
1 / 3 · Click to enlarge
AI Summary
A red FILN KCD4 rocker switch rated 12V–24V at 16A, wired as a 4-pin DPST ON-OFF switch. It clips into a panel cutout without screws and switches two separate circuits together.
Key Highlights
- 4-pin DPST ON-OFF switching for two separate circuits
- 16A current rating with a 12V to 24V maximum voltage range
- Red rocker body in plastic and metal construction
- Tab mounting secures the switch to an enclosure without screws
- ON and OFF markings show switch position during use
- Compact 1 x 1 x 1 cm shipping size, light to post
Ideal For
- Makers building panel-mounted power control for small projects
- Electronics hobbyists wiring ON-OFF control into custom enclosures
- Repair technicians replacing a failed rocker switch
- Builders of small instruments and office equipment
- Anyone needing a 4-pin DPST switch within a 12V–24V range
Buying Tip
Confirm your circuit stays within the 12V–24V maximum voltage range and 16A rating, and check that your enclosure cutout and four-terminal wiring suit a DPST switch before ordering.
Elecvora expert review
Our verdict
The FILN KCD4 is a practical choice when you need a compact, screw-free rocker switch that can open and close two separate circuits at once. Its 12V–24V range and 16A rating cover many small power projects, provided you stay inside those limits.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Two independent pole pairs switch together in one action
- Tool-free tab mounting simplifies panel installation
- Clear ON and OFF markings
- Light and compact for easy shipping and storage
Cons
- Voltage range is limited to a 12V–24V maximum
- Design of the actual switch may vary from the reference image
- Requires a suitable enclosure cutout and wiring work
Best for
Small power projects and equipment needing a 4-pin DPST ON-OFF panel switch
Not ideal for
Circuits above the stated 12V–24V range or 16A current rating
Specifications
| Manufacturer | FILN |
|---|---|
| Model No. / Name | KCD4 |
| Max Voltage (V) | 12 V to 24 V |
| Current | 16 |
| No. of Pins | 4 |
| Color | Red |
| Switch Type | Rocker switch |
| Material | Plastic and metal |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x FILN KCD4 Red 12V–24V 16A DPST ON-OFF 4 Pin Rocker Switch
Frequently Asked Questions
What does DPST mean on this switch?
What voltage and current can it handle?
Do I need screws to mount it?
Are the two circuits connected to each other?
What is included in the package?
How should I look after the switch?
Overview
The FILN KCD4 is a red rocker switch designed for panel-mounted power control. It is rated for a maximum voltage range of 12V to 24V and a current of 16A, and it uses four pins in a double pole single throw (DPST) arrangement. In practice that means two separate terminal pairs switch together: both circuits are either connected or disconnected at the same time, and the pairs are never linked to each other.
The switch body combines plastic and metal parts and mounts through an enclosure cutout. Tabs on the top and bottom hold it in place, so no screws are required. ON and OFF markings on the rocker make the current position easy to read.
Key Features
- DPST ON-OFF action: four terminals arranged as two independent pairs that switch together.
- 16A rating: intended for higher-current control than a typical small signal switch.
- 12V to 24V maximum voltage range: suits low-voltage DC projects and equipment within that range.
- Tool-free mounting: retaining tabs secure the switch onto an enclosure.
- Clear position markings: ON and OFF labels help you confirm the switch state.
- Compact and light: shipping weight is 0.001 kg and shipping dimensions are 1 x 1 x 1 cm.
Specifications Explained
Voltage and current
The 12V to 24V figure is the maximum voltage range stated for this switch, and 16A is its current rating. Match your circuit to these limits rather than exceeding them.
Four pins, DPST
Four terminals mean two pole pairs. Each pair connects one source terminal to its output terminal when the switch is ON. Because the pairs are separate, you can switch two circuits at once, but the two circuits are not joined together.
Mounting
The top and bottom tabs press against the enclosure to hold the switch in a cutout. This keeps installation simple and avoids screw holes.
Compatibility and Requirements
This switch is intended for circuits within its 12V to 24V maximum voltage range and up to its 16A current rating. It is a panel-mount component, so you need a suitable enclosure cutout and wiring to the four terminals. No additional parts are listed beyond the switch itself.
Typical Uses
The KCD4 format is commonly used to control the operation of small power electronic projects, instruments, home appliances and office equipment. Hobbyists and repairers also use it as a general ON-OFF power control in custom builds.
What's in the Box
One FILN KCD4 red 12V–24V 16A DPST ON-OFF 4-pin rocker switch. Note that the actual switch may vary in design.

Quick specs
- Manufacturer
- FILN
- Model No. / Name
- KCD4
- Max Voltage (V)
- 12 V to 24 V
- Current
- 16
- No. of Pins
- 4
- Color
- Red
















