
1 / 4 · Click to enlarge
AI Summary
A 12mm panel-mount momentary push button with a green LED ring, 12V-24V rating and IP67 sealing. It gives dashboards and control panels a durable stainless steel switch that only activates while pressed.
Key Highlights
- Momentary action activates only while the button is held down
- Green LED ring improves visibility on dark panels
- 12V to 24V operating voltage suits common vehicle and project supplies
- IP67 protection standard resists dust and water ingress
- Solder-type contacts for a permanent wired connection
- Stainless steel body with rubber ring and hexagon nut for mounting
Ideal For
- Electronics hobbyists building custom control panels
- Vehicle and dashboard accessory installers
- Drone ground station and FPV case builders
- Equipment makers needing a sealed panel button
- Makers wiring press-and-hold reset or test functions
Buying Tip
Confirm your panel hole is 12mm and that your LED supply sits within 12V-24V DC before soldering the switch into your wiring.
Elecvora expert review
Our verdict
A well-finished, compact momentary switch that combines a stainless steel body, green LED ring and IP67 sealing in a 12mm panel format. It is a sensible pick for press-and-hold controls where soldered wiring and a 12V-24V supply are acceptable.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Stainless steel body with a clean panel look
- Green LED ring is easy to see in low light
- IP67 sealing suits exposed and outdoor panels
- Independent LED terminals add wiring flexibility
- Momentary action is ideal for press-and-hold functions
Cons
- Requires soldering, so no plug-and-play wiring
- Momentary only, not a latching on/off switch
- LED needs a 12V-24V DC supply to illuminate
Best for
Builders needing a sealed 12mm momentary button with an illuminated ring
Not ideal for
Users wanting a latching on/off switch or solder-free installation
Specifications
| Manufacturer | FILN |
|---|---|
| Voltage Rating (V) | 12 to 24 |
| Operating Voltage (VDC) | 12V-24 V |
| Max. Operating Current (A) | 2000 |
| Switch Type | Momentary |
| Contact Type | Solder Type |
| Protection Standard | IP67 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x GREEN 12 mm 12V-24 V Momentary Metal Switch
Frequently Asked Questions
What does momentary mean on this switch?
What voltage does the LED ring need?
How is the switch wired?
Is it waterproof?
What size hole does it fit?
What is included with the switch?
Overview
The FILN green 12mm momentary metal push button is a small panel-mount switch built for control panels, dashboards and equipment where a tough, good-looking button is needed. The stainless steel body gives it a clean, premium appearance, while the green LED ring around the push area makes the switch easy to locate and read in low light.
This is a momentary switch, meaning it changes state only while pressure is applied and returns as soon as you release it. That behaviour suits press-and-hold functions rather than latching on/off control.
Key Features
- Momentary operation: press to activate, release to return.
- Green LED ring: clear visual indication around the button face.
- 12V-24V rating: works with common 12V and 24V DC supplies.
- IP67 protection: sealed against dust and water ingress.
- Solder contacts: secure, permanent wiring connections.
- Panel mounting: rubber ring and hexagon nut hold the switch firmly.
Specifications Explained
Voltage rating: the switch is rated for 12V to 24V DC, so it matches typical vehicle, drone ground station and low-voltage project supplies in that range.
Current: the maximum operating current is listed as 2000, and the switch should be wired within its rated capacity. For higher-load devices, use the switch to control a relay rather than the load directly.
Momentary type: the contact is made while pressed and released when pressure is removed. It does not latch, so it is not a substitute for an on/off toggle.
IP67: the front and rear sealing helps keep dust and water out, which is useful on exposed panels and outdoor equipment.
Solder contacts: wires are soldered to the terminals, giving a reliable connection that will not work loose like a push-fit connector.
Compatibility and Requirements
The switch requires a 12mm panel hole and a 12V to 24V DC supply for the LED ring. Wiring is by soldering to the contacts, so a soldering iron and basic wiring tools are needed. The LED has independent terminals, allowing it to be wired separately from the switch contacts.
Typical Uses
Ideal for dashboard and console controls, horn or start buttons, reset and test functions, equipment panels, and custom electronics enclosures where a compact sealed push button is required.
What's in the Box
1 x GREEN 12 mm 12V-24 V Momentary Metal Switch.
Quick specs
- Manufacturer
- FILN
- Voltage Rating (V)
- 12 to 24
- Operating Voltage (VDC)
- 12V-24 V
- Max. Operating Current (A)
- 2000
- Switch Type
- Momentary
- Contact Type
- Solder Type
















