Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This other esp wifi modules is a good fit for makers, students and electronics hobbyists. Main specs: item type WiFi Module; compatibility BT HC-06 Interface ESP-M2; operating temperature (°c) -40°C ~ 125°C. Check that your power source supplies 4.5V~6.0 before connecting it.

Key Highlights

  • Item Type: WiFi Module
  • Compatibility: BT HC-06 Interface ESP-M2
  • Operating Temperature (°C): -40°C ~ 125°C

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeWiFi Module
CompatibilityBT HC-06 Interface ESP-M2
Operating Temperature (°C)-40°C ~ 125°C
Operating Voltage (VDC)4.5V~6.0
Avg. Current Consumption80mA
Length (mm)40
Width (mm)17
Weight (g)5 (each)
Shipping Weight0.01 kg
Shipping Dimensions4 × 3 × 2 cm

Overview

The DT-06 WiFi Serial Port Transparent Transmission Module TTL to WIFI Compatible with BT HC-06 Interface ESP-M2 is listed in our other esp wifi modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: WiFi Module (2.4 GHz reaches further, 5 GHz is faster at short range)
  • Compatibility: BT HC-06 Interface ESP-M2 (confirm your cable or board uses the same connector)
  • Operating Temperature (°C): -40°C ~ 125°C
  • Operating Voltage (VDC): 4.5V~6.0 (match this to your power supply; too high a voltage can damage the part)
  • Avg. Current Consumption: 80mA (your supply must deliver at least this much current)
  • Length (mm): 40 (measure your mounting space before ordering)
  • Width (mm): 17 (measure your mounting space before ordering)
  • Weight (g): 5 (each) (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is DT-06 WiFi Serial Port Transparent Transmission Module TTL to WIFI Compatible with BT HC-06 Interface ESP-M2. TTL-WiFi is designed and developed based on the ESP-M2 WiFi module which is extracted from the TTL, EN, STATE and other pins. Importantly, the TTL-WiFi is already built-in the serial transparent transmission firmware and programmed, which can realize the transparent transmit the data to the cloud in the real-time, together with low-power control, status indicator. This board can replace the old wiring serial WiFi device to realize the data collection and control.

This module is already built-in the HTTP Server. Thus, it can configure the parameters by the browsers on PC or mobile phone or other smart devices, without of need of any other tools or Apps. One can connect this WiFi hotspot by PCs or phones, and other smart devices (supportable Android and Ios, Windows) with no password.
Applications:
  1. Smart home
  2. Wireless data connection and transparent transmission
  3. Smart car control
  4. Wireless serial printer
  5. LED light industrial control etc

Features:

  1. Fully compatible with the original electrical interface and physical interface for the serial transparent Bluetooth;
  2. Built-in industrial transparent transmission firmware V3.0 with stability and reliability by using the Web Configuration;
  3. Built-in high-performance WiFi module ESP-M2
  4. Support serial AT command
  5. Support re-programmable, OTA firmware update
  6. Seamless transparent transmission between serial and WiFi
  7. Built-in HTTP Web Server, support configure parameters by the web page
  8. Support re-connect automatically at WiFi STA mode and TCP Client
  9. Support set baud rate, data bit, parity check, stop bits, and/or subcontracting time
  10. Support AP enable, self-defined SSID / password, self-defined IP and network duration
  11. Automatically scan the peripheral WiFi hotspot, support STA enable, DHCP, self-defined IP
  12. Support TCP Server, TCP Client, UDP Server, UDP Client and UDP local broadcast
  13. Support DNS resolution automatically for the remote server address
  14. Support checking the status by AT command
  15. Provide IO4 to show the WiFi status
  16. Working Voltage: 4.5V~6.0V, TTL working voltage: 3.3V (compatible with 5.0V)
  17. Provided Pins: STATE, TXD, RXD, EN
  18. Average Current: 80mA; when data sent, it is 170mA; but it is 20μA at deep sleep mode
  19. Support Baud Rate (bps): 300/600/1200/2400/4800/9600/19200/38400/57600/74800/115200/230400/460800/921600/1843200/3686400

Package Includes:

1 x DT-06 WiFi Serial Port Transparent Transmission Module TTL to WIFI Compatible with BT HC-06 Interface ESP-M2

Quick specs

Item Type
WiFi Module
Compatibility
BT HC-06 Interface ESP-M2
Operating Temperature (°C)
-40°C ~ 125°C
Operating Voltage (VDC)
4.5V~6.0
Avg. Current Consumption
80mA
Length (mm)
40
See all specifications