
1 / 3 · Click to enlarge
AI Summary
A compact 12VDC 2-way normally closed solenoid valve with 1/4" BSP female ports that opens when powered and closes when the supply is cut. Its direct-acting design and sub-50 ms response make it a simple choice for switching water, air or gas in small automation projects.
Key Highlights
- 12VDC coil with 6.5W power draw for straightforward low-voltage switching
- 2-way normally closed design opens only while power is applied
- 1/4" BSP female ports for inline plumbing and pneumatic connections
- Direct-acting operation needs no minimum pressure differential
- Fast response under 50 ms for quick on/off control
- Handles air, gas, water and liquids from -10 to 80 °C
Ideal For
- Makers and hobbyists building automated watering or dosing systems
- Pneumatics builders switching air lines with a 12V signal
- Aquarium and hydroponic enthusiasts needing a small inline shut-off valve
- Maintenance technicians servicing small fluid control loops
- Automation students learning solenoid valve control
Buying Tip
Check the flow arrow and the internal filter screen before installation, because this uni-directional valve only works correctly when plumbed inlet-to-outlet in the marked direction.
Elecvora expert review
Our verdict
A tidy, inexpensive 12V solenoid valve that does exactly what its specs promise: normally closed, direct-acting and quick to respond. It is a sensible pick for small-bore water, air and gas switching where you want simple 12V control.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Direct-acting design works without minimum pressure
- Fast sub-50 ms response
- Standard 1/4" BSP female ports
- Compact and lightweight at 0.13 kg shipping weight
- Handles water, air, gas and liquids across -10 to 80 °C
Cons
- Uni-directional, so incorrect plumbing stops it working
- Small 0.23Cv flow suits only modest flow rates
- No mounting hardware or fittings included
Best for
Small 12V automation, irrigation and pneumatic switching projects
Not ideal for
High-flow or high-pressure industrial lines beyond 1.2 MPa
Specifications
| Item Type | Normally Closed |
|---|---|
| Voltage Rating (V) | 12VDC |
| Valve Type | 2 Way Normally Closed |
| Port Size | 1/4" BSP Female Port |
| Coil Voltage | DC12V |
| Service Media | Air, Gas, Liquid, Water |
| Operation Mode | Direct Acting |
| Flow Model | Uni-Directional |
| Flow Rate | 0.23Cv (Fluid Flow) |
| Response Time(s) | Less than 50 ms |
| Pressure Range (MPa) | 1.2Mpa |
| Operating Temperature (°C) | -10 to 80 °C |
| Coil Power | 6.5W |
| Shipping Weight | 0.13 kg |
| Shipping Dimensions | 9 × 7 × 3 cm |
What's in the box
- 1 x DC 12V Solenoid Valve 1/4" 2 Way Normally Closed Direct-Acting Valve
Frequently Asked Questions
How does a normally closed solenoid valve work?
What voltage does this valve need?
Can I use it with hot water?
Does it matter which way the valve is installed?
What is included with the valve?
What maintenance does it need?
Overview
This Generic DC 12V solenoid valve is a small, electrically operated shut-off valve for controlling the flow of water, air, gas and compatible liquids in low-voltage systems. It uses a 2-way normally closed configuration: the valve stays closed when no power is present and opens as soon as 12VDC is applied to the coil. Remove the supply and it closes again, making it a practical building block for automated lines, timers and control circuits.
The body uses 1/4" BSP female ports, and the direct-acting design means the valve does not depend on a minimum pressure difference to open. That makes it flexible for low-pressure or gravity-fed setups as well as pressurised lines within its rated range.
Key Features
- 12VDC coil: operates from a 12 volt DC supply with a 6.5W power draw.
- Normally closed, 2-way: flow is blocked until the coil is energised.
- Direct acting: no pilot pressure required to open the valve.
- 1/4" BSP female ports: standard threaded connections for inline installation.
- Fast switching: response time under 50 ms.
- Broad media support: suitable for air, gas, liquid and water service.
Specifications Explained
Voltage and power: The coil is rated for 12VDC and draws 6.5W, so plan for a supply that can deliver that current continuously while the valve is open. Flow: The 0.23Cv flow coefficient describes the valve's capacity; it is a small-bore valve intended for modest flow rates rather than high-volume transfer. Pressure: The rated pressure range is up to 1.2 MPa, so keep your working pressure within that limit. Temperature: The -10 to 80 °C operating range covers many hot and cold water and air applications. Direction: The valve is uni-directional, so it must be installed with the flow going the correct way.
Compatibility and Requirements
The valve needs a 12VDC power source capable of supplying the 6.5W coil. Ports are 1/4" BSP female, so matching 1/4" BSP male fittings are required for your pipe or hose. Because the valve is uni-directional, confirm the inlet and outlet orientation before final assembly; the filter screen inside marks the inlet side. Only use media compatible with the stated service list and within the -10 to 80 °C and 1.2 MPa limits.
Typical Uses
Common applications include small irrigation and watering lines, aquarium and hydroponic top-up systems, pneumatic control circuits, water cooling loops, dosing and dispensing setups, and general automation projects where a 12V signal needs to switch a fluid or gas line.
What's in the Box
One DC 12V solenoid valve, 1/4" 2-way normally closed, direct-acting.
Quick specs
- Item Type
- Normally Closed
- Voltage Rating (V)
- 12VDC
- Valve Type
- 2 Way Normally Closed
- Port Size
- 1/4" BSP Female Port
- Coil Voltage
- DC12V
- Service Media
- Air, Gas, Liquid, Water














