Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A genuine Creality replacement extruder motor for the Ender-5 Max, with a 1.8° step angle and 12-tooth gear for steady filament feeding. Its JST-PH 4-pin connector plugs directly into the printer board for a straightforward swap.

Key Highlights

  • 1.8° step angle supports accurate, repeatable motor positioning
  • 12-tooth gear grips filament for consistent extrusion
  • JST-PH 4-pin connector for direct board connection
  • Aluminium alloy and metal body for durable service
  • Compact 55 x 35 mm body weighing 98 g
  • Rated around 0.8 A with roughly 0.4 N.m holding torque

Ideal For

  • Ender-5 Max owners replacing a worn extruder motor
  • Makers who service and maintain their own 3D printers
  • Users restoring consistent filament feeding after extrusion faults
  • Anyone keeping spare parts for a Creality printer

Buying Tip

Check that your printer's extruder cable ends in a JST-PH 4-pin plug and that you are fitting the Ender-5 Max extruder position before ordering.

Elecvora expert review

Our verdict

A sensible genuine replacement part for the Ender-5 Max extruder, with the right step angle, gear and connector for a direct swap. It is a maintenance component rather than an upgrade, and that is exactly what most owners need.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Genuine Creality part with matching connector
  • 1.8° step angle and 12-tooth gear for steady feed
  • Compact, lightweight body at 98 g
  • Aluminium alloy and metal construction

Cons

  • Fits the Ender-5 Max extruder application only
  • No cable or mounting hardware listed beyond the motor

Best for

Ender-5 Max owners replacing a failing extruder motor

Not ideal for

Printers that use a different motor connector or frame size

Specifications

Item TypeStepper Motor
CompatibilityCreality 3D Printers
MaterialAluminum Alloy, Metal
Step Angle1.8°
Gear Tooth12
Connector TypeJST‑PH 4‑pin
Rated Current (A)~0.8
Holding Torque (N.m)~0.4
Length (mm)55
Width (mm)35
ColorBlack and silver
Weight (g)98
Shipping Weight0.1 kg
Shipping Dimensions10 × 8 × 4 cm

What's in the box

  • 1 x Creality Ender-5 Max (E) Stepper Motor

Frequently Asked Questions

What printer is this motor for?
It is intended for the extruder of the Creality Ender-5 Max and is listed for Creality 3D printers. Check your model and connector before ordering.
What is the step angle and why does it matter?
The step angle is 1.8°, which gives fine, repeatable movement. In an extruder this supports controlled, consistent filament feeding.
What connector does it use?
It uses a JST-PH 4-pin connector that plugs into the printer's main board. Confirm your cable matches this plug type.
What are the electrical ratings?
The rated current is around 0.8 A and the holding torque is around 0.4 N.m. These suit the light, steady load of an extruder drive.
What is included with the motor?
The package contains one Creality Ender-5 Max (E) Stepper Motor. No other parts are listed.
How should I look after it?
Keep the motor and its connector clean and dry, check the cable for wear, and make sure the mounting screws stay tight during use.

Overview

The Creality Ender-5 Max (E) Stepper Motor is a genuine Creality component intended for the extruder of the Ender-5 Max 3D printer. When an extruder motor starts skipping, running hot or losing torque, replacing it with the correct part is the simplest way to get reliable filament feeding back. This motor is built around a 1.8° step angle, so each step moves the shaft by a small, predictable amount, which helps the extruder deliver filament at a steady rate.

Key Features

  • 1.8° step angle: fine, repeatable steps for controlled extrusion.
  • 12-tooth gear: a metal drive gear that engages the filament for positive grip.
  • JST-PH 4-pin connector: matches the printer's wiring for a direct connection.
  • Aluminium alloy and metal construction: a sturdy body suited to long print sessions.
  • Compact footprint: 55 mm long and 35 mm wide, weighing 98 g.

Specifications Explained

The 1.8° step angle is the standard full-step figure for this class of motor, meaning 200 full steps per revolution. In an extruder, that translates into fine control over how much filament is pushed through the hotend, which matters for clean layer lines and predictable flow.

The 12-tooth gear is the part that actually contacts the filament. A metal gear with a defined tooth count gives the motor something to push against, so the filament advances without slipping under normal conditions. The rated current of around 0.8 A and holding torque of around 0.4 N.m describe how much force the motor can hold when energised; together they suit the light, steady load of an extruder drive.

The JST-PH 4-pin connector is the plug that links the motor to the printer's main board. Because it matches the Ender-5 Max wiring, there is no need to splice cables. The aluminium alloy and metal housing keeps the motor rigid, and at 98 g it adds little weight to the extruder assembly.

Compatibility and Requirements

This motor is listed for Creality 3D printers and is intended as the extruder stepper for the Ender-5 Max. Fitting it requires access to the extruder assembly and the main board connector. Confirm that your printer's motor cable uses the same JST-PH 4-pin plug before ordering.

Typical Uses

  • Replacing a worn or faulty extruder motor on an Ender-5 Max.
  • Keeping a spare motor on hand for maintenance.
  • Restoring consistent filament feed after extrusion problems.

What's in the Box

1 x Creality Ender-5 Max (E) Stepper Motor.

Quick specs

Item Type
Stepper Motor
Compatibility
Creality 3D Printers
Material
Aluminum Alloy, Metal
Step Angle
1.8°
Gear Tooth
12
Connector Type
JST‑PH 4‑pin
See all specifications