Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact water sensor module that detects liquid presence via exposed traces and a 1 MΩ pull-up resistor. It connects easily to Crowtail base boards for rain, leak, or overflow detection projects.

Key Highlights

  • Detects water using exposed interlaced sensor and ground traces
  • Built-in 1 MΩ pull-up resistor keeps signal high until water bridges
  • Crowtail-compatible interface for quick connection to base boards
  • Low power consumption suitable for continuous monitoring
  • High sensitivity for reliable liquid contact detection
  • Compact dimensions of 40 x 20 x 6.8 mm

Ideal For

  • Makers building DIY rain detectors
  • Students learning about sensors and microcontrollers
  • Homeowners needing a simple leak alarm
  • Gardeners automating plant watering
  • Engineers prototyping liquid detection systems

Buying Tip

Remember that this sensor requires a Crowtail base board or compatible shield to connect to your microcontroller; it is not a stand-alone module.

Elecvora expert review

Our verdict

The ELECROW Crowtail Water Sensor is a straightforward, reliable module for basic water detection. Its Crowtail interface simplifies wiring, making it a good choice for beginners and educators.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Easy plug-and-play with Crowtail base boards
  • Low power consumption for long-term monitoring
  • Compact and lightweight design
  • Simple digital output easy to read

Cons

  • Requires a Crowtail base board or compatible shield
  • Operating temperature range limited to 10-30 °C
  • Exposed traces may corrode over time with prolonged water contact

Best for

Educational projects and simple water detection tasks

Not ideal for

Industrial or high-precision liquid measurement

Specifications

Item TypeSensor
Model No. / NameWater Sensor
Resistor1 MΩ
Operating Temperature (°C)10 to 30
Dimensions (L x W x H) mm40.0 x 20.0 x 6.8
Shipping Weight0.01 kg
Shipping Dimensions12 × 8 × 2 cm

What's in the box

  • 1 x Crowtail Water Sensor module

Frequently Asked Questions

How does the water sensor detect water?
The sensor has exposed traces connected to ground and sensor traces. When water bridges them, it shorts the sensor trace to ground, changing the digital signal.
What is the purpose of the 1 MΩ resistor?
The 1 MΩ pull-up resistor keeps the sensor trace at a high logic level when dry. Water creates a conductive path that pulls the signal low, indicating detection.
Can I use this sensor without a Crowtail base board?
The sensor has a Crowtail-specific interface, so it requires a Crowtail base board or compatible shield for connection. It is not designed for direct wiring to breadboards without an adapter.
What is included in the package?
The package includes one Crowtail Water Sensor module only. A Crowtail base board and microcontroller are not included.
How should I care for the sensor?
After exposure to water, dry the sensor to prevent corrosion. Avoid leaving it submerged for extended periods and operate within the specified temperature range of 10 to 30 °C.

Overview

The ELECROW Crowtail Water Sensor is a simple yet effective module for detecting the presence of water. It uses a series of exposed traces: some connected to ground and others acting as sensor traces interlaced between them. A weak pull-up resistor of 1 MΩ holds the sensor trace at a high logic level until a drop of water bridges the gap to a grounded trace, pulling the signal low. This change can be read by the digital I/O pins of a Crowduino or other compatible microcontroller, allowing you to detect water contact and even estimate the amount of water-induced contact.

Key Features

  • Crowtail compatible interface: Plugs directly into Crowtail base boards for hassle-free wiring.
  • Low power consumption: Suitable for battery-powered or continuous monitoring applications.
  • High sensitivity: Detects even small amounts of water across the exposed traces.
  • Compact size: Measures just 40.0 x 20.0 x 6.8 mm, fitting into tight enclosures.
  • Simple operation: Works with digital I/O pins; no complex calibration required.

Specifications Explained

1 MΩ pull-up resistor: This resistor keeps the sensor trace at a high voltage when dry. When water creates a conductive path to ground, the voltage drops, signaling water presence. The high resistance minimizes power consumption and corrosion.

Operating temperature 10 to 30 °C: The sensor is designed for use in moderate ambient conditions. Avoid exposing it to extreme heat or freezing temperatures.

Dimensions 40.0 x 20.0 x 6.8 mm: The small board is easy to mount on walls, inside tanks, or on rain collectors. Shipping weight is only 0.01 kg, so it adds negligible load to your project.

Compatibility and Requirements

The module features a Crowtail interface, making it directly compatible with Crowtail base boards and Crowduino boards. You will need a Crowtail base board or compatible shield to connect the sensor. The sensor output can be read by any digital I/O pin on the microcontroller. No additional external components are required for basic operation.

Typical Uses

  • Rainfall detection for weather stations
  • Liquid leakage alarms in basements or equipment rooms
  • Tank overflow detection in water storage systems
  • Educational projects demonstrating conductivity and sensing

What's in the Box

1 x Crowtail Water Sensor module.

Quick specs

Item Type
Sensor
Model No. / Name
Water Sensor
Resistor
1 MΩ
Operating Temperature (°C)
10 to 30
Dimensions (L x W x H) mm
40.0 x 20.0 x 6.8
Shipping Weight
0.01 kg
See all specifications