Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 40 x 40 mm 24V axial replacement fan for Creality Ender and CR-series 3D printers. It keeps the hotend and mainboard cooled with a light 18 g design and a long connecting wire for easy routing.

Key Highlights

  • 40 x 40 mm axial fan running on 24 VDC input
  • Fits hotend and motherboard positions on many Ender and CR models
  • Lightweight plastic body at roughly 18 g
  • Long connecting wire simplifies cable routing
  • Direct replacement for a worn or failed cooling fan
  • Black housing blends with standard Creality printer frames

Ideal For

  • Creality Ender-3 and Ender-5 owners replacing a failed hotend fan
  • CR-10 and CR-X series users servicing mainboard cooling
  • Print farm operators keeping common spares on hand
  • Makers restoring a used Creality printer
  • Anyone doing routine maintenance on a 24V Creality machine

Buying Tip

Check your printer's fan output voltage and measure the old fan's mounting holes before ordering, since this unit is 24 VDC and 40 x 40 mm.

Elecvora expert review

Our verdict

A straightforward service part that does exactly what it should: it replaces a tired 24V cooling fan on a long list of Creality printers. The light build and long wire make installation simple, provided you check voltage and size first.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Wide listed compatibility across Ender and CR-series models
  • Correct 24 VDC rating for the listed printers
  • Light 18 g plastic body suits moving print heads
  • Long connecting wire eases routing
  • Low-cost spare to keep on hand

Cons

  • Only suits 24 VDC fan outputs, not 12 V systems
  • Mounting screws are not listed as included
  • No airflow or noise figures are published for comparison

Best for

Creality Ender and CR-series owners replacing a hotend or mainboard cooling fan

Not ideal for

Printers with 12 V fan outputs or non-40 mm fan mounts

Specifications

Item TypeAxial fan
CompatibilityCR-10S Pro_SV02_Ender-7., Ender-6_CR-10 V2_CR-10 V3_CR-X_CR-X Pro_CR-10 Max_CR-10S Pro V2_CR-2020_CR-3040Pro_CR-200B_CR-XB, Hotend: Ender-3_Ender-3 Pro_Ender-3S_Ender-3 V2_Ender-3 Max_Ender-5_Ender-5s_Ender-5 Pro_Ender-5 Plus, Motherboard:  Ender-3_Ender-3 Pro_Ender-3S_Ender-3 V2_Ender-3 Max_Ender-5_Ender-5s_Ender-5 Pro_Ender-5 Plus
MaterialPlastic
ColorBlack
Input Voltage (VDC)24
Length (mm)40
Width (mm)40
Weight (g)18
Shipping Weight0.034 kg
Shipping Dimensions12 × 7 × 1 cm

What's in the box

  • 1 x Creality 4010 Axial Cooling Fan

Frequently Asked Questions

What voltage does this fan need?
It is rated for 24 VDC input. Check that your printer's fan connector supplies 24 V before fitting it.
Which printers is it compatible with?
It is listed for mainboard use on the Ender-3 family and Ender-5 family, and for hotend use on those models plus the Ender-6, Ender-7, CR-10 V2, CR-10 V3, CR-X, CR-X Pro, CR-10 Max, CR-10S Pro, CR-10S Pro V2, CR-2020, CR-3040 Pro, CR-200B, CR-XB and SV02.
What size is the fan?
It measures 40 mm by 40 mm and weighs about 18 g, with a plastic housing in black.
What is included in the package?
The package contains one Creality 4010 axial cooling fan. Mounting screws are not listed as included.
Can I use it as a hotend fan and a mainboard fan?
Yes, where your model is listed for both positions. Confirm the fan mount and voltage for each position on your printer.
How should I look after the fan?
Keep the blades and surrounding area free of dust and filament debris, and check that the cable is not rubbing against moving parts.

Overview

The Creality 4010 Axial Fan 24V is a small but important service part for Creality 3D printers. It measures 40 mm by 40 mm and runs on a 24 VDC supply, moving air across the hotend and the mainboard so those areas stay within their normal operating range. When a fan weakens or stops, prints can suffer from heat creep, uneven extrusion or board overheating, so keeping a spare on hand is sensible.

The fan uses a plastic housing in black and weighs around 18 g, so it adds almost nothing to the moving mass of the print head when used as a hotend fan. A long connecting wire gives you enough length to route the cable neatly along the frame or through the cable chain.

Key Features

  • 24 VDC input: matches the supply used by the listed Creality printers.
  • 40 x 40 mm axial design: a standard compact size for hotend and mainboard cooling.
  • Lightweight build: about 18 g, so it suits moving print head assemblies.
  • Long connecting wire: makes installation and cable management easier.
  • Broad model coverage: listed for many Ender and CR-series machines.

Specifications Explained

Voltage: the 24 VDC rating is the key figure to check before buying. It must match the fan output on your printer, because a 12 V fan on a 24 V line will not run correctly.

Size: at 40 mm long and 40 mm wide, this is the familiar 4010 format used in many Creality hotend and mainboard mounts. Measure your existing fan and mounting holes before ordering.

Weight: around 18 g keeps the print head light, which matters on machines where the hotend fan travels with the carriage.

Compatibility and Requirements

The fan is listed for motherboard use on the Ender-3, Ender-3 Pro, Ender-3S, Ender-3 V2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro and Ender-5 Plus. For hotend use it is listed for those same models plus the Ender-6, Ender-7, CR-10 V2, CR-10 V3, CR-X, CR-X Pro, CR-10 Max, CR-10S Pro, CR-10S Pro V2, CR-2020, CR-3040 Pro, CR-200B, CR-XB and SV02.

You will need a 24 VDC fan connection on your printer and the correct mounting screws for your bracket. Confirm the fan position and voltage on your specific machine before fitting.

Typical Uses

Use this fan as a direct replacement when an original hotend or mainboard fan becomes noisy, slows down or stops. It is also useful for planned maintenance, for keeping a spare in your parts drawer, and for anyone servicing several Creality printers who wants a common fan on the shelf.

What's in the Box

  • 1 x Creality 4010 Axial Cooling Fan

Quick specs

Item Type
Axial fan
Compatibility
CR-10S Pro_SV02_Ender-7., Ender-6_CR-10 V2_CR-10 V3_CR-X_CR-X Pro_CR-10 Max_CR-10S Pro V2_CR-2020_CR-3040Pro_CR-200B_CR-XB, Hotend: Ender-3_Ender-3 Pro_Ender-3S_Ender-3 V2_Ender-3 Max_Ender-5_Ender-5s_Ender-5 Pro_Ender-5 Plus, Motherboard:  Ender-3_Ender-3 Pro_Ender-3S_Ender-3 V2_Ender-3 Max_Ender-5_Ender-5s_Ender-5 Pro_Ender-5 Plus
Material
Plastic
Color
Black
Input Voltage (VDC)
24
Length (mm)
40
See all specifications