
1 / 3 · Click to enlarge
AI Summary
A compact right-side Z-axis limit switch for compatible Creality 3D printers, rated at 5V. It restores reliable Z-axis homing so the nozzle stops at the correct reference point.
Key Highlights
- Right-side Z-axis mounting for correct homing position
- 5V operating voltage matches Creality printer electronics
- ABS and metal body for everyday durability
- Compact 26 x 12 mm footprint at just 3 g
- Straightforward replacement for a worn or faulty switch
- Suits routine maintenance and spare-part stocking
Ideal For
- Creality 3D printer owners doing routine maintenance
- Makers troubleshooting Z-axis homing faults
- Users replacing a worn right-side limit switch
- Workshops keeping spare endstop parts on hand
Buying Tip
Check that your Creality printer uses a right-side Z-axis limit switch at 5V and compare the 26 x 12 mm body against the old part before ordering.
Elecvora expert review
Our verdict
A sensible, low-cost replacement part for the right-side Z-axis on compatible Creality printers. It covers the basics well: 5V operation, a compact ABS and metal body and a straightforward fit.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Correct right-side Z-axis mounting type
- 5V rating suits Creality endstop circuits
- Compact 26 x 12 mm body and 3 g weight
- ABS and metal construction
Cons
- Compatibility limited to Creality printers
- Right-side Z-axis use only, not a universal switch
- Wiring and connector type not specified in the listing
Best for
Creality owners replacing a faulty right-side Z-axis limit switch
Not ideal for
Printers that use a different switch position, voltage or mounting layout
Specifications
| Item Type | Switch |
|---|---|
| Compatibility | Creality 3D Printers |
| Material | ABS, Metal |
| Input Voltage (VDC) | 5V |
| Color | Black |
| Mounting Type | Right-side Z-axis |
| Operating Voltage | 5V |
| Length (mm) | 26 |
| Width (mm) | 12 |
| Weight (g) | 03 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 8 × 6 × 2 cm |
What's in the box
- 1 x Creality Hi Z-axis limit switch (right side)
Frequently Asked Questions
What does this Z-axis limit switch do?
Which printers is it compatible with?
What voltage does it use?
Is the switch pre-wired?
What is included in the package?
How should I care for the switch?
Overview
The Creality Hi Z-axis limit switch is a small but important part of the homing system on compatible Creality 3D printers. Mounted on the right side of the Z-axis, it signals the control board when the axis reaches its reference position. When that signal is missing or unreliable, prints can start at the wrong height, first layers can vary, and the nozzle may travel further than it should.
This replacement switch is built around a micro-switch mechanism housed in ABS with metal components. It operates at 5V, measures about 26 mm by 12 mm, and weighs only 3 g, so it fits neatly into the right-side mounting position without adding bulk.
Key Features
- Right-side Z-axis design: shaped and positioned for the right-side limit switch location on compatible Creality printers.
- 5V operation: matches the low-voltage electronics used for endstop and limit switch signals.
- Durable materials: ABS housing with metal internal parts for repeated switching cycles.
- Compact size: 26 mm length and 12 mm width keep the installation tidy.
- Lightweight: at roughly 3 g, it adds no meaningful load to the axis assembly.
- Replacement-ready: a practical spare for maintenance or troubleshooting.
Specifications Explained
Input and operating voltage: both are listed as 5V, which is the signal level the switch is intended to work with. Always confirm your printer's endstop circuit before connecting a replacement part.
Material: the ABS body protects the internal mechanism, while the metal parts provide the switching contact. This combination is common for small limit switches that see frequent actuation.
Dimensions and weight: the 26 mm length, 12 mm width and 3 g weight describe a small component that mounts in a tight space. Check clearance around the right-side Z-axis mount before fitting.
Mounting type: the switch is specified for right-side Z-axis use, so it is not a universal part for every axis or every printer.
Compatibility and Requirements
This switch is listed for Creality 3D printers and is specifically intended for right-side Z-axis mounting. It is not described as compatible with other brands or with left-side positions. Before ordering, confirm that your printer uses a right-side Z-axis limit switch at 5V and that the mounting layout matches the compact 26 x 12 mm body.
Typical Uses
- Replacing a right-side Z-axis limit switch that no longer triggers reliably.
- Restoring consistent Z-axis homing after a homing fault.
- Keeping a spare switch for routine printer maintenance.
- Servicing a printer that has developed uneven first-layer height.
What's in the Box
1 x Creality Hi Z-axis limit switch (right side).
Quick specs
- Item Type
- Switch
- Compatibility
- Creality 3D Printers
- Material
- ABS, Metal
- Input Voltage (VDC)
- 5V
- Color
- Black
- Mounting Type
- Right-side Z-axis














