
1 / 3 · Click to enlarge
AI Summary
Non-contact ultrasonic sensor that measures liquefied gas level from 3 to 100 cm with 1 mm resolution. It reports over RS485, UART or IIC from a 3.3 to 5 V supply in an IP67 housing.
Key Highlights
- Non-contact ultrasonic level measurement from 3 to 100 cm
- 1 mm resolution with 3 cm standard blind zone
- RS485, UART and IIC output options
- 3.3 to 5 V supply, operating current 20 mA or less
- IP67 dustproof and waterproof industrial housing
- Horizontal inclination detection across 0 to 180 degrees
Ideal For
- Makers building LPG cylinder level monitors
- Integrators adding remote tank level reporting
- Maintenance teams checking small liquefied gas tanks
- Industrial users needing non-contact level sensing
- Developers working with RS485, UART or IIC controllers
Buying Tip
Confirm your controller supports RS485, UART or IIC and can supply 3.3 to 5 V before ordering, and keep the liquid surface outside the 3 cm blind zone when mounting.
Elecvora expert review
Our verdict
A compact, low-power ultrasonic level sensor that covers a useful 3 to 100 cm range with fine 1 mm resolution and multiple interface options. Its IP67 housing and contactless design make it a practical choice for liquefied gas level monitoring where the sensor should not touch the contents.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Non-contact measurement keeps the sensor away from the gas
- 1 mm resolution and 3 to 100 cm range suit small tanks
- RS485, UART and IIC output plus configurable baud rates
- IP67 housing with electrostatic protection
Cons
- 3 cm blind zone limits very close readings
- Accuracy tolerance widens as measured distance increases
- Gateways for remote upload are not included
Best for
Liquefied gas level monitoring on small tanks and cylinders
Not ideal for
Applications needing measurement closer than 3 cm or a bundled wireless gateway
Specifications
| Measurement Range | 3 to 100cm |
|---|---|
| Model Series | DYP L062 |
| Model No. / Name | L062M4WV |
| Operating Voltage (V) | 3.3 to 5 |
| Operating Current (mA) | ≤20 |
| Resolution | 1mm |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 16 × 10 × 4 cm |
What's in the box
- 1 x DYP-L062M4W-V1.0 RS485 Ultrasonic Liquefied Gas Level Sensor (Measuring Range 30~1000mm)
Frequently Asked Questions
How does the sensor measure liquefied gas level?
What interfaces does it support?
What voltage does it need?
What is the blind zone?
Can I change the baud rate?
What is included in the package?
Overview
The DYP L062M4WV is an ultrasonic sensor designed to measure the liquid level of liquefied gas substances without making contact with the liquid. It belongs to the DYP L062 series and uses high-frequency ultrasonic detection to track level height inside a container, then reports the result to a host device over a digital interface.
With a detection range of 3 to 100 cm and 1 mm resolution, the sensor is suited to compact tanks and cylinders where small level changes matter. Readings can be sent over RS485, UART or IIC, making it straightforward to integrate with controllers, data loggers and remote monitoring setups.
Key Features
- Contactless measurement: ultrasonic sensing keeps the sensor clear of the liquefied gas.
- Wide detection window: covers 3 cm to 100 cm with a 3 cm standard blind zone.
- Fine resolution: 1 mm measurement steps for close level tracking.
- Flexible output: RS485, UART automatic, UART controlled and IIC interfaces.
- Low power: runs from 3.3 to 5 V and draws 20 mA or less, with sleep current below 15 uA under UART control.
- Rugged build: IP67 dustproof and waterproof housing with electrostatic protection on the input and output interfaces.
- Tilt sensing: supports horizontal inclination detection from 0 to 180 degrees.
Specifications Explained
Measurement range and blind zone: the sensor reads level between 3 cm and 100 cm. The first 3 cm is a standard blind zone, so plan mounting so the liquid surface stays outside that zone.
Resolution and accuracy: resolution is 1 mm, and accuracy is stated as plus or minus (5 + S x 1%) mm, where S is the measured value. In practice, expect tighter results at short distances and slightly wider tolerance as the measured distance grows.
Supply and current: a 3.3 to 5 V operating voltage matches common logic supplies. Current draw stays at or below 20 mA, and sleep current is under 15 uA when controlled over UART.
Interfaces and baud rate: the default baud rate is 115200, with support for 4800, 9600, 14400, 19200, 38400, 57600 and 76800. Choose the interface that matches your controller.
Environment: operating temperature is -15 to +60 degrees Celsius and storage temperature is -25 to +70 degrees Celsius. The IP67 design and IEC61000-4-2 compliant electrostatic protection suit industrial installations.
Compatibility and Requirements
The sensor needs a host with an RS485, UART or IIC interface and a 3.3 to 5 V supply. Match the baud rate on your controller to the sensor setting. For remote monitoring, the source notes that data can be uploaded through NB-IoT, HTTP or LoRaWAN gateways, but those gateways are not included and must be sourced separately.
Typical Uses
- Liquefied gas cylinder and small tank level monitoring
- Remote tank level reporting through a gateway
- Industrial or workshop level sensing where contact is unwanted
- Tilt and orientation checks alongside level readings
What's in the Box
1 x DYP-L062M4W-V1.0 RS485 Ultrasonic Liquefied Gas Level Sensor (Measuring Range 30~1000mm).

Quick specs
- Measurement Range
- 3 to 100cm
- Model Series
- DYP L062
- Model No. / Name
- L062M4WV
- Operating Voltage (V)
- 3.3 to 5
- Operating Current (mA)
- ≤20
- Resolution
- 1mm


















