
1 / 3 · Click to enlarge
AI Summary
Waterproof ultrasonic sensor measuring 25–800 cm with PWM output and 3.3–5 V operation. Its sealed transducer and low current draw make it ideal for remote level and proximity sensing.
Key Highlights
- Measures distances from 25 cm to 800 cm
- Waterproof ultrasonic transducer for wet environments
- PWM output simplifies connection to microcontrollers
- Wide 3.3–5 V supply with under 15 mA operating current
- 15° beam divergence for focused target detection
- Internal temperature compensation from -15°C to +60°C
Ideal For
- Makers building water-level monitors for tanks or sumps
- Engineers needing a low-power proximity sensor for embedded systems
- Developers integrating PWM-based distance sensing into control projects
- Technicians monitoring levels in damp or outdoor enclosures
Buying Tip
Check that your controller can read a PWM input and that your power supply provides a stable 3.3–5 V at 15 mA or more.
Elecvora expert review
Our verdict
The DYP A07NYWB-V1.0 offers a practical balance of range, waterproofing, and low power for level and proximity sensing. Its PWM interface keeps integration simple, though the 25 cm minimum distance and response time limit some fast or close-range applications.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Waterproof transducer suits damp environments
- Wide 25–800 cm range covers many tank depths
- Very low static current for battery-powered nodes
- PWM output is easy to read with common microcontrollers
Cons
- Minimum range of 25 cm rules out very close detection
- Response time up to 2.5 s may be slow for fast-changing levels
- No mounting hardware or cable included
Best for
Low-power water-level and proximity monitoring in embedded projects
Not ideal for
Applications requiring sub-25 cm detection or millisecond response
Specifications
| Measurement Range | 25 to 800cm |
|---|---|
| Model Series | DYP A07 |
| Model No. / Name | A07NYWBV |
| Operating Voltage (V) | 3.3 to 5 |
| Static Current | <10 µA |
| Operating Current (mA) | <15 mA |
| Additional Specs. | Beam Divergence: 15° |
| Accuracy | ±(1+S×0.3%) cm |
| Response Time(s) | 0.9~2.5 |
| Shipping Weight | 0.055 kg |
| Shipping Dimensions | 10 × 6 × 5 cm |
What's in the box
- 1 x DYP-A07NYWB-V1.0 PWM Waterproof Ultrasonic Level Sensor (Measuring Range 25~800cm)
Frequently Asked Questions
What output does the sensor provide?
Can it be used in outdoor or wet conditions?
What power supply does it need?
What is the minimum measurable distance?
Is any cable or mounting bracket included?
How accurate is the sensor?
Overview
The DYP A07NYWB-V1.0 is a waterproof ultrasonic sensor built for distance measurement and level monitoring in the 25–800 cm range. It uses a sealed ultrasonic transducer and an intelligent signal processing circuit to produce stable readings with a small blind zone. The module is powered from a 3.3–5 V supply and communicates via a PWM output, making it straightforward to integrate with common microcontrollers and control boards.
With a 15° beam divergence and internal temperature compensation, the sensor maintains consistent performance across its -15°C to +60°C operating range. Its low power consumption—under 15 mA active and below 10 µA static—suits battery-conscious or remotely powered installations.
Key Features
- Long measurement range: Detects targets from 25 cm up to 800 cm.
- Waterproof transducer: Protected sensing element for use in damp or wet conditions.
- PWM output: Simple pulse-width signal for distance readout.
- High accuracy: ±(1 + S×0.3%) cm error, with minimum error under 10 mm.
- Low power: Under 15 mA operating and under 10 µA static current.
- Temperature compensation: Stable output from -15°C to +60°C.
Specifications Explained
Measurement range (25–800 cm): The sensor’s minimum distance is 25 cm, so it is not intended for very close-range detection below that point. At the top end, 800 cm allows monitoring of larger tanks or open spaces.
Accuracy ±(1 + S×0.3%) cm: Error scales with distance; at 100 cm the tolerance is about ±1.3 cm, and at 800 cm about ±3.4 cm. This is typical for ultrasonic level sensing and adequate for most monitoring tasks.
Beam divergence 15°: A relatively narrow cone helps avoid false echoes from side walls in narrow vessels, while still covering the target area.
Power (3.3–5 V, <15 mA active, <10 µA static): Compatible with 3.3 V and 5 V logic systems and suitable for low-power installations.
Response time 0.9–2.5 s: Readings update within this window; plan control loops accordingly.
Compatibility and Requirements
The sensor requires a 3.3–5 V DC supply capable of delivering at least 15 mA. It outputs a PWM signal, so the receiving device must be able to read PWM pulses. No additional components are included; wiring and mounting hardware are not supplied. The operating temperature range is -15°C to +60°C.
Typical Uses
- Water-level monitoring in tanks and sumps
- Object proximity and presence detection
- Smart detection systems
- Narrow-beam distance sensing in constrained spaces
What's in the Box
1 x DYP-A07NYWB-V1.0 PWM Waterproof Ultrasonic Level Sensor (25–800 cm).

Quick specs
- Measurement Range
- 25 to 800cm
- Model Series
- DYP A07
- Model No. / Name
- A07NYWBV
- Operating Voltage (V)
- 3.3 to 5
- Static Current
- <10 µA
- Operating Current (mA)
- <15 mA


















