Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by EBYTE, this lora module is a good fit for makers, students and electronics hobbyists. Main specs: shipping weight 0.010 kg.

Key Highlights

  • Shipping Weight: 0.010 kg

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Shipping Weight0.010 kg
Shipping Dimensions5 × 5 × 2 cm

Overview

The EBYTE E220-400M33S LLCC68 433/470MHz LoRa Spread Spectrum Technology SPI Hardware Module, made by EBYTE, is listed in our lora module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Shipping Weight: 0.010 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 5 × 5 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The E220-400M33S LoRa Wireless Module is a high-performance long-range wireless communication module designed for industrial IoT, smart agriculture, telemetry, remote monitoring, wireless sensor networks, and automation applications. Powered by Semtech’s advanced LLCC68 LoRa™ RF chip, this compact SMD module delivers ultra-long communication distances up to 16km in open environments while maintaining low power consumption and exceptional signal stability.

Integrated with a high-efficiency Power Amplifier (PA) and Low Noise Amplifier (LNA), the module provides up to 33dBm (2W) transmit power and excellent receiver sensitivity down to -129dBm. Operating in the 410~493MHz ISM frequency band, it supports LoRa and GFSK modulation for reliable wireless data transmission even in challenging environments.

Its industrial-grade design supports operation from -40°C to 85°C, making it ideal for harsh outdoor and industrial deployments. The SPI communication interface enables easy integration with microcontrollers, embedded systems, and IoT platforms.


Features:

  1. Based on Semtech LLCC68 next-generation LoRa RF chip
  2. Up to 33dBm (2W) high transmission power
  3. Long-range communication up to 16km in open areas
  4. Built-in PA and LNA for enhanced signal stability
  5. Supports LoRa and GFSK modulation methods
  6. Industrial-grade operating temperature range
  7. Ultra-low sleep current of only 1µA
  8. Compact SMD form factor with stamp hole interface
  9. SPI communication interface with up to 10Mbps speed
  10. Supports 410MHz to 493MHz ISM frequency band

Specifications:

  1. Item type : LoRa Wireless Transceiver Module
  2. RF Chip : LLCC68
  3. Frequency Range : 410~493MHz
  4. Operating Frequency : 433/470MHz
  5. Modulation Method : LoRa / GFSK
  6. Maximum Transmit Power : 33dBm (2W)
  7. Communication Distance : Up to 16km
  8. Receiver Sensitivity : Up to -129dBm
  9. Communication Interface : SPI
  10. SPI Data Rate : 0~10Mbps
  11. Operating Voltage : 3V~5.5V
  12. Recommended Voltage : 5V
  13. Logic Level : 3.3V TTL
  14. Transmit Current : 1200mA
  15. Receive Current : 12.5mA
  16. Sleep Current : 1µA
  17. Operating Temperature : -40°C to +85°C
  18. Crystal Frequency : 32MHz
  19. FIFO Buffer : 256 Bytes
  20. LoRa Data Rate : 1.76kbps~62.5kbps
  21. GFSK Data Rate : 0.6kbps~300kbps
  22. RF Interface : Stamp Hole / IPEX
  23. Antenna Impedance : 50Ω
  24. Package Type : SMD
  25. Mounting Type : Surface Mount
  26. Module Dimensions : 38.5 × 24mm
  27. Product Weight : 5.85g

Package Includes:

1 x EBYTE E220-400M33S LLCC68 433/470MHz LoRa Spread Spectrum Technology SPI Hardware Module

Quick specs

Shipping Weight
0.010 kg
Shipping Dimensions
5 × 5 × 2 cm
See all specifications