Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This electronics is a good fit for makers, students and electronics hobbyists.

Key Highlights

  • Wireless connection

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Overview

The ESP32-C3 Internet of Things Development Board WiFi+5.0 bluetooth Dual-mode Module Wireless Communication Module is listed in our electronics range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

MCU:

• Built-in ESP32-C3FH4 or ESP32-C3FN4 chip, RISC-V 32-bit single-core microprocessor, the maximum frequency is 160MHz
• 4MB embedded flash
• 384KBROM
• 400KB SRAM (of which 16KB is dedicated to cache)
• 8KBRTCSRAM

WiFi:

• Support IEEE802.11b/g/n protocol
• Working channel center frequency range: 2412~2484MHz
• Supports 20MHz and 40MHz bandwidth in the 2.4GHz frequency band
• Support 1T1R mode, data rate up to 150Mbps
• Wireless Multimedia (WMM)
• Frame aggregation (TX/RXA-MPDU, TX/RXA-MSDU)
• Immediate Block ACK (ImmediateBlockACK)
• Fragmentation and reorganization (Fragmentationanddefragmentation)
• Transmission opportunity (Transmissionopportunity, TXOP)
• Beacon automatic monitoring (hardware TSF)
• 4 × virtual Wi-Fi interface
• Support infrastructure network (InfrastructureBSS) Station mode, SoftAP mode, Station+SoftAP mode and promiscuous mode at the same time. Please note that when the ESP32-C3 series scans in Station mode, the SoftAP channel will change at the same time
• Antenna diversity
• 802.11mcFTM

Bluetooth:

• Bluetooth Low Energy (BluetoothLE): Bluetooth5, Bluetoothmesh
• Rate support 125Kbps, 500Kbps, 1Mbps, 2Mbps
• Broadcast Extensions (AdvertisingExtensions)
• Multiple Advertisement (MultipleAdvertisementSets)
• Channel Selection (ChannelSelectionAlgorithm#2)

Hardware:

• Module interface: GPIO, SPI, UART, I2C, I2S, infrared remote control (remotecontrolperipheral), LEDPWM controller, general DMA controller, TWAI® controller (compatible with ISO11898-1), USB serial port/JTAG controller, temperature sensor , SAR A/D converter
• 40MHz integrated crystal oscillator
• Working environment temperature: –85°C version module: –40~85°C–105°C version module: -40~105°C

Package incldued:

1 x ESP-C3-12F-Kit Series Development Board




Product Safety Information

Explore more