Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This driver module is a good fit for makers, students and electronics hobbyists.

Key Highlights

  • Small and easy to carry or mount

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Overview

The DC 5V-12V 6V Stepper Motor Driver Mini 2-phase 4-wire 4-phase 5-wire Multifunction Step Motor Speed Controller Module Board is listed in our driver module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Basic parameters:
 
Size: 59.5mm*44mm
Voltage range: DC5V-12V
Rated current: ≤ 800mA
Power reverse connection protection: yes
Overcurrent protection: yes
Overheat protection: yes
 
Working mode:

[1] Normal mode 1: S1 start/stop button, S2 forward/backward button, W2 potentiometer speed control. If limit reversal is required, two limit switches can be connected to the P3 pin, and the motor motion shaft is mounted with contacts, so that the motor will reciprocate within the stroke between the two limit switches.
 
[2] Normal mode 2: Click S1 button to start forwards, S2 backwards, click any button again to stop. W2 potentiometer speed regulation. If the limit stop is required, two limit switches can be connected to the P3 pin, so that the motor will stop moving when it touches the limit switch, and the motor will reverse after the opposite button is clicked.
 
[3] Jog mode: S1 presses the forward rotation, releases the stop, S2 presses the reverse rotation, releases the stop, and the W2 potentiometer adjusts the speed. If a limit stop is required, the upper limit switch can be connected to P3.
 
[4] Automatic round-trip mode: S1 starts and stops, S2 is reversed, W2 potentiometer speeds, and W1 potentiometer adjusts the automatic round-trip steps. After starting, the motor automatically runs back and forth within the number of steps adjusted by W1.

Package Include:

1× Driver Module Board
1× Cable


Product Safety Information