Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

Replacement interface PCBA for the Creality CFS filament box, handling RS-485 communication between the printer and the multi-filament unit. A direct-fit spare that restores filament sensing and status reporting in K2 Plus Combo and Hi Combo setups.

Key Highlights

  • Replacement interface board for the Creality CFS filament box
  • RS-485 communication link between printer and filament system
  • Supports filament presence and run-out sensor signals
  • Per-channel status LEDs for connection and error checks
  • Compact 55 x 25 mm PCB with standard CFS mounting
  • Fits Creality K2 Plus Combo and Hi Combo

Ideal For

  • K2 Plus Combo owners repairing a CFS box
  • Hi Combo users keeping a spare interface board
  • Makers maintaining multi-filament setups themselves
  • Buyers refreshing a used CFS filament system

Buying Tip

Confirm your CFS box uses the V20 interface module before ordering, since this board is a direct replacement for that specific version.

Elecvora expert review

Our verdict

A sensible, low-cost repair part for CFS owners who would rather fix a faulty interface board than replace the whole filament box. It does one job, fits the listed printers, and keeps a multi-filament setup running.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Direct replacement for the V20 CFS interface module
  • RS-485 link with sensor support for filament channels
  • Per-channel LEDs make fault finding easier
  • Small, light board that fits the CFS enclosure

Cons

  • Only confirmed for K2 Plus Combo, Hi Combo and the CFS Box
  • No cables or mounting hardware listed in the box
  • Requires you to open the CFS box yourself

Best for

Owners of K2 Plus Combo or Hi Combo printers repairing a CFS box

Not ideal for

Printers outside the listed Creality CFS range

Specifications

Item Type3D Printer Part
CompatibilityCreality K2 Plus Combo, Creality Hi Combo, Creality CFS Box
MaterialPCB, Electronic Components
ColorBlack
Length (mm)55
Width (mm)25
Weight (g)9
Shipping Weight0.02 kg
Shipping Dimensions10 × 8 × 2 cm

What's in the box

  • 1 x Creality Module PCBA, MF003 INTERFACE V20

Frequently Asked Questions

What does this module actually do?
It is the interface board inside the Creality CFS box that manages communication with the printer and carries filament sensor signals. Replacing a failed board restores that link.
Which printers is it compatible with?
The supplied data lists the Creality K2 Plus Combo, Creality Hi Combo and the Creality CFS Box. Check your existing module is the V20 version before ordering.
Do I need to solder anything?
No soldering is described for this part. It is a plug-and-play replacement using the standard CFS connectors, though you do need to open the CFS box.
What is included in the package?
One Creality Module PCBA, MF003 INTERFACE V20. Cables and mounting hardware are not listed as included.
How do I know the board is working after fitting?
Power the printer on and check the per-channel status LEDs in the CFS box, then confirm the printer recognises filament presence on each channel.
How should I store a spare board?
Keep it in an anti-static bag away from moisture and static sources until you need it, and handle it by the edges rather than the components.

Overview

The Creality MF003 Interface V20 CFS 485 PCBA Module is a small replacement circuit board built for the Creality Filament System (CFS) box. In a multi-filament setup, the CFS box and the printer need a reliable channel for exchanging data, and this board is the module that manages that link. It carries sensor information from the filament channels back to the printer and relays the control logic the CFS system expects.

At 55 mm long, 25 mm wide and 9 g, the board is sized to drop into the CFS enclosure using the standard mounting points and connectors. It is a practical part for anyone repairing a CFS box that has stopped reporting filament status, or for keeping a spare on the shelf before a failure interrupts a long print job.

Key Features

  • RS-485 interface: a robust serial link between the CFS box and the printer motherboard.
  • Sensor integration: supports run-out and tangle detection signals across the filament channels.
  • Status LEDs: per-channel indicators help you confirm connection, filament presence or an error at a glance.
  • Modular fit: standard CFS mounting and connectors keep the swap straightforward.
  • Signal handling: buffering and isolation designed to improve noise immunity inside the filament box.

Specifications Explained

Compatibility is the first thing to check: this board is listed for the Creality K2 Plus Combo, Creality Hi Combo and the Creality CFS Box. It is not a general-purpose board for other printer models.

Dimensions and weight matter because the board sits inside the CFS enclosure. The 55 x 25 mm footprint and 9 g weight match the space available, so it mounts where the original module was fitted.

Construction uses a PCB with electronic components in a black finish. The V20 interface designation refers to the control logic version the CFS system expects, so match it to your existing module when ordering.

Shipping figures of 0.02 kg and 10 x 8 x 2 cm describe the packed parcel, not the board itself.

Compatibility and Requirements

Use this module with Creality K2 Plus Combo and Creality Hi Combo printers, and with the Creality CFS Box. It is a replacement part, so it assumes you already have a CFS box and the associated cabling in place. No other printers or filament systems are confirmed for this board in the supplied data.

Typical Uses

  • Replacing a CFS interface board that no longer reports filament status.
  • Restoring communication between a printer and a multi-filament box.
  • Keeping a spare module for maintenance downtime.
  • Repairing or refreshing a second-hand CFS setup.

What's in the Box

1 x Creality Module PCBA, MF003 INTERFACE V20.

Quick specs

Item Type
3D Printer Part
Compatibility
Creality K2 Plus Combo, Creality Hi Combo, Creality CFS Box
Material
PCB, Electronic Components
Color
Black
Length (mm)
55
Width (mm)
25
See all specifications