Skip to main content
Free Delivery  ·  COD Available  ·  15-Day Returns
Elecvora
DIY Micro USB Interface to 2.54mm DIP 5P Adapter Module — image 1
Hover to zoom

1 / 4 · Click to enlarge

DIY Micro USB Interface to 2.54mm DIP 5P Adapter Module

5.01 rating
Phone Model
AI Summary
Electronics for DIY enthusiasts and makers

The DIY Micro USB Interface to 2.54mm DIP 5P Adapter Module is a value-for-money electronics designed for DIY enthusiasts and makers. It features Size: 1.4*1.4*1cm and Weight: 1g. Customers praise its easy to set up and use and compact and portable.

easy to set up and usecompact and portable
₹1,375
Free Shipping💵 COD Available

Available Offers

Free Delivery on this order. No minimum order value.

15-Day Easy Returns — hassle-free return & full refund.

Secure Payment — 100% safe checkout with UPI, Cards & Net Banking.

Total: ₹1,375
Buying tip: A well-rounded choice at a fair price. Recommended for most buyers.
Estimated delivery: 24 Aug7 Sept
Free Shipping
Pan India delivery
15-Day Returns
Hassle-free policy
Secure Payment
Razorpay protected
Quality Assured
Vetted products only

Available Offers

💳

5% Cashback

Pay with UPI & get 5% cashback (up to ₹50) via Razorpay

🏦

No-Cost EMI

Available on select bank cards at checkout. 0% interest for 3 months.

📦

Free Shipping

Free delivery on all orders. No minimum order value.

💵

Cash on Delivery

COD available on orders up to ₹5,000 across India.

Quick Specs

Size: 1.4*1.4*1cm
Weight: 1g
One Package Weight: 0.02kgs / 0.05lb
One Package Size: 8cm * 6cm * 2.5cm / 3.15inch * 2.36inch * 0.98inch
Best Sellers Rank (Consumer Electronics): #4012
Best Sellers Rank (Consumer Electronics > Arduino & SCM Supplies): #365

Ideal For

Everyday convenience
Share:
SKU: S-DIY2134Category: Electronics

About This Product

The DIY Micro USB Interface to 2.54mm DIP 5P Adapter Module is a value-for-money electronics designed for DIY enthusiasts and makers. Customers highlight its easy to set up and use and compact and portable.

Key Specifications

  • Size: 1.4*1.4*1cm
  • Weight: 1g
  • One Package Weight: 0.02kgs / 0.05lb
  • One Package Size: 8cm * 6cm * 2.5cm / 3.15inch * 2.36inch * 0.98inch
  • Best Sellers Rank (Consumer Electronics): #4012
  • Best Sellers Rank (Consumer Electronics > Arduino & SCM Supplies): #365
  • Best Sellers Rank (Consumer Electronics > Arduino & SCM Supplies > Other Accessories): #94

Why Buy from Elecvora?

Elecvora sources this product directly, cutting out multiple middlemen. Every order includes free shipping, a 15-day return policy, and secure payment via Razorpay.

1. This module can easily convert power and data cable to conventional DIP 2.54mm pin 2. Great for DIY projects

Setup Guide

1
Identify the pins
Locate VCC (power), GND (ground), and data pins (SDA/SCL for I2C, MOSI/MISO for SPI, or TX/RX for UART). Refer to the pinout diagram on the product page.
2
Wire to your microcontroller
Connect VCC to 3.3V or 5V (check the module spec), GND to GND, and data pins to the appropriate GPIO pins on your Arduino or Raspberry Pi.
3
Install libraries
In Arduino IDE, go to Sketch → Include Library → Manage Libraries and search for the sensor library. Install the recommended version.
4
Upload example sketch
Open File → Examples → [library name] → Basic Example. Upload to your board and open Serial Monitor to view output.
5
Calibrate if needed
Some sensors (temperature, humidity, distance) may need a short warm-up period or calibration. Run the calibration sketch if provided.