
1 / 3 · Click to enlarge
AI Summary
A compact I2C gas sensor module that reports TVOC and calculated eCO2 for indoor air quality projects. Its onboard processing engine delivers digital readings directly to your microcontroller with very low power use.
Key Highlights
- Reports TVOC in ppb and calculated eCO2 values
- I2C digital output at default address 0x5A
- Onboard processing engine for signal analysis
- Low power with sleep and measurement modes
- Wide 1.8V to 3.6V DC operating range
- Compact 21 x 15 mm breakout with interrupt pin
Ideal For
- Makers building indoor air quality monitors
- IoT developers adding environmental sensing
- Students learning about gas sensors and I2C
- Smart home hobbyists prototyping ventilation control
- Product developers evaluating compact air quality modules
Buying Tip
Plan for the recommended 24 to 48 hour burn-in and about 20 minutes of warm-up before judging readings, and confirm your host logic level matches the 1.8V to 3.6V supply.
Elecvora expert review
Our verdict
A tidy, well-integrated air quality sensor for I2C projects, with onboard processing that keeps your microcontroller code simple. Remember that eCO2 is calculated from VOC levels, so it is best used for trends rather than precise CO2 measurement.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Onboard processing reduces host workload
- Low power with sleep and measurement modes
- Simple I2C interface at 0x5A
- Compact and lightweight board
Cons
- eCO2 is estimated, not directly measured
- Requires 24 to 48 hour burn-in for stable readings
- Header pins must be soldered by the user
Best for
Makers and developers building indoor air quality trend monitors over I2C
Not ideal for
Applications needing calibrated, direct CO2 measurement
Specifications
| Shipping Weight | 0.005 kg |
|---|---|
| Shipping Dimensions | 5 × 5 × 2 cm |
What's in the box
- 1 x CCS811 CO2 eCO2 TVOC Air Quality Detection Sensor Module
- 1 x Header Pin
Frequently Asked Questions
Does this module measure CO2 directly?
What voltage does the module need?
How do I connect it to a microcontroller?
How long before readings are stable?
What is included in the package?
How should I store and handle the sensor?
Overview
The CCS811 is a digital gas sensor module built for indoor air quality monitoring. It combines a MOX (metal oxide) sensing element with an integrated processing engine and ADC, so gas trend analysis happens on the module instead of in your code. Readings are delivered over I2C as TVOC in ppb and an equivalent CO2 (eCO2) value derived from VOC levels by an onboard algorithm. Note that eCO2 is a calculated estimate, not a direct CO2 measurement.
Key Features
- Measures Total Volatile Organic Compounds and provides calculated eCO2
- I2C slave interface at default address 0x5A for simple microcontroller integration
- Integrated processing engine with fast response and stable digital output
- Low power operation with sleep and measurement modes
- Interrupt and reset functionality on the breakout header
- Compact 21 x 15 mm board weighing around 2 g
Specifications Explained
Sensing and Output
The MOX sensor responds to a broad range of volatile organic compounds, and the module converts that response into TVOC (ppb) and eCO2 figures. Because eCO2 is algorithm-based, treat it as an air quality trend indicator rather than a calibrated CO2 reading.
Power and Interface
Operating voltage is 1.8V to 3.6V DC, so check your board's logic level before connecting. Communication uses I2C in slave mode at address 0x5A, with pins for VCC, GND, SDA, SCL and INT.
Warm-Up and Environment
Allow roughly 20 minutes of warm-up, and a burn-in period of about 24 to 48 hours is recommended for stable readings. The rated operating temperature range is -40°C to +85°C.
Compatibility and Requirements
The module works with any host that supports I2C at a compatible logic level and can supply 1.8V to 3.6V DC. You will need to solder or socket the supplied header pins and provide your own microcontroller, wiring and power source. No library or firmware is included.
Typical Uses
- Smart home air quality displays and indicators
- IoT environmental monitoring nodes
- HVAC and ventilation control experiments
- Battery-powered portable sensing devices
- Educational and prototyping projects on air quality
What's in the Box
- 1 x CCS811 CO2 eCO2 TVOC Air Quality Detection Sensor Module
- 1 x Header Pin













