Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This relay module is a good fit for makers, students and electronics hobbyists. Main specs: microcontroller ESP32-S3 (Default module: ESP32-S3-WROOM-1U-N16, customizable for other modules); wireless communicatoin 2.4GHz WiFi (802.11 b/g/n)、Bluetooth 5, BLE; usb Connector.

Key Highlights

  • Wireless connection
  • Microcontroller: ESP32-S3 (Default module: ESP32-S3-WROOM-1U-N16, customizable for other modules)
  • Wireless communicatoin: 2.4GHz WiFi (802.11 b/g/n)、Bluetooth 5, BLE
  • USB: Connector

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

MicrocontrollerESP32-S3 (Default module: ESP32-S3-WROOM-1U-N16, customizable for other modules)
Wireless communicatoin2.4GHz WiFi (802.11 b/g/n)、Bluetooth 5, BLE
USBConnector
Power supply5V
FunctionsPower supply, USB communication, firmware downloading, etc.
ISOLATED RS485Connector
Direction controlHardware automatic control
ProtectionTVS diode, surge protection & ESD protection
ResistorOnboard reserved 120R matching resistor, NC by default, enabled via jumper
Expanded interfaceOnboard 40PIN header compatible with some Raspberry Pi Pico HAT, easy to expand other functions such as RTC / CAN / RS232 / LoRa / sensor, etc
RelayContact rating
Relay channels6
Contact form1NO 1NC
IsolationOptocoupler isolation
LED indicatorsRGB
PWRRed power indicator, lights up when there is USB connection and voltage is detected
TXDGreen TX indicator, lights up when the RS485 port sends data
RXDBlue RX indicator, lights up when the device port sends data back
power supply Screw terminalVoltage range
AppearanceEnclosure
Dimensions145 × 90 × 40mm

Overview

The ESP32-S3 Industrial 6-Channel RS485 Relay Module IOT WiFi Bluetooth Onboard Pico HAT Interface with Built-In Protection Circuits is listed in our relay module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Microcontroller: ESP32-S3 (Default module: ESP32-S3-WROOM-1U-N16, customizable for other modules) (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Wireless communicatoin: 2.4GHz WiFi (802.11 b/g/n)、Bluetooth 5, BLE (check your phone or controller supports the same Bluetooth version for full range)
  • USB: Connector (confirm your cable or board uses the same connector)
  • Power supply: 5V
  • Functions: Power supply, USB communication, firmware downloading, etc.
  • ISOLATED RS485: Connector (confirm your cable or board uses the same connector)
  • Direction control: Hardware automatic control
  • Protection: TVS diode, surge protection & ESD protection

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.


Specification:
Model: ESP32-S3-Relay-6CH
Microcontroller: ESP32-S3-WROOM-1U-N8
Wireless Communication: 2.4GHz Wi-Fi (802.11 b/g/n), Bluetooth 5 (BLE)
Power Supply Voltage: DC 7–36V
Relay Channels: 6 (with contact rating ≤10A 250VAC/30VDC)
Dimensions: 145 × 90 × 30 mm

Features:
- Based on ESP32-S3 microcontroller with Xtensa 32-bit LX7 dual-core processor, capable of running at 240 MHz - Integrated 2.4GHz Wi-Fi and Bluetooth LE dual-mode wireless communication, with superior RF performance - High quality relay, contact rating: ≤10A 250VAC/30VDC - Onboard isolated RS485 interface, for connecting to various RS485 Modbus industrial modules or sensors - Onboard 40PIN header compatible with some Raspberry Pi Pico HAT, for expanding more functions such as RTC / CAN / RS232 / LoRa / sensor, etc. - Onboard USB Type-C port for power supply, firmware downloading and debugging - Onboard power supply screw terminal, supports 7~36V wide voltage input, suitable for industrial applications - Onboard optocoupler isolation to prevent interference from external high-voltage circuit connected to the relay - Onboard digital isolation to prevent interference from external signal - Onboard unibody power supply isolation, providing stable isolated voltage, no extra power supply required for the isolated terminal - Built in buzzer, RGB colorful LED, power supply and RS485 TX/RX indicators for monitoring the operating status of the module - Rail-mounted ABS case, easy to install, safe to use


Package Includes:

1 × ESP32-S3-Relay-6CH Module




Product Safety Information

Quick specs

Microcontroller
ESP32-S3 (Default module: ESP32-S3-WROOM-1U-N16, customizable for other modules)
Wireless communicatoin
2.4GHz WiFi (802.11 b/g/n)、Bluetooth 5, BLE
USB
Connector
Power supply
5V
Functions
Power supply, USB communication, firmware downloading, etc.
ISOLATED RS485
Connector
See all specifications