Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact STM8S103F3P6 minimum system board powered over Micro USB or 4.5V-15V pins, with reset button and SWIM debug support. All pins are labelled and broken out, making it a convenient base for small STM8 projects.

Key Highlights

  • STM8S103F3P6-based minimum system development board
  • Micro USB power input compatible with common smartphone cables
  • Wide 4.5V-15V input via 2.54 mm pins and power pads
  • On-board reset button plus power and demo indicator lights
  • SWIM interface for debug mode support
  • All pins broken out with detailed labels

Ideal For

  • Makers learning STM8 microcontroller programming
  • Engineers prototyping compact embedded control boards
  • Students building low-cost electronics lab projects
  • Hobbyists adding small sensor or display controllers
  • Developers testing STM8 firmware before custom PCB design

Buying Tip

Confirm you have a Micro USB cable and a SWIM-capable programmer on hand before ordering, since neither is included with the board.

Elecvora expert review

Our verdict

A tiny, affordable STM8 development board that covers the basics well: easy Micro USB power, labelled pins and SWIM debug support. It is a sensible starting point for small STM8 projects as long as you already own the programming tool and cable.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Very small 30 x 20 mm footprint and 4 g weight
  • Micro USB power uses widely available cables
  • Wide 4.5V-15V input via pins and pads
  • All pins broken out with clear labels
  • Reset button and SWIM debug support

Cons

  • No Micro USB cable included
  • Requires a separate SWIM programmer for debug work
  • Bare board only, no accessories or enclosure

Best for

Compact STM8 learning and prototyping projects

Not ideal for

Users wanting a complete kit with cable and programmer included

Specifications

Item TypeDevelopment Board
Based OnSTM8 Based
IC ChipSTM32F103C8T6
Reset Button (Y/N)YES
USBMicro USB
Length (mm)30
Width (mm)20
Weight (g)4
Shipping Weight0.005 kg
Shipping Dimensions4 × 3 × 1.5 cm

What's in the box

  • 1 x Core Board STM8S103F3P6 STM8 Development Board

Frequently Asked Questions

What microcontroller does this board use?
The board is built around the STM8S103F3P6, an STM8-series microcontroller, and is described as an STM8-based development board.
How do I power the board?
You can power it through the Micro USB connector or through the 2.54 mm pins and power supply pads with an input voltage of 4.5V to 15V.
Is a USB cable included?
No. The package contains only the development board, so you will need to supply your own Micro USB cable if you choose USB power.
What does the 5V pin output?
The 5V pin carries the module input voltage rather than a regulated 5V rail, so verify your supply before connecting anything to it.
Does it support debugging?
Yes, the board provides a SWIM interface and supports SWIM debug mode when connected to a compatible debug tool.
Can it output 3.3V to other devices?
Yes, the board can output 3.3V externally through a pin when powered from the pin or pad input.

Overview

The STM8S103F3P6 STM8 Development Board is a minimum system board designed to get an STM8 microcontroller running with minimal setup. At only 30 mm by 20 mm and 4 g, it is small enough to drop into compact enclosures, breadboards and prototype rigs. The board brings out all pins with clear labels, so you can wire sensors, displays and other peripherals without hunting for pinouts.

Key Features

  • STM8S103F3P6 microcontroller at the centre of the board
  • Micro USB connector for power, using cables that are easy to find
  • Alternative power through 2.54 mm pins and power supply pads
  • Reset button for quick restarts during development
  • Power light and demo indicator light for visual status
  • SWIM interface supporting debug mode

Specifications Explained

Power input

The board accepts 4.5V to 15V through its 2.54 mm pins and power pads, and can output 3.3V externally through a pin. Note that the 5V pin carries the module input voltage, so check your wiring before connecting peripherals. The Micro USB port offers a convenient alternative, and because it uses the same cable style as many smartphones, you are unlikely to be caught without a lead.

Size and layout

With a 30 x 20 mm footprint and 4 g weight, the board suits space-constrained builds. Labelled pins simplify jumper wiring and reduce mistakes when moving between breadboard and soldered prototypes.

Debug support

The SWIM interface allows debug mode, which is useful when you need to step through code rather than rely on guesswork. A reset button rounds out the basic development workflow.

Compatibility and Requirements

You will need a Micro USB cable or a suitable 4.5V-15V supply for the pins and pads. Firmware development requires an STM8-compatible toolchain and a SWIM debug connection if you want to use debug mode. The board is supplied as a bare development board, so plan for your own programming hardware and wiring.

Typical Uses

This board fits learning exercises, small control tasks, sensor reading, LED and display experiments, and compact embedded prototypes. It is also handy as a spare development target for testing STM8 code before committing to a custom PCB.

What's in the Box

Package includes one Core Board STM8S103F3P6 STM8 Development Board. Cables and programming tools are not included.

Quick specs

Item Type
Development Board
Based On
STM8 Based
IC Chip
STM32F103C8T6
Reset Button (Y/N)
YES
USB
Micro USB
Length (mm)
30
See all specifications