Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact ESP8266 ESP-01/ESP-01S carrier board with an integrated DHT11 sensor for WiFi temperature and humidity monitoring. It accepts 3.7V-12V DC power and is intended for smart home and IoT sensing nodes, with the wireless module sold separately.

Key Highlights

  • Integrated DHT11 sensor for temperature and humidity readings
  • Socket accepts ESP8266 ESP-01 or ESP-01S modules
  • Wide 3.7V-12V DC input, including 3.7V lithium cells
  • Compact PC plastic board for tight enclosures
  • Exposed GPIO pins for added customisation
  • Suited to smart home and IoT data logging nodes

Ideal For

  • Makers building DIY smart home sensor nodes
  • Students learning ESP8266 and IoT basics
  • Hobbyists who already own an ESP-01 or ESP-01S module
  • Developers prototyping WiFi temperature and humidity logging
  • Workshops teaching sensor data collection

Buying Tip

Confirm you already own or can source an ESP-01 or ESP-01S module and are comfortable flashing firmware, since neither the module nor a preloaded program is included.

Elecvora expert review

Our verdict

A tidy, low-cost carrier that saves wiring time by combining a DHT11 with an ESP-01 socket. It is a sensible pick for experienced makers, but beginners should expect a learning curve around flashing and power wiring.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • DHT11 sensor and ESP-01 socket on one board
  • Flexible 3.7V-12V DC power input
  • Compact and lightweight for small enclosures
  • GPIO pins exposed for extra customisation

Cons

  • Wireless module not included
  • Requires user-supplied firmware and flashing
  • No preloaded program or app provided

Best for

Makers building a small WiFi temperature and humidity node

Not ideal for

Users wanting a plug-and-play sensor with no programming

Specifications

Item TypeESP8266 Based
Model No. / NameSNA118
MaterialPlastic
Plastic TypePC
Usage TypeVehicles & Remote Control Toys
RC Parts and AccessoriesMotor Components
Tool SuppliesCutting
For Vehicle TypeCars
Technical parametersValue 2
Accessory TypeESP8266
Shipping Weight0.004 kg
Shipping Dimensions8 × 6 × 1.5 cm

What's in the box

  • 1 x ESP8266 ESP-01 ESP-01S DHT11 Temperature and Humidity WiFi Node board (wireless module not included)

Frequently Asked Questions

Is the ESP8266 wireless module included?
No. The board is supplied without the ESP-01 or ESP-01S module, so you must provide your own.
What power supply does it need?
It accepts 3.7V to 12V DC, connected to the VCC and GND pins, and a 3.7V lithium battery can be used.
Do I have to program it myself?
Yes. You need to burn the download program to your ESP-01 or ESP-01S module before the node will work.
Which module versions fit the socket?
The 2x4 pin female socket is designed for ESP8266 ESP-01 and ESP-01S modules, inserted in the direction shown by the arrow.
What does the DHT11 sensor measure?
It measures temperature and humidity in the surrounding environment for collection by the ESP8266.
How should I handle the board?
Check module orientation against the arrow before powering up, and avoid incorrect power wiring, which can damage the module.

Overview

This board is a compact environmental sensing platform built around two parts: a DHT11 temperature and humidity sensor and a socket for an ESP8266 ESP-01 or ESP-01S wireless module. Once you fit and program a module, the board can read the surrounding temperature and humidity and send that data over WiFi to a server of your choosing. It is a practical starting point for anyone assembling a small monitoring node for a smart home or IoT project.

Note that the wireless module is not included. You will need to supply your own ESP-01 or ESP-01S and burn the download program to it before use. The board is therefore best suited to users with some familiarity with ESP8266 flashing and basic wiring.

Key Features

  • Integrated DHT11 sensor for temperature and humidity collection
  • 2x4 pin female socket for ESP-01/ESP-01S modules, with an arrow marking the insertion direction
  • Power input range of 3.7V to 12V DC, so a single 3.7V lithium battery can be used
  • VCC and GND broken out on a 2.54mm pin header for the power supply
  • Compact PC plastic construction that fits easily into small enclosures
  • GPIO pins available for additional customisation

Specifications Explained

ESP8266 based: the board is designed around the ESP8266 platform, using an ESP-01 or ESP-01S module as the controller and WiFi link. The module itself is not part of the package.

DHT11 sensor: this is the onboard element that measures temperature and humidity. It is a simple, low-cost sensor well matched to hobby and educational monitoring projects.

Power: the 3.7V-12V DC range gives you flexibility. A 3.7V lithium battery is supported, and the supply connects to the VCC and GND pins on the 2.54mm header.

Physical build: the board is made from PC plastic and ships at roughly 4 grams with dimensions of about 8 x 6 x 1.5 cm, so it is light and easy to mount.

Compatibility and Requirements

The socket is intended for ESP8266 ESP-01 and ESP-01S modules, which must be purchased separately. You will need to flash your own program to the module before the node can operate. A suitable DC power source within the 3.7V-12V range is also required. The insertion direction is marked with an arrow on the socket, so check orientation before powering up.

Typical Uses

  • Room-level temperature and humidity monitoring for home automation
  • Data collection nodes for IoT learning projects
  • Small environmental logging setups that report to a server
  • Classroom and workshop demonstrations of WiFi sensing

What's in the Box

1 x ESP8266 ESP-01 ESP-01S DHT11 Temperature and Humidity WiFi Node board. The wireless module is not included.

Quick specs

Item Type
ESP8266 Based
Model No. / Name
SNA118
Material
Plastic
Plastic Type
PC
Usage Type
Vehicles & Remote Control Toys
RC Parts and Accessories
Motor Components
See all specifications