
1 / 4 · Click to enlarge
AI Summary
A 200W industrial SMPS that turns 100–120 VAC mains into a regulated 24V DC rail at up to 8.34A. Overvoltage, overload and short-circuit protection plus sub-0.2W standby draw make it a dependable fit for continuous equipment power.
Key Highlights
- 200W output: 24V DC at up to 8.34A
- 100–120 VAC input with 4.5A input current
- OVP, OLP and SCP protection built in
- Operates reliably at temperatures up to 70°C
- Standby power consumption below 0.2W
- Tool-free installation for easy replacement
Ideal For
- Panel builders assembling 24V DC control cabinets
- Technicians replacing a failed 24V industrial supply
- Automation and equipment integrators needing a 200W rail
- Makers building enclosed 24V DC systems
- Maintenance teams servicing existing installations
Buying Tip
Check that your mains is within the 100–120 VAC input range and total your 24V load current before ordering, keeping it at or below 8.34A.
Elecvora expert review
Our verdict
The DL-200W-V24-EXC is a straightforward 200W 24V supply with the protections most installations need and a low standby draw. Its tool-free replacement design and 70°C rating make it a sensible service part for 100–120 VAC equipment.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 200W output at 24V DC and 8.34A
- OVP, OLP and SCP protection included
- Standby draw under 0.2W
- Rated for operation up to 70°C
- Tool-free installation and replacement
Cons
- Input limited to 100–120 VAC, not universal
- No output cable or mounting accessories stated in the box
- Load must stay within 8.34A at 24V
Best for
Panel builders and maintenance teams needing a replacement or new 200W 24V DC supply on 100–120 VAC mains.
Not ideal for
Users on 220–240 VAC mains or builds needing more than 8.34A at 24V.
Specifications
| Model No. / Name | DL 200W V24 EXC |
|---|---|
| Model Series | EXC |
| Rated input voltage | 100–120 VAC |
| Input current | 4.5 |
| Output Voltage | 24V DC |
| Output Current (A) | 8.34 |
| Output Power (W) | 200 |
| Operating humidity | 20–95% |
| Protection | OVP/OLP/SCP protection. |
| Operating Temperature (°C) | up to 70 |
| Standby power consumption | <0.2W |
| Length (mm) | 160 |
| Width (mm) | 100 |
| Weight (g) | 402 |
| Dimensions (L x W x H) mm | 170 x 130 x 130 |
| Installation | Tool-Free, Easy Replacement |
| Shipping Weight | 0.426 kg |
| Shipping Dimensions | 16 × 10 × 4 cm |
What's in the box
- 1 x DONE DL-200W-V24-EXC SMPS Power Supply
Frequently Asked Questions
What output does this supply provide?
What input voltage does it accept?
What protections are built in?
What is included with the power supply?
How much standby power does it use?
What are the operating conditions?
Overview
The DONE DL-200W-V24-EXC is a switching-mode power supply from the EXC series, rated at 200W output. It accepts 100–120 VAC input and delivers a regulated 24V DC rail at up to 8.34A, making it a practical building block for equipment that runs on 24V DC. The housing measures 160mm long and 100mm wide, and the unit weighs about 402g, so it fits neatly into compact panels and enclosures.
Protection is handled on board: overvoltage protection (OVP), overload protection (OLP) and short-circuit protection (SCP) are all included. Standby consumption is under 0.2W, and the supply is designed to keep working at ambient temperatures up to 70°C with 20–95% operating humidity.
Key Features
- 200W regulated output: 24V DC at 8.34A for steady low-voltage loads.
- 100–120 VAC input: matches standard mains in the intended input range, drawing about 4.5A.
- Triple protection: OVP, OLP and SCP guard the supply and connected equipment.
- Low standby draw: under 0.2W when the load is idle.
- Tool-free installation: designed for quick, easy replacement in existing setups.
- Wide humidity tolerance: rated for 20–95% operating humidity.
Specifications Explained
Output: 24V DC at 8.34A equals the rated 200W. Plan connected loads to stay within that current so the supply is not pushed into overload.
Input: the rated input is 100–120 VAC with 4.5A input current. Confirm your mains supply falls in this range before wiring.
Protection: OVP, OLP and SCP mean the unit reacts to overvoltage, excessive load and short circuits rather than passing the fault downstream.
Thermal and environmental: operation up to 70°C and 20–95% humidity suit enclosed industrial environments, though airflow around the case still helps.
Size and weight: 160mm x 100mm body, 402g unit weight, shipped at 0.426kg in a 16 x 10 x 4cm carton.
Compatibility and Requirements
This model is intended for 100–120 VAC mains input and 24V DC loads drawing no more than 8.34A. It is a Class I style installation with tool-free replacement, so it suits equipment bays where a supply may need to be swapped. No output cable, mounting hardware or load device is stated as included beyond the power supply itself.
Typical Uses
- Powering 24V DC control and relay circuits in cabinets
- Supplying sensors, controllers and low-voltage automation hardware
- Bench and equipment-rack power for 24V devices
- Replacement supply in existing 24V installations
What's in the Box
- 1 x DONE DL-200W-V24-EXC SMPS Power Supply
Quick specs
- Model No. / Name
- DL 200W V24 EXC
- Model Series
- EXC
- Rated input voltage
- 100–120 VAC
- Input current
- 4.5
- Output Voltage
- 24V DC
- Output Current (A)
- 8.34















