Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A replacement extrusion kit built for Creality K1, K1 Max, K1C, K1 SE and Ender-3 V3 series printers. It restores reliable filament feeding with quiet 5-8 CFM airflow in a compact 12 g assembly.

Key Highlights

  • Fits K1, K1 Max, K1C, K1 SE and Ender-3 V3 series
  • Stainless steel and high-strength plastic construction
  • Quiet operation rated around 20-25 dB(A)
  • Airflow of approximately 5-8 CFM for cooling
  • Lightweight 12 g assembly with compact footprint
  • Straightforward replacement for worn extrusion parts

Ideal For

  • Creality K1 and K1 Max owners doing extruder maintenance
  • Ender-3 V3 and V3 Plus users replacing worn extrusion parts
  • K1C and K1 SE owners keeping a spare on the shelf
  • Print farms reducing downtime from clogs and jams
  • Hobbyists refurbishing a used Creality printer

Buying Tip

Confirm your exact printer model against the compatibility list before ordering, because extrusion assemblies are not interchangeable across every Creality generation.

Elecvora expert review

Our verdict

A sensible, model-specific service part that gets a K1 or Ender-3 V3 series printer feeding filament properly again without guesswork. The quiet fan and light 12 g build are welcome details for anyone printing for long stretches.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Direct fit for six Creality model lines
  • Quiet 20-25 dB(A) operation
  • Lightweight 12 g assembly
  • Stainless steel and high-strength plastic construction

Cons

  • Package contents are not specified, so verify included parts
  • No installation hardware details are provided
  • Only suits the listed Creality models

Best for

Creality K1 and Ender-3 V3 series owners restoring or maintaining extrusion

Not ideal for

Printers outside the listed Creality compatibility range

Specifications

Item TypeKit
CompatibilityK1_K1 Max_K1C_Ender-3 V3_Ender-3 V3 Plus_K1 SE
MaterialStainless steel or high-strength plastic
ColorBlack
Air FlowApproximately 5-8 CFM
Noise (dB)Around 20-25 dB(A)
Weight (g)12
Shipping Weight0.02 kg
Shipping Dimensions15 × 8 × 4 cm

Frequently Asked Questions

Which printers does this extrusion kit fit?
It is listed for the Creality K1, K1 Max, K1C, K1 SE, Ender-3 V3 and Ender-3 V3 Plus. Check your model before ordering, as assemblies differ between generations.
How noisy is the cooling fan?
The kit is rated around 20-25 dB(A), which is quiet enough for a home or office workspace during long prints.
What airflow does it provide?
Airflow is approximately 5-8 CFM, aimed at keeping the hotend zone and printed layers cooled consistently.
What is included in the box?
Package contents are not specified for this listing. Confirm the included parts with the seller if you need a particular component.
How much does the kit weigh?
The assembly weighs about 12 g, with a shipping weight of roughly 0.02 kg in a 15 x 8 x 4 cm box.
How should I care for it?
Keep the fan and housing free of filament dust and debris, and check fasteners periodically so the assembly stays seated and square.

Overview

The Creality Extrusion Kit is a service part for the filament extrusion system on several current Creality machines. If your printer is under-extruding, skipping, or jamming repeatedly, replacing the worn extrusion components is often the quickest route back to clean, consistent prints. This kit is built for the K1, K1 Max, K1C, K1 SE and the Ender-3 V3 series, so it matches the mounting and airflow layout those printers already use.

At only 12 g, the assembly adds almost nothing to the moving mass of the toolhead. The fan side runs at roughly 5-8 CFM with noise around 20-25 dB(A), which keeps cooling effective without turning your workspace into a wind tunnel.

Key Features

  • Model-specific fit: designed around the K1 and Ender-3 V3 families rather than a universal bracket.
  • Mixed materials: stainless steel and high-strength plastic where each is needed.
  • Quiet cooling: approximately 20-25 dB(A) at 5-8 CFM airflow.
  • Light build: 12 g total weight keeps toolhead inertia low.
  • Black finish: matches the stock look of the listed printers.

Specifications Explained

Airflow and noise

The 5-8 CFM figure describes how much air the cooling side moves, which matters for keeping the hotend zone and freshly deposited plastic under control. The 20-25 dB(A) rating is the practical number for a home or office setup: audible if you listen for it, but easy to live with during long prints.

Materials and weight

Stainless steel handles the load-bearing and heat-exposed points, while high-strength plastic keeps the housing light. At 12 g, the kit will not noticeably change how the toolhead moves, which helps preserve print quality at speed.

Form factor

The kit ships in a compact 15 x 8 x 4 cm box weighing about 0.02 kg, so it is easy to store as a spare part.

Compatibility and Requirements

Confirmed compatibility covers the Creality K1, K1 Max, K1C, K1 SE, Ender-3 V3 and Ender-3 V3 Plus. Check your printer model before ordering, since extrusion assemblies differ between generations. Installation reuses your printer's existing mounting points; no additional hardware specifications are stated for this kit.

Typical Uses

  • Replacing a worn or clogged extrusion assembly after a failed print.
  • Keeping a spare on hand to reduce downtime between jobs.
  • Refreshing a second-hand K1 or Ender-3 V3 series printer.
  • Routine maintenance on printers running high print hours.

What's in the Box

Package contents are not specified for this listing. Confirm the included parts with the seller before purchase if you need a specific component.

Quick specs

Item Type
Kit
Compatibility
K1_K1 Max_K1C_Ender-3 V3_Ender-3 V3 Plus_K1 SE
Material
Stainless steel or high-strength plastic
Color
Black
Air Flow
Approximately 5-8 CFM
Noise (dB)
Around 20-25 dB(A)
See all specifications