
1 / 3 · Click to enlarge
AI Summary
A 5 V transceiver ultrasonic sensor measuring 25-600 cm with a UART auto output and IP67 waterproof transducer. It includes a driver board and internal temperature compensation for reliable distance readings in outdoor and automation projects.
Key Highlights
- Measures distances from 25 cm to 600 cm
- UART auto output for simple serial readings
- 5 V operating voltage suits common microcontrollers
- IP67 waterproof transducer for outdoor installations
- Internal temperature compensation for stable results
- Low standby current under 5 uA
Ideal For
- Makers building smart parking or bay occupancy projects
- Engineers monitoring waste bin fill levels
- Developers working on container water-level sensing
- Robotics builders needing a serial distance sensor
- Outdoor automation projects requiring a waterproof transducer
Buying Tip
Check that your controller's UART logic level matches the sensor's 5 V supply before wiring, and keep targets beyond the 25 cm minimum range for reliable readings.
Elecvora expert review
Our verdict
A practical serial distance sensor that covers a useful 25-600 cm span with outdoor-ready sealing and simple UART output. It suits automation and monitoring builds where a 5 V supply and a serial pin are already available.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide 25-600 cm measurement range
- Simple UART auto output
- IP67 waterproof transducer
- Internal temperature compensation
- Very low standby current
Cons
- Requires a regulated 5 V supply
- Minimum range of 25 cm limits close detection
- UART logic-level matching must be checked
Best for
Outdoor level monitoring and parking or bin-fill automation projects
Not ideal for
Very close-range detection under 25 cm
Specifications
| Measurement Range | 25-600cm |
|---|---|
| Model Series | UART Auto |
| Model No. / Name | DYP-A06LYU-V1.1 |
| Operating Voltage (V) | 5 |
| Shipping Weight | 0.047 kg |
| Shipping Dimensions | 10 × 8 × 4 cm |
What's in the box
- 1 x DYP-A06LYU-V1.1 transceiver ultrasonic sensor, 25-600 cm, UART auto
- 1 x Driver board
Frequently Asked Questions
What distance range does this sensor measure?
What output does the sensor provide?
What voltage does it need?
Is it suitable for outdoor use?
What is included in the package?
How should I care for the sensor?
Overview
The DYP-A06LYU-V1.1 is a transceiver ultrasonic sensor built for non-contact distance measurement between 25 cm and 600 cm. It combines the transducer and driver board into a compact package that runs from a 5 V supply and reports distance over a UART auto interface. Because the same unit sends and receives the ultrasonic pulse, mounting is straightforward and only one sensor face needs a clear path to the target.
The IP67 waterproof transducer and internal temperature compensation make the module suitable for outdoor and semi-exposed installations, while millimeter-level resolution supports applications that need more than a rough proximity reading.
Key Features
- 25-600 cm range: covers short-range presence detection through to several metres of distance measurement.
- UART auto output: delivers distance data over a serial connection without manual triggering.
- 5 V operation: matches the logic supply used by many microcontrollers and development boards.
- IP67 transducer: protected against dust and water ingress for outdoor use.
- Temperature compensation: built in to keep readings stable as ambient conditions change.
- Low standby current: draws under 5 uA when idle, helpful in battery-powered nodes.
Specifications Explained
Measurement range (25-600 cm): the minimum distance is 25 cm, so objects closer than that may not be reported reliably. Plan mounting height and target distances with this lower limit in mind.
UART auto: the sensor streams distance values over UART automatically, which keeps firmware simple. Your controller only needs a serial receive pin and a common ground.
5 V supply: power the module from a regulated 5 V rail. Confirm your microcontroller's UART logic level matches before connecting the data line.
IP67 transducer: the sensing face is protected against dust and temporary water immersion, making the unit viable for outdoor tanks, bins and parking structures.
Compatibility and Requirements
The sensor requires a regulated 5 V supply and a UART-capable host such as a microcontroller or development board. A common ground between the sensor and host is needed for reliable serial communication. The included driver board handles the transducer interface; no separate driver electronics are required.
Typical Uses
- Smart parking systems for bay occupancy detection
- Waste bin fill-level monitoring
- Container water-level detection
- Robotics and automation distance sensing
- General outdoor proximity and level projects
What's in the Box
- 1 x DYP-A06LYU-V1.1 transceiver ultrasonic sensor, 25-600 cm, UART auto
- 1 x Driver board
Quick specs
- Measurement Range
- 25-600cm
- Model Series
- UART Auto
- Model No. / Name
- DYP-A06LYU-V1.1
- Operating Voltage (V)
- 5
- Shipping Weight
- 0.047 kg
- Shipping Dimensions
- 10 × 8 × 4 cm

















