Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A dual-fan aluminium heat sink designed for the Raspberry Pi 3B+ and 4B, keeping the board cooler under sustained load. It arrives with thermal tape and mounting hardware, so no extra parts are needed.

Key Highlights

  • Dual fans and aluminium alloy heat sink for active cooling
  • Fits Raspberry Pi 4B and 3B+ boards
  • Open-frame design keeps every port and slot accessible
  • Lightweight at about 25 g with minimal bulk
  • Thermal tape and mounting hardware included
  • Compact footprint of roughly 51 x 25 x 12 mm

Ideal For

  • Raspberry Pi 4B owners running long, sustained workloads
  • Home lab and server builders using a Pi 3B+ or 4B
  • Retro gaming and media centre enthusiasts
  • Makers adding active cooling to an open-frame build
  • Classrooms and workshops sharing Raspberry Pi boards

Buying Tip

Confirm your board is a Raspberry Pi 4B or 3B+ before ordering, and apply the supplied thermal tape evenly so the heat sink makes full contact.

Elecvora expert review

Our verdict

A practical, low-cost cooling upgrade for the Pi 4B and 3B+ that adds active airflow without covering the ports. It is a sensible pick for anyone running sustained workloads on these boards.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Dual fans provide active airflow over the heat sink
  • Open-frame design keeps all ports and slots usable
  • Very light at around 25 g
  • Thermal tape and mounting hardware included

Cons

  • Fans require power and add a small amount of noise
  • Only listed for Pi 4B and 3B+, not other models
  • Thermal tape must be applied carefully for good contact

Best for

Raspberry Pi 4B and 3B+ builds that run continuously under load

Not ideal for

Boards other than the Raspberry Pi 4B and 3B+

Specifications

CompatibilityPi 4B, Pi 3B+
Weight (g)25
Shipping Weight0.025 kg
Shipping Dimensions6 × 3 × 1 cm

What's in the box

  • 1 x Double Fans Radiator for Raspberry Pi 3B+/4B
  • 2 x small heat sinks
  • Thermal tape

Frequently Asked Questions

Which Raspberry Pi boards does this radiator fit?
It is designed for the Raspberry Pi 4B and 3B+. It is not listed as compatible with other models, so check your board first.
Do I need thermal paste or tape?
Thermal tape is included and should be applied for proper heat conduction. Heat sink paste can be used instead if you prefer.
How are the fans powered?
The product data does not specify the fan power connector, so check the fan leads on arrival and connect them according to your board setup.
What is included in the package?
You receive one double-fan radiator, two small heat sinks and thermal tape. Nuts, bolts and a key are also supplied for mounting.
Will it block the ports on my Pi?
No. The open-frame design is made so all ports and slots on the Pi 4 Model B remain accessible.
How should I care for the cooler?
Keep the fans and fins free of dust with occasional gentle cleaning, and check that the mounting hardware stays snug.

Overview

The Double Fans Radiator is a cooling accessory made for the Raspberry Pi 3B+ and 4B. It combines a black aluminium alloy heat sink with two fans in an open-frame format, so heat is pulled away from the board while the ports and slots remain fully usable. The result is a small, light add-on that helps your Pi stay comfortable during longer sessions of work.

Key Features

  • Dual fan setup: two fans move air across the heat sink for faster heat dissipation than a passive sink alone.
  • Aluminium alloy body: a metal heat sink with a black finish that is lightweight and durable.
  • Open case design: all ports and slots of the Pi 4 Model B line up with the frame, so nothing is blocked.
  • Lightweight build: at around 25 g, it barely changes the feel of your setup.
  • Ready to mount: thermal tape, nuts, bolts and a key are included for fixing the sink to the board.

Specifications Explained

The headline numbers are simple. The unit measures roughly 51 x 25 x 12 mm and weighs about 25 g, which makes it one of the smallest cooling upgrades you can add. Compatibility covers the Pi 4B and 3B+, so it fits two of the most common boards in use today. The aluminium alloy construction is chosen for heat transfer, while the twin fans handle the airflow side of the job. Shipping weight is listed at 0.025 kg with a 6 x 3 x 1 cm shipping size, so it is a small parcel that is easy to store or send.

Compatibility and Requirements

This radiator is intended for the Raspberry Pi 4B and 3B+. It is not listed as compatible with other board models, so check your board before ordering. You will need to apply the supplied thermal tape between the heat sink and the board for proper heat conduction. If you prefer, heat sink paste can be used instead of the tape. The included nuts, bolts and key are used to secure the assembly.

Typical Uses

This cooler suits Pi 4B and 3B+ builds that run for long periods: home servers, media players, retro gaming setups, network services and small automation projects. It is also a sensible choice for classrooms and workshops where boards are shared and need to stay stable.

What's in the Box

  • 1 x Double Fans Radiator for Raspberry Pi 3B+/4B
  • 2 x small heat sinks
  • Thermal tape

Quick specs

Compatibility
Pi 4B, Pi 3B+
Weight (g)
25
Shipping Weight
0.025 kg
Shipping Dimensions
6 × 3 × 1 cm
See all specifications