Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 100kΩ NTC thermistor built for the Creality CR-M4, used to read hotend and heated bed temperatures. Its accurate, stable readings help the printer hold target temperatures for consistent, reliable prints.

Key Highlights

  • 100kΩ NTC thermistor rated at 25°C
  • Designed specifically for the Creality CR-M4
  • Supports accurate hotend and heated bed temperature readings
  • Lightweight at about 3 g for easy storage and fitting
  • Straightforward replacement for a faulty or drifting sensor
  • Practical spare part for routine printer maintenance

Ideal For

  • Creality CR-M4 owners replacing a faulty temperature sensor
  • Makers keeping spare parts for long print runs
  • Workshops maintaining a CR-M4 printer
  • Hobbyists servicing their own hotend and heated bed

Buying Tip

Confirm your printer is a Creality CR-M4 before ordering, since this thermistor is listed for that model rather than as a universal sensor.

Elecvora expert review

Our verdict

A sensible, low-cost spare for any CR-M4 owner. It does one job, temperature sensing, and having one on hand avoids downtime when the original fails.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Correct 100kΩ NTC value for the CR-M4
  • Small and light, easy to store as a spare
  • Straightforward replacement part
  • Useful during hotend maintenance

Cons

  • Only listed for the CR-M4
  • Package contents not confirmed in the available data
  • Installation requires basic printer disassembly

Best for

CR-M4 owners doing maintenance or keeping spares

Not ideal for

Owners of other printer models or buyers wanting a complete hotend assembly

Specifications

Item TypeThermistor
CompatibilityCR-M4
Resistance100kΩ at 25°C
Weight (g)3
Shipping Weight0.01 kg
Shipping Dimensions9 × 5 × 2 cm

Frequently Asked Questions

What is this thermistor used for?
It measures temperature so the printer can regulate the hotend and heated bed. Accurate readings help the machine hold target temperatures during a print.
Which printer is it compatible with?
It is listed for the Creality CR-M4. Check your model before ordering, as it is not described as a universal sensor.
What is the resistance value?
The thermistor is rated at 100kΩ at 25°C. That is the value the CR-M4 expects at room temperature.
What is included in the package?
Package contents are not specified in the available product data. Confirm the contents with the listing before ordering.
How much does it weigh?
The part weighs approximately 3 g, with a shipping weight of 0.01 kg and shipping dimensions of 9 × 5 × 2 cm.
Do I need to solder it?
That depends on how the sensor connects on your machine. Installation involves routing the lead to its mounting point, so basic maintenance familiarity is helpful.

Overview

The Creality Thermistor is a temperature sensor for the Creality CR-M4 3D printer. It is an NTC type with a resistance of 100kΩ at 25°C, and it feeds temperature data back to the printer so the hotend and heated bed can be regulated. When that feedback is accurate, the printer can hold its target temperatures and keep extrusion consistent from the first layer to the last.

This is a small maintenance part rather than an upgrade. Thermistors sit in a hot, moving assembly and their wiring can be strained during nozzle changes, cleaning or hotend work. Keeping a spare means a temperature error does not turn into a long pause in your print schedule.

Key Features

  • 100kΩ NTC resistance: the standard thermistor value given for this part at 25°C.
  • CR-M4 compatibility: made for the Creality CR-M4 model.
  • Temperature feedback role: supports monitoring and regulation of hotend and heated bed temperatures.
  • Lightweight: approximately 3 g, so it stores easily and adds no meaningful load.
  • Simple replacement: a practical swap when a sensor fails or reads incorrectly.

Specifications Explained

The headline figure is the 100kΩ resistance at 25°C. Thermistors change resistance as they heat up, and the printer's firmware converts that change into a temperature value. The 100kΩ rating tells you this is the value the CR-M4 expects at room temperature, so it is the correct sensor type for that machine rather than a generic substitute.

The 3 g weight and compact shipping size of 9 × 5 × 2 cm reflect what this part is: a small sensor with a lead, not a bulky module. That makes it easy to keep in a parts drawer and inexpensive to hold as a backup.

Compatibility and Requirements

This thermistor is listed for the Creality CR-M4. It is not presented as a universal sensor, so check your printer model before ordering. Installation involves reaching the sensor mounting point on the hotend or heated bed and routing the lead, so basic familiarity with printer maintenance is helpful.

Typical Uses

  • Replacing a CR-M4 thermistor that has failed or gives unstable readings.
  • Keeping a spare before starting long or unattended print jobs.
  • Restoring accurate temperature control after hotend maintenance.
  • Stocking a small consumable for a workshop running a CR-M4.

What's in the Box

Package contents are not specified in the available product data. Check the listing details before ordering if you need to confirm what is included.

Quick specs

Item Type
Thermistor
Compatibility
CR-M4
Resistance
100kΩ at 25°C
Weight (g)
3
Shipping Weight
0.01 kg
Shipping Dimensions
9 × 5 × 2 cm
See all specifications