Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 7 mm diameter, 2 mm thick ERM coin vibration motor rated at 3 VDC, 85 mA, and 8000 RPM. Its flat, shaftless design lets you mount it directly on a PCB or inside a small housing for compact haptic feedback.

Key Highlights

  • Ultra-compact 7 mm diameter, 2 mm thickness
  • 3 VDC rated voltage, 85 mA current draw
  • 8000 RPM rated speed for clear vibration
  • Shaftless coin design mounts on PCB or housing
  • Starts at 2.5 VDC for low-voltage projects
  • Lightweight 0.01 kg shipping weight

Ideal For

  • Electronics hobbyists building haptic feedback projects
  • Product designers prototyping compact wearables
  • Repair technicians replacing vibration motors in small devices
  • Makers integrating vibration alerts into PCB designs

Buying Tip

Check that your power source can supply 3 VDC at 85 mA and that you have a way to connect wires to the motor's terminals before ordering.

Elecvora expert review

Our verdict

A tiny, flat vibration motor that is easy to integrate into compact designs, provided you can handle the soldering and current requirements. It delivers reliable haptic feedback at a low cost.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Very small 7 mm diameter and 2 mm thickness
  • Low starting voltage of 2.5 VDC
  • High 8000 RPM speed for its size
  • Lightweight and easy to mount on PCBs

Cons

  • Requires soldering or custom wiring
  • No connector or wires included
  • Needs a power source capable of 85 mA at 3 V

Best for

Compact DIY electronics and wearables needing basic haptic feedback

Not ideal for

Applications requiring pre-attached wires or plug-and-play installation

Specifications

Item TypeERM Coin Type
Voltage Rating (V)3VDC
Current85
Rated Speed (RPM)8000
Diameter (mm)7
Rated current (mA)85
Rated Voltage (VDC)3
Width (mm)2.1
Shipping Weight0.01 kg
Shipping Dimensions9 × 7 × 1 cm

What's in the box

  • 1 x ERM Coin Vibration Motor, 7 mm Dia., 2 mm thickness

Frequently Asked Questions

What voltage does this motor require?
The motor is rated for 3 VDC and has a starting voltage of 2.5 VDC. Do not exceed the rated voltage to avoid damage.
How much current does it draw?
At 3 VDC, the motor draws approximately 85 mA. Ensure your power supply can provide at least this current.
Does it come with wires or a connector?
No, the motor is a bare component. You will need to solder wires or attach a suitable connector yourself.
Can I mount it directly on a PCB?
Yes, the flat shaftless design allows direct mounting on a PCB or housing wall, but make sure the rotating mass is not obstructed.
What is included in the package?
The package includes one ERM coin vibration motor with a 7 mm diameter and 2 mm thickness.
How should I care for the motor?
Keep the motor dry and free from dust and debris. Avoid applying excessive force or dropping it, as the internal components are delicate.

Overview

The ERM coin vibration motor is a flat, shaftless pancake motor designed for space-constrained electronics. With a 7 mm diameter and 2 mm thickness, it provides a compact vibration source that can be attached directly to a PCB or the inner wall of a product housing. This motor is rated at 3 VDC and draws 85 mA, reaching a rated speed of 8000 RPM for noticeable haptic feedback. It is a practical component for DIY projects, wearables, and small devices where a low-profile vibration alert is needed.

Key Features

  • Compact coin form factor: 7 mm diameter and 2 mm thickness fit tight spaces.
  • 3 VDC operation: Matches common low-voltage electronics and battery-powered designs.
  • 85 mA current draw: Suitable for circuits that can supply this current at 3 V.
  • 8000 RPM rated speed: Delivers a clear vibration for alerts and tactile feedback.
  • Shaftless design: No external shaft, so it can be mounted directly on a PCB or housing wall.
  • Low starting voltage: Begins vibrating at 2.5 VDC, useful for gradually increasing drive voltage.

Specifications Explained

Voltage rating (3 VDC): This is the nominal voltage for continuous operation. The motor can start at 2.5 VDC, but for full rated performance, supply 3 V. Current (85 mA): At 3 V, the motor draws about 85 mA, so your power source or driver should handle this current. Rated speed (8000 RPM): Higher RPM generally means stronger vibration; 8000 RPM is a solid level for small haptic alerts. Diameter and thickness (7 mm and 2 mm): These dimensions determine the mounting space needed and make the motor one of the thinnest coin types available. Starting voltage (2.5 VDC): The minimum voltage at which the motor begins to turn, giving flexibility in low-power designs.

Compatibility and Requirements

This motor requires a 3 VDC power source capable of supplying at least 85 mA. It is a bare component, so you will need to solder wires or use a suitable connector to integrate it into your circuit. The flat, shaftless design allows direct mounting on a PCB or housing wall, but ensure the mounting method does not obstruct the rotating mass. No additional driver is included; you must provide the appropriate voltage and current within the stated ratings.

Typical Uses

  • DIY electronics projects needing haptic feedback
  • Wearable devices and small gadgets
  • PCB-mounted vibration alerts
  • Repair or replacement in compact devices
  • Prototyping tactile interfaces

What's in the Box

Package includes: 1 x ERM Coin Vibration Motor, 7 mm Dia., 2 mm thickness.

Quick specs

Item Type
ERM Coin Type
Voltage Rating (V)
3VDC
Current
85
Rated Speed (RPM)
8000
Diameter (mm)
7
Rated current (mA)
85
See all specifications