Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The ELEGOO Mercury 3.0 combines a 7.5L wash tank with a 360° UV curing chamber for resin prints. It handles larger models and batches, with dual washing modes and touch-controlled timers up to 30 minutes.

Key Highlights

  • 7.5L cleaning capacity for larger prints and batch washing
  • Dual basket and hanging wash modes for flexible workflows
  • 24 405nm UV LEDs with turntable for 360° curing
  • Reflective mirrors under the turntable improve lower-side exposure
  • Touch panel with adjustable wash and cure times up to 30 minutes
  • Anti-UV cover and safety micro switch for contained operation

Ideal For

  • Resin 3D printing hobbyists upgrading from a compact wash and cure unit
  • Small workshops running several resin prints per day
  • Makers producing larger models that exceed small tank sizes
  • Users who want washing and curing in one bench-top machine
  • Anyone printing with LCD, DLP or SLA resin printers

Buying Tip

Measure your tallest and widest prints against the 250 x 290mm curing envelope and the 230 x 135 x 260mm wash volume before ordering, since the two capacities differ.

Elecvora expert review

Our verdict

The Mercury 3.0 is a sensible step up for resin printers who need more room than a compact station offers. The 7.5L tank, dual wash modes and 24-LED curing chamber cover the full post-processing routine in one machine.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 7.5L wash tank with two loading modes
  • Large 250 x 290mm curing envelope
  • 24 405nm UV LEDs with rotating turntable and mirrors
  • Touch control with timers up to 30 minutes
  • Safety micro switch and anti-UV cover

Cons

  • Cleaning liquid is not included
  • Wash volume shrinks when the build plate is fitted
  • Bench footprint is larger than compact units

Best for

Resin printers handling larger models or batches who want washing and curing in one station

Not ideal for

Users with very limited bench space or only tiny prints

Specifications

Model No. / NameMercury 3.0
Max Capacity7.5L for cleaning
Volume230mm x 135mm x 260mm (without build plate), 214mm x 135mm x 180mm (with build plate) for washing
Curing Size (mm)∅250 x 290
Control Method100-240V, 50/60Hz, 24V, 2.5A
Power Requirements302.5 x 302.5 x 412.5
Dimensions (L x W x H) mm302.5 x 302.5 x 412.5
Shipping Weight6.3 kg
Shipping Dimensions38 × 38 × 50 cm

What's in the box

  • 1 x ELEGOO Mercury 3.0 wash and cure station

Frequently Asked Questions

What is the maximum washing volume?
Without the build plate the wash volume is 230 x 135 x 260mm. With the build plate fitted it is 214 x 135 x 180mm, and the tank holds 7.5L of cleaning liquid.
How large a print can I cure?
The curing area is 250mm in diameter by 290mm in height, so parts must fit within that cylinder on the turntable.
Which printers is it compatible with?
It works with most LCD, DLP and SLA resin 3D printers and is designed as a match for ELEGOO resin printers.
What power does it need?
The input is 100-240V at 50/60Hz, converted to 24V 2.5A internally, so it suits different regional mains voltages with the correct plug.
Does the UV light stop when the cover is open?
Yes. A safety micro switch stops curing when the cover is removed, and the anti-UV cover blocks UV rays during normal operation.
How long can I set the wash and cure timers?
The touch panel allows adjustable wash and cure durations of up to 30 minutes per cycle.

Overview

The ELEGOO Mercury 3.0 is a two-in-one post-processing station for resin 3D printing. It gives you a wash tank and a UV curing chamber in a single footprint, so parts move from cleaning to final cure without a separate machine. The unit is aimed at users who have outgrown compact cleaners and need room for bigger models or several prints at once.

Key Features

  • 7.5L wash capacity with a maximum washing volume of 230 x 135 x 260mm when the build plate is not fitted.
  • Two washing modes: a basket mode for loose parts and a hanging mode for prints still attached to the build plate.
  • 360° UV curing using 24 405nm UV lights around a rotating turntable.
  • Reflective mirrors beneath the turntable to reach undersides and recessed areas.
  • Touch panel control with adjustable wash and cure durations up to 30 minutes.
  • Upgraded POM bearing for smooth rotation during washing.
  • Anti-UV cover that blocks UV rays, plus a safety micro switch that stops curing when the cover is lifted.

Specifications Explained

The cleaning tank holds 7.5L, which is the headline number for buyers comparing stations. The washing volume differs depending on how you load it: without the build plate you get 230 x 135 x 260mm, and with the build plate fitted the working area is 214 x 135 x 180mm.

Curing is separate from washing. The curing size is a 250mm diameter circle by 290mm in height, so tall prints and wide parts both fit as long as they sit within that envelope. The turntable rotates parts through the light from 24 UV LEDs, and the mirrors below help expose surfaces that would otherwise face away from the lights.

The station measures 302.5 x 302.5 x 412.5mm and ships at 6.3kg in a 38 x 38 x 50cm carton. Power input is 100-240V at 50/60Hz, stepping down to 24V 2.5A, so the same unit works across different regional mains voltages with the appropriate plug.

Compatibility and Requirements

The Mercury 3.0 is designed to work with most LCD, DLP and SLA resin 3D printers and is a natural match for ELEGOO resin printers. You will need a suitable power outlet within the 100-240V, 50/60Hz range and enough bench space for a unit roughly 30cm square and 41cm tall. Washing requires resin-appropriate cleaning liquid in the tank, which is not part of the package.

Typical Uses

Use the basket mode to rinse small parts, supports and bits of detail work in one batch. Use hanging mode when a print is still on the build plate and you want to wash it before removal. After washing and drying, move parts to the curing chamber for a timed UV session. The larger chamber makes it practical to cure several models together or handle taller display pieces that would not fit a compact unit.

What's in the Box

The package contains one ELEGOO Mercury 3.0 wash and cure station. Check the carton for the station, cover and accessories when it arrives.

Quick specs

Model No. / Name
Mercury 3.0
Max Capacity
7.5L for cleaning
Volume
230mm x 135mm x 260mm (without build plate), 214mm x 135mm x 180mm (with build plate) for washing
Curing Size (mm)
∅250 x 290
Control Method
100-240V, 50/60Hz, 24V, 2.5A
Power Requirements
302.5 x 302.5 x 412.5
See all specifications