Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 12V Creality stepper motor for the extruder assembly of compatible Creality 3D printers. It is a practical drop-in replacement for a worn or failed extruder motor, with metal construction and a 153 g weight.

Key Highlights

  • 12V extruder stepper motor for Creality 3D printers
  • Compact metal body measuring 35 mm by 41 mm
  • Weighs 153 g, close to the original motor weight
  • Black housing with silver shaft
  • Straightforward replacement for a worn extruder motor
  • Useful spare part for printer maintenance

Ideal For

  • Creality 3D printer owners replacing a failed extruder motor
  • Makers keeping spare parts for printer maintenance
  • Small print farms minimizing downtime
  • Repair technicians servicing Creality machines
  • Hobbyists comfortable with printer hardware swaps

Buying Tip

Measure the old motor and confirm your printer runs a 12 V extruder circuit before ordering, since a 24 V machine needs a different part.

Elecvora expert review

Our verdict

A sensible, low-cost replacement part for Creality owners who need to get a printer feeding filament again. It is a straightforward swap rather than an upgrade, so buy it to restore function, not to change performance.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Genuine Creality part for compatible printers
  • Compact 35 by 41 mm metal body
  • 12 V rating matches common Creality electronics
  • Light 153 g weight
  • Simple replacement procedure

Cons

  • Not suitable for 24 V printer setups
  • No mounting hardware or cable listed in the box
  • Requires basic hardware and wiring confidence

Best for

Creality owners replacing a worn or failed extruder motor

Not ideal for

Printers running 24 V extruder electronics or users wanting a performance upgrade

Specifications

Item TypeExtruder Motor
CompatibilityCreality 3D Printers
MaterialMetal
Input Voltage (VDC)12
Length (mm)35
Width (mm)41
ColorBlack with Silver Shaft
Weight (g)153
Shipping Weight0.16 kg
Shipping Dimensions4.5 × 4.1 × 4.1 cm

What's in the box

  • 1 x Creality Hi Extruder Motor

Frequently Asked Questions

Which printers is this motor for?
It is designed for Creality 3D printers. Confirm your model uses a 12 V extruder stepper and that the mounting and shaft match before buying.
What voltage does it need?
The motor is rated at 12 VDC. Do not fit it to a printer that supplies 24 V to the extruder motor.
What are the dimensions and weight?
It measures 35 mm long and 41 mm wide and weighs 153 g, with a black body and silver shaft.
What is included in the package?
The package contains 1 x Creality Hi Extruder Motor. Mounting screws and cables are not listed.
Is it hard to install?
It is a direct replacement for the original motor, but you will need basic tools and should disconnect power and note the wiring before starting.
How should I care for it?
Keep the motor and connector free of filament dust and check the cable is not strained. Replace it if it becomes noisy or loses torque.

Overview

The Creality Hi Extruder Motor is a stepper motor intended for the extruder assembly of Creality 3D printers. When an extruder motor starts to skip, lose torque or fail outright, the printer stops feeding filament reliably, and prints suffer or stop altogether. This part gives you a like-for-like replacement rather than forcing a larger repair or a new machine.

It is a compact unit: 35 mm long, 41 mm wide and 153 g in weight, with a metal body finished in black and a silver shaft. That size and weight make it a practical match for the space inside a typical Creality extruder setup.

Key Features

  • 12 VDC input for Creality printer electronics that supply 12 V to the extruder motor.
  • Metal construction for a rigid motor body that holds up to regular printing use.
  • Compact footprint at 35 mm long and 41 mm wide, so it fits where the original motor sat.
  • 153 g weight, keeping the extruder assembly close to its original balance.
  • Silver shaft and black housing for a clean, standard look inside the printer.

Specifications Explained

Voltage

The motor is rated at 12 VDC. Check that your printer's mainboard and extruder wiring supply 12 V before fitting it; a 24 V machine would need a different motor.

Size and weight

At 35 mm long, 41 mm wide and 153 g, the motor is small enough for tight extruder brackets and light enough not to stress the mounting. Compare these figures with the motor you are removing to confirm the fit.

Build

The metal body resists flex and heat better than plastic-housed alternatives, which matters on a part that runs throughout every print.

Compatibility and Requirements

This motor is made for Creality 3D printers. Before ordering, confirm that your model uses a 12 V extruder stepper motor and that the mounting pattern and shaft match the part you are replacing. Installation requires basic tools and comfort with disconnecting and reconnecting printer wiring.

Typical Uses

  • Replacing a failed or noisy extruder motor on a Creality printer.
  • Keeping a spare motor ready so a breakdown does not stall a print queue.
  • Restoring reliable filament feeding after wear on an older machine.
  • Servicing printers in a small workshop or makerspace.

What's in the Box

1 x Creality Hi Extruder Motor.

Quick specs

Item Type
Extruder Motor
Compatibility
Creality 3D Printers
Material
Metal
Input Voltage (VDC)
12
Length (mm)
35
Width (mm)
41
See all specifications