Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A red 16 mm latching metal push button switch rated 12–24 V with IP65 sealing and silver alloy contacts. It stays in position after pressing, making it ideal for maintained on/off control in panels and custom builds.

Key Highlights

  • Latching action keeps the switch in the selected state after release
  • 16 mm mounting diameter with solder-type contacts for panel wiring
  • IP65 protection against dust and water jets
  • 12–24 V rating with up to 2000 A maximum operating current
  • Stainless steel and plastic body with silver alloy contacts
  • Rated for approximately 100,000 mechanical and electrical cycles

Ideal For

  • Makers building custom control panels and dashboards
  • RC and drone hobbyists wiring accessory circuits
  • Electronics enthusiasts designing enclosure controls
  • Automotive and vehicle accessory projects
  • Industrial or workshop equipment builders

Buying Tip

Confirm your panel cutout is 16 mm and that your circuit voltage is within 12–24 V DC before ordering, and use a solder iron suitable for the switch terminals.

Elecvora expert review

Our verdict

A solid choice for a compact latching panel switch with good sealing and a clear tactile response. The 16 mm size and solder terminals make it best suited to custom builds where a maintained on/off control is needed.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Latching action for maintained on/off control
  • IP65 sealed against dust and water
  • Stainless steel and plastic body with silver alloy contacts
  • Long rated life of about 100,000 cycles

Cons

  • Requires soldering for connections
  • Maximum operating current figure should be verified for your load
  • Package contents not specified

Best for

Custom panels and low-voltage DC projects needing a maintained switch

Not ideal for

High-power AC switching or applications requiring momentary action

Specifications

ManufacturerFILN
Voltage Rating (V)12 to 24
Operating Voltage (VDC)12V to 24V
Max. Operating Current (A)2000
Operating Temperature (°C)-20 to 55
Insulation Resistance (MOhm)≥1000
Contact Resistance (ohm)≤50 MΩ
Operation ForceAbout 3-5N
Mech. Electrical Lifecycle≈ 100,000
Mounting Hole Diameter (mm)16
FunctionPush to ON, Push to OFF
Protection StandardIP65
ColorRed
Switch TypeMomentary
Contact TypeSolder Type
Contact MaterialSilver Alloy
Body MaterialStainless Steel and Plastic
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Frequently Asked Questions

What does latching mean on this switch?
Latching means the switch stays in the position you set after you press it. Push once to turn ON and it remains ON; push again to turn OFF.
What voltage does this switch work with?
It is rated for 12 V to 24 V DC operation. Do not exceed the stated voltage range.
Is this switch waterproof?
It has an IP65 protection rating, which means it is sealed against dust and water jets. It is not intended for continuous immersion.
What is included in the box?
Package contents are not specified by the manufacturer. Please check the listing or contact the seller for details.
How do I connect the switch?
The switch has solder-type contacts. You will need to solder your wires to the terminals following your circuit design.
What is the maximum current rating?
The maximum operating current is listed as 2000 A. Always verify against your actual load and use suitable circuit protection.

Overview

The FILN red 16 mm latching metal push button switch is a compact panel-mount control built for electronic and electrical projects. Its latching function means the switch maintains its position after you press it, so it works as a maintained on/off control rather than a momentary action. The 16 mm mounting hole and solder-type contacts make it straightforward to install in custom panels, dashboards, and enclosures. With a stainless steel and plastic body, silver alloy contacts, and IP65 sealing, it is designed to handle everyday use in a range of environments.

Key Features

  • Latching operation: push to ON, push to OFF, with the switch staying in the selected state.
  • 16 mm panel mount: fits a standard 16 mm mounting hole for neat installation.
  • IP65 protection: sealed against dust and water jets for added durability.
  • Silver alloy contacts: provide good electrical conductivity and reliable switching.
  • Wide voltage range: rated for 12 V to 24 V DC operation.
  • Long service life: approximately 100,000 mechanical and electrical cycles.

Specifications Explained

The 12–24 V rating means the switch is suited to low-voltage DC systems commonly found in vehicles, drones, RC models, and custom electronics. The maximum operating current is listed as 2000 A; always confirm this figure against your actual load and use appropriate circuit protection. The operating force of about 3–5 N gives a firm, deliberate press without requiring excessive effort. Insulation resistance of ≥1000 MΩ and contact resistance of ≤50 MΩ indicate good isolation and low-loss connections. The operating temperature range of -20 to 55 °C covers typical indoor and sheltered outdoor use. The switch uses solder-type contacts, so basic soldering skills are needed for installation.

Compatibility and Requirements

This switch requires a 16 mm mounting hole and is intended for 12–24 V DC circuits. It has solder-type terminals, so you will need a soldering iron and suitable wire to connect it. The latching action makes it suitable for maintained on/off control; it is not a momentary switch. Ensure your load does not exceed the stated maximum operating current and observe correct polarity where applicable.

Typical Uses

Use this switch in custom control panels, dashboard projects, RC transmitters, drone ground stations, automotive accessory circuits, and DIY electronics enclosures. Its red colour and metal finish suit applications where a clear, visible control point is useful.

What's in the Box

Package contents are not specified by the manufacturer. Please check the product listing or contact the seller for details on included hardware.

Quick specs

Manufacturer
FILN
Voltage Rating (V)
12 to 24
Operating Voltage (VDC)
12V to 24V
Max. Operating Current (A)
2000
Operating Temperature (°C)
-20 to 55
Insulation Resistance (MOhm)
≥1000
See all specifications