nodes

Not ideal for

Plug-and-play users who want a finished, pre-flashed product

Specifications

Model No. / NameZigbee Board/Module
CPU8051
Frequency (GHz)2.3 to 2.5
Antenna TypeExternal
GPIO21
Operating Temperature (°C)-40 ~ +125
Length (mm)50
Width (mm)30
Weight (g)50
Shipping Weight0.055 kg
Shipping Dimensions5 × 3 × 1 cm

What's in the box

  • 1 x CC2530 Zigbee UART wireless core development board

Frequently Asked Questions

What voltage does the board need?
The board is designed to run from a 3.3 V supply on the VCC pin. Do not connect it directly to 5 V.
How do I connect it to a microcontroller?
Use the UART TX and RX pins, cross-connecting them to your host's RX and TX, and share a common ground. The board also provides 21 GPIO lines for additional signals.
Is an antenna included?
The board uses an external antenna, so you will need to supply a suitable 2.4 GHz antenna yourself. The package contains the core board only.
How is firmware loaded onto the board?
Programming uses the debug data, debug clock and reset pins with a compatible programmer. A separate flashing tool and the relevant software are required.
What is the operating temperature range?
The board is specified from -40 to +125 °C, making it suitable for a wide range of indoor and industrial environments.
What comes in the package?
The package includes one CC2530 Zigbee UART wireless core development board. No antenna, cable or programmer is included.

Overview

The CC2530F256 Zigbee UART Wireless Core Development Board is a compact 2.4 GHz module built for engineers and makers working with the Zigbee protocol and IEEE 802.15.4 systems. At its centre is an 8051 CPU paired with a compliant RF transceiver, giving you a programmable wireless core that can be dropped into prototype carriers or small enclosures. The board measures 50 mm by 30 mm and weighs roughly 50 g, so it suits space-constrained builds.

A dedicated serial port makes it straightforward to connect the board to a host microcontroller, USB-serial adapter or development setup, while 21 GPIO lines leave room for sensors, switches and control signals. An external antenna connection helps you position the antenna for the best link in your own enclosure.

Key Features

  • CC2530F256 core: 8051 CPU with a 2.4 GHz RF transceiver in one module.
  • IEEE 802.15.4 compliant: designed for standards-based low-power wireless systems.
  • UART serial port: simple wired link to your host board or adapter.
  • 21 GPIO: enough pins for sensors, indicators and control lines.
  • External antenna: route the antenna where reception is best.
  • Programmable output power: up to 4.5 dBm, with receiver sensitivity and interference robustness suited to crowded 2.4 GHz environments.
  • Few external components: keeps your carrier design lean.

Specifications Explained

Frequency range 2.3 to 2.5 GHz covers the standard 2.4 GHz ISM band used by Zigbee and IEEE 802.15.4 devices, so the board works alongside common wireless hardware in that band.

21 GPIO pins give you digital input and output capacity for sensing and control without adding extra expanders. The serial port uses the TX and RX pins, with VCC at 3.3 V, GND, plus debug data and debug clock lines and a reset pin for programming and troubleshooting.

Operating temperature of -40 to +125 °C means the board is specified for use well beyond typical room conditions, which matters for outdoor enclosures, plant rooms and industrial cabinets.

External antenna lets you choose and place an antenna to suit your enclosure rather than being locked to an onboard radiator.

Compatibility and Requirements

The board is intended for 2.4 GHz IEEE 802.15.4 and Zigbee development. It needs a regulated 3.3 V supply on the VCC pin and a common ground. To flash firmware you will need a suitable programmer connected to the debug data, debug clock and reset pins, plus an external antenna for radio operation. Host connection is made through the UART TX and RX pins. No antenna, programmer or power supply is included unless stated in the package contents.

Typical Uses

  • Home and building automation nodes
  • Lighting control systems
  • Industrial control and monitoring
  • Low-power wireless sensor networks
  • Consumer electronics prototypes
  • Health care monitoring devices

What's in the Box

1 x CC2530 Zigbee UART wireless core development board.

Quick specs

Model No. / Name
Zigbee Board/Module
CPU
8051
Frequency (GHz)
2.3 to 2.5
Antenna Type
External
GPIO
21
Operating Temperature (°C)
-40 ~ +125
See all specifications