Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This solenoids and electromagnets is a good fit for everyday home and hobby use. Main specs: item type Normally Closed; voltage rating (v) 24VDC; port size 1/8" NPT Female Port. Check that your power source supplies 24VDC before connecting it.

Key Highlights

  • Item Type: Normally Closed
  • Voltage Rating (V): 24VDC
  • Port Size: 1/8" NPT Female Port

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeNormally Closed
Voltage Rating (V)24VDC
Valve Type2 Way Normally Closed
Port Size1/8" NPT Female Port
Coil VoltageDC 24V
Flow ModelUni-Directional
Flow Rate0.23Cv (Fluid Flow)
Response Time(s)Less than 50 ms
Pressure Range (MPa)1.2Mpa
Operating Temperature (°C)-10 to 80 °C
Coil Power6.5W
Dimensions (L x W x H) mm57mm x 30mm x 22mm
Service MediaAir, Gas, Liquid, Water
Shipping Weight0.13 kg
Shipping Dimensions9 × 7 × 3 cm

Overview

The DC 24V Solenoid Valve 1/8" 2 Way Normally Closed Direct-Pneumatic Valves For Water Air Gas Hot is listed in our solenoids and electromagnets range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Normally Closed
  • Voltage Rating (V): 24VDC (match this to your power supply; too high a voltage can damage the part)
  • Valve Type: 2 Way Normally Closed
  • Port Size: 1/8" NPT Female Port (confirm your cable or board uses the same connector)
  • Coil Voltage: DC 24V (match this to your power supply; too high a voltage can damage the part)
  • Flow Model: Uni-Directional
  • Flow Rate: 0.23Cv (Fluid Flow)
  • Response Time(s): Less than 50 ms

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The valve works with the solenoid coil which operates electronically with DC 24 volt supply. As it is a normally closed assembly, it opens the flow of fluids as soon as it is powered ON and stops/blocks the flow when the supply voltage removed. Note:  While Connecting the Valve in the Flow pipeline, you need to mind the Input and Output direction of the valve. It will work only if you connect it in the right direction. (Hint: Inside the value, at one side you will find the filter this is the input side of the value).

Package Includes:

1 x DC 24V Solenoid Valve 1/8'' 2 Way Normally Closed Direct-Pneumatic Valves

Quick specs

Item Type
Normally Closed
Voltage Rating (V)
24VDC
Valve Type
2 Way Normally Closed
Port Size
1/8" NPT Female Port
Coil Voltage
DC 24V
Flow Model
Uni-Directional
See all specifications