Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The FILN RED 19 mm latching metal switch is a durable panel-mount push button with IP65 protection and silver alloy contacts. Its push-to-ON/push-to-OFF action maintains state without continuous pressure, ideal for 12-24V control systems.

Key Highlights

  • Latching action: push once to turn ON, push again to turn OFF
  • IP65 rated for protection against dust and water splashes
  • 19 mm mounting hole with solder-type contacts for secure wiring
  • Stainless steel and plastic body with silver alloy contacts
  • Operates on 12V to 24V DC, up to 2000 mA current
  • Approximately 100,000 mechanical and electrical cycles

Ideal For

  • Electronics hobbyists building custom control panels
  • Automotive and motorcycle enthusiasts adding accessory switches
  • Industrial automation technicians needing reliable panel controls
  • Drone and RC ground station builders
  • Marine and outdoor equipment installers

Buying Tip

Verify your panel cutout is exactly 19 mm and that your load does not exceed 2A; use a relay for higher currents.

Elecvora expert review

Our verdict

The FILN RED 19 mm latching metal switch offers a solid blend of durability and functionality for low-voltage DC applications. Its IP65 rating and silver alloy contacts make it a reliable choice for panels that may see dust or splashes.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Latching action maintains state without continuous pressure
  • IP65 protection against dust and water splashes
  • Stainless steel body resists corrosion
  • High current capacity up to 2A
  • Long lifecycle of approximately 100,000 operations

Cons

  • Requires soldering for wire connections
  • Not suitable for AC mains voltage
  • Mounting hole size must be exactly 19 mm

Best for

Low-voltage DC control panels in automotive, industrial, and DIY electronics.

Not ideal for

High-current or AC mains applications without a relay.

Specifications

ManufacturerFILN
Voltage Rating (V)12 to 24
Operating Voltage (VDC)12V to 24 V
Max. Operating Current (A)2000
Operating Temperature (°C)-20 to 55
Insulation Resistance (MOhm)≥1000
Contact Resistance (ohm)≤50 MΩ
Operation ForceAbout 3-5N
Mech. Electrical Lifecycle≈ 100,000
Protection StandardIP65
Mounting Hole Diameter (mm)19
FunctionPush to ON, Push to OFF
ColorRed
Switch TypeMomentary
Contact TypeSolder Type
Contact MaterialSilver Alloy
Body MaterialStainless Steel and Plastic
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x RED 19 mm 12V-24 V Latching Metal Switch

Frequently Asked Questions

Is this switch momentary or latching?
It is latching: push once to turn ON, push again to turn OFF. It maintains its state without continuous pressure.
What voltage does this switch require?
It operates on 12V to 24V DC. Do not use it with AC mains voltage.
What is the maximum current rating?
The switch can handle up to 2000 mA (2A). For higher currents, use a relay.
Does it come with wires or connectors?
No, it has solder-type contacts and requires soldering your own wires. Package includes only the switch.
Is it waterproof?
It has an IP65 rating, meaning it is protected against dust and water splashes, but not suitable for immersion.
What is the mounting hole size?
It fits a 19 mm diameter panel cutout.

Overview

The FILN RED 19 mm 12V-24 V Latching Metal Switch is a robust panel-mount push button built for control applications where a maintained state is required. Unlike momentary switches that reset when released, this latching switch stays in its last position—push once to turn ON, push again to turn OFF. Its stainless steel and plastic construction, combined with IP65 protection, makes it suitable for environments where dust and water splashes are a concern. The red finish adds a clear visual cue, and the 19 mm mounting hole fits standard panel cutouts. With silver alloy contacts and a mechanical life of about 100,000 cycles, it is designed for long-term reliability in low-voltage DC systems.

Key Features

  • Latching function: Maintains ON or OFF state without continuous pressure.
  • IP65 protection: Resists dust ingress and water splashes from any direction.
  • Silver alloy contacts: Provide stable electrical conductivity and durability.
  • Wide voltage range: Operates from 12V to 24V DC, compatible with many power systems.
  • High current capacity: Handles up to 2000 mA (2A) for direct control of small loads.
  • Solder-type terminals: Ensure secure, permanent wire connections.
  • Stainless steel and plastic body: Offers corrosion resistance and mechanical strength.

Specifications Explained

Voltage Rating (12-24V DC): This switch is designed for low-voltage DC circuits commonly found in vehicles, drones, and industrial controls. It is not intended for mains AC voltage.

Max. Operating Current (2000 mA): The switch can directly handle loads up to 2 amperes. For higher-current devices, use a relay or contactor.

Operating Temperature (-20°C to 55°C): Suitable for indoor and sheltered outdoor use within this range; avoid extreme heat or freezing conditions beyond these limits.

Insulation Resistance (≥1000 MΩ) and Contact Resistance (≤50 MΩ): These values indicate good electrical isolation and low resistance for reliable signal and power switching.

Operation Force (3-5N): Requires a firm but comfortable press, providing tactile feedback without being too stiff.

Mechanical/Electrical Lifecycle (≈100,000): Expect roughly 100,000 operations before significant wear, under normal use.

Protection Standard (IP65): The switch is protected against dust and low-pressure water jets, making it suitable for washdown areas or outdoor panels when properly installed.

Mounting Hole Diameter (19 mm): Fits a standard 19 mm panel cutout; ensure your panel thickness is compatible with the switch thread (thread length not specified).

Compatibility and Requirements

This switch requires a 19 mm mounting hole and operates on 12V to 24V DC. It has solder-type contacts, so you will need a soldering iron and appropriate wire for installation. The switch is not pre-wired and does not include a connector. It is suitable for low-voltage DC applications only; do not use with AC mains. Ensure your circuit current does not exceed 2000 mA. The IP65 rating is maintained only when the switch is properly mounted and sealed.

Typical Uses

  • Control panels for drones, RC models, and FPV ground stations
  • Automotive dashboards and accessory switches
  • Industrial equipment and machinery control
  • Custom electronics projects and DIY builds
  • Marine and outdoor panels requiring splash resistance

What's in the Box

1 x RED 19 mm 12V-24 V Latching Metal Switch

Quick specs

Manufacturer
FILN
Voltage Rating (V)
12 to 24
Operating Voltage (VDC)
12V to 24 V
Max. Operating Current (A)
2000
Operating Temperature (°C)
-20 to 55
Insulation Resistance (MOhm)
≥1000
See all specifications