Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 6 mm thick metal blank panel that closes unused 10-inch 1U rack slots. It mounts with four screws to keep dust out and give your rack a clean, finished front.

Key Highlights

  • 6 mm thick metal construction for a rigid filler plate
  • Fits standard 10-inch 1U rack spaces
  • Covers unused slots to reduce dust and debris entry
  • Installs with four screws using basic tools
  • Helps reserve rack space for future expansion
  • Compatible with DeskPi RackMate and similar 10-inch racks

Ideal For

  • Homelab builders assembling a 10-inch rack
  • SBC cluster owners tidying a DeskPi RackMate setup
  • Network cabinet users closing unused 1U slots
  • Makers reserving rack space for future modules

Buying Tip

Check that your rack uses 10-inch rails rather than 19-inch rails before ordering, since this panel is sized specifically for 10-inch 1U spaces.

Elecvora expert review

Our verdict

A straightforward, well-made filler panel that does exactly what a rack build needs: it closes empty 1U slots and keeps the interior cleaner. The 6 mm metal construction gives it a solid feel compared with thin plastic blanks.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Rigid 6 mm metal construction
  • Correct 10-inch 1U sizing
  • Includes mounting screws
  • Simple four-screw installation
  • Helps reduce dust entry

Cons

  • Only fits 10-inch racks, not 19-inch
  • Purely cosmetic and protective, with no functional ports

Best for

Owners of 10-inch racks who want to close unused 1U slots

Not ideal for

Builders using standard 19-inch rack rails

Specifications

Item TypeAccessory
Compatibility10-inch 1U rack spaces.
Shipping Dimensions27 × 6 × 3 cm

What's in the box

  • 1 x DeskPi RackMate Accessories Blank Panel 10 inch 1U Rack
  • 4 x 4.7 x 6.3 mm screws
  • 4 x 5 x 10 x 1 mm screws

Frequently Asked Questions

What is a blank panel used for?
It covers an unused 1U slot in a rack, which keeps dust out and gives the front of the cabinet a finished look. It can also reserve space for hardware you plan to add later.
Will it fit my rack?
It is designed for 10-inch 1U rack spaces, so check your rack rail width first. It is not intended for 19-inch racks.
Does it need power or wiring?
No. The panel is a passive metal accessory with no electrical connections or configuration.
What screws are included?
The package includes four 4.7 x 6.3 mm screws and four 5 x 10 x 1 mm screws for mounting.
How do I install it?
Align the panel with the rack rails and secure it with four screws. Tighten them evenly so the panel sits flush.
How should I care for it?
Wipe it with a dry or slightly damp cloth. Avoid abrasive cleaners that could mark the metal finish.

Overview

The DeskPi RackMate Accessories Blank Panel is a simple but useful part of a tidy rack build. It is a 1U filler plate made for 10-inch rack spaces, sized to cover slots you are not using yet. Rather than leaving an open gap in the front of your cabinet, the panel closes it off and gives the rack a more complete appearance.

Made from 6 mm thick metal, the panel is rigid enough to hold its shape in a rack and is intended to withstand normal wear in a home lab or small network cabinet. It is a passive accessory, so there is nothing to power, configure or maintain.

Key Features

  • 1U filler panel: occupies a single 1U slot in a 10-inch rack.
  • 6 mm metal build: provides a solid, stable cover for empty spaces.
  • Dust and debris barrier: helps keep the inside of the rack cleaner.
  • Four-screw mounting: quick to fit and remove with basic tools.
  • Expansion-friendly: reserve slots for future hardware while keeping the rack closed.

Specifications Explained

The key figure is the 10-inch width, which matches 10-inch rack rails rather than the wider 19-inch standard. The 1U height means the panel fills one rack unit, so you can combine several panels to close a larger opening.

The 6 mm metal thickness is what gives the panel its rigidity and its ability to shield the rack interior from dust. Because the panel is an accessory rather than a device, it has no electrical rating or data function.

Compatibility and Requirements

The panel is designed for 10-inch 1U rack spaces and is part of the DeskPi RackMate accessory range. You need a rack with matching 10-inch rails and the included screws to mount it. No power supply, cabling or software is required.

Typical Uses

  • Closing empty slots in a DeskPi RackMate or similar 10-inch rack.
  • Tidying a homelab or SBC cluster cabinet.
  • Keeping dust out of unused rack space.
  • Reserving room for future modules without leaving gaps.

What's in the Box

  • 1 x DeskPi RackMate Accessories Blank Panel 10 inch 1U Rack
  • 4 x 4.7 x 6.3 mm screws
  • 4 x 5 x 10 x 1 mm screws

Quick specs

Item Type
Accessory
Compatibility
10-inch 1U rack spaces.
Shipping Dimensions
27 × 6 × 3 cm
See all specifications