
1 / 3 · Click to enlarge
AI Summary
The Dragino LoRaST is a compact STM32L072-based LoRa module with SX1276/78 radio, preloaded LoRaWAN 1.0.2 firmware, and AT command support. It gives developers a ready-to-program, long-range wireless platform for low-power IoT sensor nodes.
Key Highlights
- STM32L072CZT6 MCU with 192 KB flash, 20 KB SRAM
- SX1276/78 LoRa modem for long-range spread spectrum
- Preloaded LoRaWAN 1.0.2 firmware and AT command set
- Ultra-low 2.7 µA STOP mode at 3.3 V
- 22 digital I/Os, 3x 12-bit ADC, 1x 12-bit DAC
- Compact 42 x 22 mm board, only 4 g
Ideal For
- IoT developers prototyping LoRaWAN sensor nodes
- Embedded engineers needing an STM32L0-based radio module
- System integrators building smart metering or irrigation networks
- Makers exploring long-range low-power wireless communication
- Product teams evaluating open-source LoRa hardware
Buying Tip
Check that your gateway and network server support LoRaWAN 1.0.2 before ordering, and plan for an external antenna connection via the I-Pex connector.
Elecvora expert review
Our verdict
The Dragino LoRaST is a well-integrated STM32L0 plus LoRa module that removes the RF design work from IoT prototyping. Its preloaded LoRaWAN firmware and AT command interface make first contact quick, while the open-source HAL base supports deeper customisation.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- STM32L072CZT6 with generous 192 KB flash and 20 KB SRAM
- Preloaded LoRaWAN 1.0.2 firmware and AT commands
- Very low 2.7 µA STOP current for battery nodes
- Multiple serial interfaces and 22 digital I/Os
- Compact 42 x 22 mm, 4 g board
Cons
- Antenna is supplied unsoldered and requires assembly
- No onboard USB or battery holder; external wiring needed
- Custom firmware development requires STM32 toolchain familiarity
Best for
Developers and integrators building long-range, low-power LoRaWAN sensor nodes
Not ideal for
Users wanting a plug-and-play USB LoRa dongle with no soldering or coding
Specifications
| Model No. / Name | Dragino Modules |
|---|---|
| Voltage Rating | 1.9 to 3.6 |
| Input Voltage (V) | 1.9 to 3.6 |
| MCU Type | STM32L072CZT6 |
| Flash Memory | 192 |
| SRAM | 20 |
| EEPROM | 6 |
| Clock Speed | 32 Mhz |
| STOP Mode | 2.7μA @ 3.3v |
| Rx Mode | 7.2mA |
| Tx Mode | 125mA@ 20dbm |
| Length (mm) | 42 |
| Width (mm) | 22 |
| Weight (g) | 4 |
| Shipping Weight | 0.04 kg |
| Shipping Dimensions | 4 × 2 × 1 cm |
What's in the box
- 1 x LoRaST module
- 1 x LoRa antenna (unsoldered)
Frequently Asked Questions
What is the operating voltage of the LoRaST module?
Does the module come with LoRaWAN firmware?
How do I connect an antenna?
What programming interfaces are available?
What is included in the package?
What MCU and memory does the module use?
Overview
The Dragino LoRaST is an open-source IoT module that merges an STM32L072CZT6 microcontroller with an SX1276/78 LoRa transceiver. It is designed for developers who want to move from concept to working long-range sensor node without building a radio front-end from scratch. The board ships with an ISP bootloader and factory firmware that implements the LoRaWAN 1.0.2 specification, so you can bring up a network link using AT commands before writing any custom code.
Key Features
- STM32L072CZT6 MCU: 192 KB flash, 20 KB SRAM, 6 KB EEPROM, 32 MHz clock.
- SX1276/78 LoRa modem: long-range spread spectrum communication with high interference immunity.
- Low power: 2.7 µA in STOP mode at 3.3 V, 7.2 mA in receive, 125 mA at 20 dBm transmit.
- Flexible I/O: 22 digital I/Os, 3x 12-bit ADC, 1x 12-bit DAC, I2S, I2C, LPUSART1, SPI2, USB.
- Programming options: USART1, USART2, or STLINK; MCU wake-up by UART or interrupt.
- Antenna: external via I-Pex connector (antenna included, unsoldered).
Specifications Explained
The 1.9–3.6 V input range lets the module run directly from common 3.3 V rails or a single lithium cell, while the STOP-mode draw of 2.7 µA is low enough for long sleep intervals in battery-powered nodes. In receive mode the module draws 7.2 mA, and at full 20 dBm transmit it draws 125 mA, so size your power source accordingly. The STM32L072CZT6 provides 192 KB flash and 20 KB SRAM for application code and buffers, with 6 KB EEPROM for persistent settings. A 32 MHz clock keeps processing responsive without excessive current. The 42 x 22 mm footprint and 4 g weight make it easy to embed in small enclosures.
Compatibility and Requirements
The module is programmed via USART1, USART2, or STLINK, and the factory firmware is configured through AT commands. Firmware is based on STM32Cube HAL drivers, and the product is open-source with customer application examples. An external antenna connects through the I-Pex connector; the supplied antenna is unsoldered and must be attached. No other accessories are included.
Typical Uses
Typical applications include irrigation systems, smart metering, smart city infrastructure, smartphone detection, building automation, and other professional wireless sensor networks that need long range at low data rates.
What's in the Box
- 1 x LoRaST module
- 1 x LoRa antenna (unsoldered)
Quick specs
- Model No. / Name
- Dragino Modules
- Voltage Rating
- 1.9 to 3.6
- Input Voltage (V)
- 1.9 to 3.6
- MCU Type
- STM32L072CZT6
- Flash Memory
- 192
- SRAM
- 20













