Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 12V DC degaussing electromagnet delivering 15 kg of holding force in a 42 x 26 mm mild-steel body. It grips firmly while energised and releases cleanly when power is removed, making it handy for lifting, holding and demagnetising tasks.

Key Highlights

  • 15 kg holding and suction force from a compact 42 x 26 mm body
  • 12V DC operation drawing 0.8 A and 9 W
  • Releases residual magnetism when power is removed
  • M5 bolt mounting with a 15 cm connection cable
  • Works across a -20 to 120 degrees C temperature range
  • Mild-steel construction weighing about 214 g

Ideal For

  • Makers building pick-and-place or release mechanisms
  • Workshop technicians holding ferrous parts during assembly
  • Hobbyists needing a switched magnetic hold in small projects
  • Repair benches demagnetising tools and small components
  • Light automation builds using 12V DC control

Buying Tip

Check that your 12V supply can deliver at least 0.8 A and that the part you want to hold is flat, clean ferrous metal fully covering the 42 mm face.

Elecvora expert review

Our verdict

A neat, low-cost 12V electromagnet that delivers a solid 15 kg hold in a small package and releases cleanly when switched off. It is best treated as a light-duty actuator rather than a continuous industrial lifter.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact 42 x 26 mm body with 15 kg holding force
  • Simple 12V DC wiring at 0.8 A and 9 W
  • Clean release when de-energised
  • M5 mounting and 15 cm cable ease installation

Cons

  • Holding force depends on a flat, clean, thick ferrous target
  • Coil warms during long energised periods
  • Power supply and switch are not included

Best for

Makers, repair benches and light 12V holding or demagnetising tasks

Not ideal for

Heavy continuous lifting or non-ferrous materials

Specifications

Item TypeDegaussing Electromagnet
Electromagnet Force (Kg)15
Voltage Rating (V)12VDC
Current Rating (A)0.8
Model No. / Name12V KK-P40/25
Holding/ Suction Force (KG)15
Operating Voltage (VDC)12
Max. Operating Current (A)800
Power Consumption (W)9
Operating Temperature (°C)-20 to 120
Cable Length15
Bolt SizeM5
Body MaterialMild Steel
Dimensions (L x W x H) mm42 x 26 (Diameter x Length)
Weight (g)214
Shipping Weight0.25 kg
Shipping Dimensions8 × 6 × 5 cm

Frequently Asked Questions

How much can this electromagnet hold?
It is rated for up to 15 kg of holding force, but only with a flat, clean ferrous surface that fully covers the magnet face and is thick enough.
What power supply does it need?
It runs on 12V DC and draws up to 0.8 A, consuming about 9 W. Use a regulated supply with at least 1 A available.
Does it stay magnetic when switched off?
No. The magnetic effect is present only while current flows, and the design helps release residual magnetism after de-energising.
Can it demagnetise hard drives or tapes?
It can be used to demagnetise magnetic media and tools, but results depend on how the item is passed through the field and how long it is exposed.
What is included in the package?
The electromagnet with its attached 15 cm cable. Mounting bolts and a power supply are not included.
How should I mount and cool it?
Use the M5 thread to bolt it to a bracket, and leave airflow around the body during longer energised periods to limit coil heating.

Overview

The KK-P40/25 is a 12V DC degaussing electromagnet built around a mild-steel core and coil. When energised it produces up to 15 kg of holding force; when the current stops, the magnetic effect drops away, so parts release instead of staying stuck. The body measures 42 mm in diameter by 26 mm long and weighs roughly 214 g, which keeps it easy to mount in tight fixtures, jigs and small mechanisms.

Key Features

  • 15 kg holding force for lifting and securing small ferrous parts.
  • 12V DC, 0.8 A, 9 W for simple low-voltage power supplies.
  • M5 bolt mounting for secure fixing to brackets and frames.
  • 15 cm cable for quick wiring into a switched circuit.
  • Wide temperature range from -20 to 120 degrees C.

Specifications Explained

Force and voltage

The 15 kg rating is the maximum holding force under ideal conditions: a flat, clean, ferrous surface that fully covers the magnet face and is thick enough to carry the field. Rated voltage is 12V DC, and the coil draws a maximum of 0.8 A, so a modest 12V supply with at least 1 A of headroom is sensible.

Size and mounting

At 42 mm diameter and 26 mm long, the unit fits into compact assemblies. The M5 bolt thread lets you bolt it to a bracket, arm or plate, and the 15 cm cable gives enough slack for short runs to a terminal block or switch.

Heat and materials

The mild-steel body handles operating temperatures from -20 to 120 degrees C. Continuous energising still warms the coil, so give it airflow and avoid enclosing it tightly.

Compatibility and Requirements

You need a regulated 12V DC supply rated for at least 0.8 A, plus a switch or relay to control the coil. The object being held must be ferromagnetic, flat, clean and thick enough for the field to develop. No controller or driver is included.

Typical Uses

  • Lifting and placing small steel parts in assembly work.
  • Holding workpieces on jigs and fixtures during drilling or finishing.
  • Demagnetising tools and small magnetic components.
  • Release mechanisms in hobby and light automation projects.

What's in the Box

The electromagnet unit with its attached 15 cm cable. Mounting bolts and a power supply are not included.

Quick specs

Item Type
Degaussing Electromagnet
Electromagnet Force (Kg)
15
Voltage Rating (V)
12VDC
Current Rating (A)
0.8
Model No. / Name
12V KK-P40/25
Holding/ Suction Force (KG)
15
See all specifications