
1 / 3 · Click to enlarge
AI Summary
A compact filament dryer that uses upgraded PTC heating and a second-generation sensor to hold 45 to 65°C while showing live drying status. It accepts both 1.75mm and 2.85mm filament on spools up to 190mm wide.
Key Highlights
- Upgraded PTC heating system for stable, even drying conditions
- Second-generation temperature and humidity sensor with real-time status display
- Adjustable drying temperature range of 45°C to 65°C
- Works with 1.75mm and 2.85mm filament diameters
- Accepts spools up to 190mm diameter and 68mm width
- Wide-range AC 100-240V 50/60Hz input for international mains
Ideal For
- FDM hobbyists printing PLA, PETG and TPU at home
- Makers in humid climates storing spools in the open
- Users running both 1.75mm and 2.85mm filament setups
- Print farms keeping frequently used reels dry between jobs
- Anyone troubleshooting stringing, bubbling or weak layer adhesion
Buying Tip
Measure your spool diameter and width before ordering, because the chamber accepts reels up to 190mm diameter and 68mm wide.
Elecvora expert review
Our verdict
The SpacePi SE is a practical, compact dryer for FDM users who want a controlled warm chamber without a large footprint. Its dual diameter support and wide mains input make it easy to fit into most home printing setups.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Supports both 1.75mm and 2.85mm filament
- Adjustable 45-65°C drying range
- Live temperature and humidity status display
- Compact 99mm body and 1060g weight
- AC 100-240V input suits many regions
Cons
- Spool size is limited to 190mm diameter and 68mm width
- Only the dryer is included, so no filament or accessories are supplied
Best for
Home FDM printing with PLA, PETG and TPU
Not ideal for
Spools larger than 190mm diameter or 68mm wide
Specifications
| Compatibility | FDM |
|---|---|
| Input Voltage (VDC) | AC 100-240V 50/60Hz |
| Filament Diameter | 1.75, 2.85 |
| Operating Temperature (°C) | 45 to 65 |
| Size (mm) | 99 |
| Weight (g) | 1060 |
| Shipping Weight | 1.345 kg |
| Shipping Dimensions | 23 × 26 × 9 cm |
What's in the box
- 1 x Creality SpacePi SE Filament Dryer
Frequently Asked Questions
What filaments can I dry with the SpacePi SE?
What temperature range does it use?
Will my spool fit inside?
What power supply does it need?
Does it show drying progress?
What is included with the dryer?
Overview
The Creality SpacePi SE Filament Dryer is a dedicated drying unit for FDM 3D printing spools. Moisture absorbed by filament can turn into steam inside the hotend, which often appears as stringing, bubbling, clogging or weak layer adhesion. The SpacePi SE gives you a controlled warm chamber where spools can be dried before a print, so extrusion stays more predictable.
Inside, an upgraded PTC heating system works with a second-generation temperature and humidity sensor. Drying status is shown on the display in real time, so you can see how conditions are changing without guessing.
Key Features
- Upgraded PTC heating: a stable heat source designed for uniform drying conditions.
- Second-generation sensor: tracks temperature and humidity during the drying cycle.
- 45-65°C range: a gentle, adjustable temperature band suitable for common filaments such as PLA, PETG and TPU.
- Two filament diameters: supports both 1.75mm and 2.85mm filament.
- Live status display: shows real-time drying information on the unit.
Specifications Explained
The 45 to 65°C operating range is the working temperature the dryer holds around the spool. Lower settings suit heat-sensitive materials, while the upper end gives a stronger drying push for tougher spools. The dual diameter support means the same unit can serve a standard 1.75mm setup and a 2.85mm machine without extra parts.
Input voltage is AC 100-240V at 50/60Hz, covering common mains supplies in the US, UK, EU, Australia, Brazil, Japan and India. The unit measures 99mm and weighs 1060g, so it sits neatly beside a printer rather than taking over the bench.
Compatibility and Requirements
The dryer is intended for FDM printing. It accepts filament in 1.75mm and 2.85mm diameters and spools with a diameter of 190mm or less and a width of 68mm or less. Check your reel dimensions before loading, since oversized spools will not fit the chamber. A mains outlet matching AC 100-240V 50/60Hz is required.
Typical Uses
Use it before a long print to dry a spool that has been sitting out, or between sessions to keep frequently used reels in better condition. It is handy for PLA, PETG and TPU, and for anyone printing in a humid room or storing filament in an open rack.
What's in the Box
- 1 x Creality SpacePi SE Filament Dryer




Quick specs
- Compatibility
- FDM
- Input Voltage (VDC)
- AC 100-240V 50/60Hz
- Filament Diameter
- 1.75, 2.85
- Operating Temperature (°C)
- 45 to 65
- Size (mm)
- 99
- Weight (g)
- 1060














