
1 / 3 · Click to enlarge
AI Summary
This is a 24V, 5000 RPM replacement part cooling fan designed specifically for the Creality CR-10 SE 3D printer. It restores targeted airflow to cool printed layers evenly without any modification.
Key Highlights
- Designed specifically for the Creality CR-10 SE
- 24 VDC input matches the printer's stock electrical system
- 5000 RPM fan speed for effective part cooling
- Lightweight at just 15 g on the print head
- Compact dimensions fit without modification
- Straightforward replacement for a worn or failed fan
Ideal For
- Creality CR-10 SE owners replacing a worn or failed part cooling fan
- 3D printing hobbyists performing routine printer maintenance
- Makers who want an original-fit spare fan on hand
- Users restoring part cooling to reduce stringing and improve overhangs
Buying Tip
Before ordering, check the connector and mounting layout of the fan currently installed on your CR-10 SE to confirm this replacement matches.
Elecvora expert review
Our verdict
A sensible replacement part for CR-10 SE owners who want a fan that fits as intended without modification. It is a maintenance component rather than an upgrade, and its value comes from restoring reliable part cooling.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Made specifically for the CR-10 SE
- Correct 24 VDC rating for the printer
- Lightweight 15 g design
- 5000 RPM for effective part cooling
- Straightforward replacement process
Cons
- Only listed as compatible with the CR-10 SE
- Package contents are not specified in the available data
- No warranty information is provided
Best for
CR-10 SE owners replacing a failed or noisy part cooling fan
Not ideal for
Printers other than the CR-10 SE, or users seeking a performance upgrade
Specifications
| Item Type | Cooling Fan |
|---|---|
| Compatibility | CR-10 SE |
| Fan speed | 5000 RPM |
| Input Voltage (VDC) | 24 |
| Weight (g) | 15 |
| Shipping Weight | 0.03 kg |
| Shipping Dimensions | 13 × 9 × 3 cm |
Frequently Asked Questions
Which printer is this fan compatible with?
What voltage does the fan require?
How fast does the fan spin?
What is included in the package?
How do I maintain the fan?
Can I install this fan myself?
Overview
The Creality Part Cooling Fan is a replacement cooling fan made for the CR-10 SE 3D printer. Part cooling is one of the small but critical systems on a 3D printer: without steady airflow across a freshly printed layer, filament can stay soft too long, leading to drooping overhangs, poor bridging, and stringing between travel moves. This fan is designed to slot into the CR-10 SE without modification, so you can restore that airflow quickly when an original fan becomes noisy, intermittent, or stops working.
Key Features
- CR-10 SE fit: Built for the CR-10 SE, so no adapters or bracket changes are needed.
- 24 VDC operation: Matches the printer's stock voltage for straightforward replacement.
- 5000 RPM speed: Provides the airflow needed for part cooling during typical printing.
- Lightweight design: At 15 g, it adds very little mass to the print head assembly.
- Compact footprint: The small form factor suits the CR-10 SE print head layout.
Specifications Explained
Voltage (24 VDC): The fan is rated for 24 VDC input, which is the voltage the CR-10 SE supplies to its cooling fan. Using the correct voltage is important: a 12 V fan on a 24 V supply can fail quickly, so matching the rating avoids that risk.
Fan speed (5000 RPM): Speed is a useful indicator of cooling capacity. At 5000 RPM, this fan is intended to move enough air to cool printed layers without being excessive for the filament types the CR-10 SE typically prints.
Weight (15 g): A light fan reduces the load on the print head. Lower moving mass can help maintain print quality during fast direction changes.
Compatibility and Requirements
This fan is compatible with the Creality CR-10 SE. It is not listed as compatible with other printer models, so check your machine before ordering. Installation requires connecting the fan to the printer's existing fan connection; the product data does not specify a connector type, so confirm the connector on your current fan matches before replacing.
Typical Uses
- Replacing a CR-10 SE part cooling fan that has become noisy or stopped spinning.
- Restoring part cooling after a fan failure to reduce stringing and poor overhangs.
- Keeping a spare fan on hand for maintenance and minimal downtime.
What's in the Box
Package contents are not specified in the available product data. Please check the listing details or contact the seller to confirm what is included before ordering.
Quick specs
- Item Type
- Cooling Fan
- Compatibility
- CR-10 SE
- Fan speed
- 5000 RPM
- Input Voltage (VDC)
- 24
- Weight (g)
- 15
- Shipping Weight
- 0.03 kg














