Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 15-pin male D-sub connector with solder-cup terminals for wiring custom serial and control cables. Its gold-plated pins and 250VAC/5A ratings make it a dependable choice for legacy DB15 equipment and one-off adapters.

Key Highlights

  • 15-pin male D-sub layout in two rows for standard DB15 mating
  • Solder-cup terminals for secure permanent wire connections
  • Gold-plated pins and nickel-plated terminals for stable contact
  • Rated 250VAC at 5A for low-power signal and control circuits
  • Compact 39 x 12 mm body weighing about 4 g each
  • Operates from -55 to 125°C in demanding environments

Ideal For

  • Repair technicians servicing legacy serial equipment
  • Electronics hobbyists building custom DB15 cables
  • Industrial maintenance teams wiring encoders
  • Makers creating test fixtures and breakout adapters
  • Retro computing enthusiasts restoring older peripherals

Buying Tip

Check whether your device needs a male plug or female socket before ordering, and buy a matching hood or backshell if the cable will be handled.

Elecvora expert review

Our verdict

A straightforward, well-plated solder-cup connector that does exactly what a DB15 plug should. It is a solid pick for repairs and custom cables where you want a permanent soldered joint rather than a crimped one.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Gold-plated pins and nickel-plated terminals
  • Wide -55 to 125°C operating range
  • Compact 39 x 12 mm body at about 4 g
  • Clear 250VAC and 5A ratings

Cons

  • Requires soldering skills and tools
  • No hood, screws, or backshell included
  • Pin functions vary by device, so wiring must be checked

Best for

Legacy DB15 repairs and custom soldered cable assemblies

Not ideal for

Tool-free field assembly or high-current power wiring

Specifications

ManufacturerGeneric
Model No. / NameDB 15
GenderMale
Voltage Rating (V)250VAC
Current Rating (A)5
Insulation Resistance (MOhm)1000
Contact Resistance (ohm)20mOhm
Operating Temperature (°C)-55 to 125
MaterialPlastic, Metal
Length (mm)39
Width (mm)12
Weight (g)4 (each)
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x DB15 Male Welded Connector

Frequently Asked Questions

Is this a male or female connector?
It is a male DB15 connector, so it plugs into a female DB15 socket.
How do I attach wires to it?
The contacts are solder cups. Strip and tin each wire, insert it into the cup, and solder it in place.
What voltage and current can it handle?
It is rated for 250VAC and 5A, which suits signal and low-power control circuits.
Does it come with a hood or screws?
No. The package contains one connector only, so order a hood or backshell separately if needed.
What is the operating temperature range?
The connector is rated from -55 to 125°C.
Will it work with any DB15 device?
It mates with standard DB15 sockets, but pin functions differ between devices, so verify your wiring against the equipment documentation.

Overview

The Generic DB15 Male Welded Connector is a 15-pin D-sub plug designed for solder-cup termination. Instead of crimped or insulation-displacement contacts, each pin has a cup that accepts a stripped wire and solder, giving you a permanent, low-resistance joint for custom harnesses and repairs. The connector uses the familiar two-row DB15 arrangement, with an eight-pin row above a seven-pin row, so it mates with standard DB15 sockets.

At roughly 39 mm long and 12 mm wide, with each unit weighing about 4 g, it suits compact panels, adapter shells, and cable ends where space and weight are limited.

Key Features

  • Solder-cup contacts: a direct soldered connection for reliable custom wiring.
  • Gold-plated pins: help maintain stable contact resistance over repeated mating cycles.
  • Nickel-plated terminals: add durability to the solder and contact areas.
  • Electrical ratings: 250VAC and 5A for signal and low-power control wiring.
  • Wide temperature range: rated from -55 to 125°C.

Specifications Explained

The 250VAC voltage rating and 5A current rating define the connector's intended electrical envelope. These figures suit signal lines, low-power control circuits, and data connections rather than mains power distribution. Insulation resistance of 1000 MOhm indicates good isolation between contacts, while contact resistance of 20 mOhm is low enough to avoid meaningful voltage drop in typical signal paths.

The -55 to 125°C operating range covers cold outdoor installations and warm enclosures alike. The plastic and metal construction keeps the shell rigid while the gold-plated pins handle the electrical contact.

Compatibility and Requirements

This is a male DB15 connector, so it mates with a female DB15 socket. It requires soldering: you will need a soldering iron, solder, and basic wire-stripping tools. A strain-relief hood or backshell is not included, so plan for one if the cable will be handled or flexed. Confirm that your device uses the DB15 interface before ordering, as pin functions vary between applications.

Typical Uses

  • Repairing or building DB15 serial and data cables
  • Game controller and joystick port connections
  • Computer video output adapters on legacy hardware
  • Linear and rotary encoder wiring in industrial settings
  • Custom test fixtures and breakout harnesses

What's in the Box

One DB15 male welded connector. No hood, screws, or cable are supplied.

Quick specs

Manufacturer
Generic
Model No. / Name
DB 15
Gender
Male
Voltage Rating (V)
250VAC
Current Rating (A)
5
Insulation Resistance (MOhm)
1000
See all specifications