Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This product is a good fit for makers, students and electronics hobbyists.

Key Highlights

  • Wireless connection

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Overview

The Espressif ESP32-C3 DevKit-RUST-2 Development Board WiFi bluetooth LE IMU SHTC3 Temperature Humidity Sensor Module Type-C is listed in our range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.


Specifications:
Core module: ESP32-C3-MINI-1 with Wi-Fi and Bluetooth Low Energy coexistence; integrates 4 MB SPI flash
User LED: GPIO LED connected to GPIO10
IMU: ICM-42670-P, connected via I2C interface
Temperature & humidity sensor: SHTC3, connected via I2C interface
Boot button: Hold Boot and press Reset to enter Firmware Download mode via the serial port
RGB LED: Addressable RGB LED driven by GPIO2
Battery charging: Built-in charging circuit for single-cell lithium batteries; red LED indicates charging
USB Type-C port: USB‑CDC power supply and communication interface for flashing and debug
Power regulation: 5 V to 3.3 V buck converter
Reset button: Restarts the system
Pin headers: Most available GPIO pins broken out on both sides for external access; breadboard friendly

Features:
1. Based on ESP32-C3-MINI-1 with 4 MB SPI flash and Wi-Fi + Bluetooth LE for connected projects.
2. Onboard ICM-42670‑P IMU and SHTC3 temperature/humidity sensor, both on I2C.
3. Single-cell Li‑ion charging circuit with a red charge-indicator LED.
4. USB Type-C USB‑CDC for board power, firmware flashing, and debugging.
5. Prototyping friendly: pin headers on both sides, user LED on GPIO10, RGB LED on GPIO2, Boot/Reset control.

Package included:
1 x ESP32-C3-DevKit-RUST-2 Development Board



Product Safety Information