Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A complete metal hotend kit for the Creality Ender-3 V2, featuring an ABS+PC casing and efficient heating and cooling. It restores stable extrusion with a smooth nozzle and upgraded throat tube.

Key Highlights

  • Complete hotend kit for Creality Ender-3 V2
  • Metal construction with lightweight ABS+PC casing
  • Efficient heating and cooling for stable printing
  • Smooth inner-wall nozzle for consistent filament flow
  • Upgraded throat tube for better thermal conductivity
  • Flame-retardant silicone sleeve included

Ideal For

  • Ender-3 V2 owners needing a replacement hotend
  • 3D printing hobbyists performing routine maintenance
  • Users restoring a clogged or worn hotend
  • Makers keeping a spare assembly on hand

Buying Tip

Check that your printer is the Ender-3 V2 model, as this kit is not listed for other Ender-3 variants.

Elecvora expert review

Our verdict

This is a sensible OEM replacement for Ender-3 V2 owners who want to restore original performance without guesswork. The metal core and ABS+PC casing strike a good balance between durability and weight.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Direct fit for Ender-3 V2
  • Lightweight 85 g assembly
  • Smooth nozzle and upgraded throat tube
  • Flame-retardant silicone sleeve included

Cons

  • Only compatible with Ender-3 V2
  • Installation requires basic tools and wiring care

Best for

Ender-3 V2 owners doing maintenance or repairs

Not ideal for

Printers other than the Ender-3 V2

Specifications

Item TypeKit
CompatibilityEnder-3 V2
MaterialMetal
ColorRed, Black
Weight (g)85
Shipping Weight0.163 kg
Shipping Dimensions16.5 × 15.5 × 5 cm

What's in the box

  • 1 x Creality Hotend Kit for Ender-3 V2

Frequently Asked Questions

Is this hotend kit compatible with my Ender-3 V2?
Yes, it is designed specifically for the Creality Ender-3 V2. It is not listed for other Ender-3 models.
What is included in the package?
The package contains one Creality hotend kit for the Ender-3 V2. No other components are included.
Do I need to solder anything to install it?
No soldering is required, but you will need to disconnect and reconnect the heater, thermistor, and fan wires. Basic tools are sufficient.
What voltage does the hotend use?
The product data does not specify voltage. It is intended to work with the Ender-3 V2's standard electronics.
How should I care for the hotend?
Keep the nozzle clean and avoid over-tightening fittings. Replace the silicone sleeve if it becomes damaged.
Who can I contact for technical support?
For technical assistance, contact Creality after-sales at +86 755 3396 5666 or [email protected]. For returns or other queries, contact [email protected].

Overview

The Creality Ender-3 V2 Hotend Kit is a direct replacement assembly for the Ender-3 V2 3D printer. It combines a metal hotend core with a lightweight ABS+PC casing that has a cool frosted texture and is wear-resistant. At only 85 g, it keeps the moving mass low while providing stable printing performance. Whether your current hotend is clogged, worn, or damaged, this kit is a practical way to restore reliable extrusion without replacing the entire printer.

Key Features

  • Stable operation: The assembly is designed for consistent, repeatable printing results.
  • Efficient heating and cooling: Rapid heating and optimized fan airflow help maintain accurate temperature control.
  • Smooth filament feeding: The nozzle inner wall is smooth to reduce friction and support steady flow.
  • Upgraded throat tube: Improved thermal conductivity helps manage heat creep and keeps the melt zone stable.
  • Flame-retardant silicone sleeve: Adds a layer of heat protection and safety around the heater block.
  • Compact and easy to install: The kit is designed for straightforward replacement on the Ender-3 V2.

Specifications Explained

Item type: This is a kit, meaning it contains the hotend assembly needed for replacement. Compatibility: It is made specifically for the Creality Ender-3 V2, so no modification is required. Material: The metal core provides durability, while the ABS+PC casing keeps weight down and resists wear. Color: Available in red and black. Weight: At 85 g, the hotend is light enough to avoid adding unnecessary inertia to the print head. Shipping dimensions: The package measures 16.5 × 15.5 × 5 cm and weighs 0.163 kg, making it easy to store or ship.

Compatibility and Requirements

This hotend kit is compatible with the Creality Ender-3 V2 only. It is a replacement part and requires basic tools for installation. No additional components are included beyond the hotend kit itself.

Typical Uses

Use this kit to replace a worn or clogged hotend on your Ender-3 V2, to restore consistent extrusion for everyday printing, or as a spare part for maintenance. It suits PLA, ABS, and other common filaments, though specific material compatibility depends on your printer settings and nozzle size.

What's in the Box

The package includes one Creality hotend kit for the Ender-3 V2. Note: package contents are based on the manufacturer's listing; please verify upon receipt.

Quick specs

Item Type
Kit
Compatibility
Ender-3 V2
Material
Metal
Color
Red, Black
Weight (g)
85
Shipping Weight
0.163 kg
See all specifications