
1 / 5 · Click to enlarge
AI Summary
A 12 mm panel-mount latching metal switch rated 12-24V with IP65 protection and a stainless steel body. It offers push-to-on, push-to-off operation for control panels and equipment.
Key Highlights
- Latching action: push once to turn on, push again to turn off
- 12 mm mounting hole with compact metal body
- Rated for 12V to 24V DC operation
- IP65 protection against dust and water jets
- Stainless steel and plastic construction
- Approximately 100,000 mechanical and electrical cycles
Ideal For
- Electronics hobbyists building custom control panels
- Technicians repairing or upgrading equipment
- Automotive and marine DIY enthusiasts
- Industrial panel builders
- Makers creating interactive installations
Buying Tip
Check that your panel has a 12 mm mounting hole and that your circuit voltage is within 12-24V DC before purchasing.
Elecvora expert review
Our verdict
The FILN Yellow 12 mm Latching Metal Push Button Switch is a solid choice for low-voltage panel-mount applications where a durable, tactile latching switch is needed. Its stainless steel body and IP65 rating add to its appeal, though the solder-type terminals and compact size require careful installation.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Latching action for maintained on/off states
- IP65 protection against dust and water jets
- Stainless steel body for durability
- Compact 12 mm mounting hole
- Long mechanical life of approximately 100,000 cycles
Cons
- Solder-type terminals require soldering skills
- Not suitable for mains AC voltages
- Maximum current rating should be verified for specific loads
Best for
Low-voltage DC control panels and equipment
Not ideal for
High-power or mains voltage switching
Specifications
| Manufacturer | FILN |
|---|---|
| Voltage Rating (V) | 12 to 24 |
| Operating Voltage (VDC) | 12V to 24V |
| Max. Operating Current (A) | 2000 |
| Operating Temperature (°C) | -20 to 55 |
| Insulation Resistance (MOhm) | ≥1000 |
| Mech. Electrical Lifecycle | ≈ 100,000 |
| Contact Resistance (ohm) | ≤50 MΩ |
| Operation Force | About 3-5N |
| Function | Push to ON, Push to OFF |
| Mounting Hole Diameter (mm) | 12 |
| Protection Standard | IP65 |
| Color | Yellow |
| Switch Type | Momentary |
| Contact Type | Solder Type |
| Contact Material | Silver Alloy |
| Body Material | Stainless Steel and Plastic |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x YELLOW 12 mm 12V-24V LATCHING Metal Switch
Frequently Asked Questions
What does latching mean on this switch?
What voltage can this switch handle?
Is this switch waterproof?
How do I connect wires to this switch?
What is included in the package?
What is the mounting hole size?
Overview
The FILN Yellow 12 mm Latching Metal Push Button Switch is a panel-mount switch that provides a secure push-to-on, push-to-off function. Unlike momentary switches, it maintains its position after each press, making it suitable for applications where a continuous state change is required. The switch features a 12 mm mounting hole, a stainless steel and plastic body, and a yellow finish for easy identification on a panel. With an IP65 protection rating, it is designed to resist dust ingress and water jets, supporting use in varied environments.
Key Features
- Latching operation: Push to turn on, push again to turn off; the switch stays in the selected state.
- 12 mm panel mount: Fits a standard 12 mm mounting hole for straightforward installation.
- 12V-24V rating: Suitable for low-voltage DC systems within this range.
- IP65 protection: Offers resistance to dust and water jets for added durability.
- Stainless steel and plastic body: Combines strength with a clean, professional appearance.
- Silver alloy contacts: Solder-type terminals for secure electrical connections.
- Long service life: Approximately 100,000 mechanical and electrical cycles.
Specifications Explained
Voltage rating (12V to 24V DC): This switch is intended for low-voltage DC circuits within this range. It is not suitable for mains AC voltages. Maximum operating current (2000 A): This figure is listed in the product data; however, buyers should verify suitability for their specific load, as the switch is compact and the contact rating may be lower in practice. Operating temperature (-20°C to 55°C): The switch can operate in typical indoor and sheltered outdoor environments within this range. Insulation resistance (≥1000 MΩ): Indicates good electrical isolation between conductive parts. Contact resistance (≤50 MΩ): A low resistance value helps minimise voltage drop across the contacts. Operation force (about 3-5N): Provides a light, tactile feel without requiring excessive pressure. Mechanical and electrical life (≈100,000 cycles): Supports repeated actuation over the product's lifespan. Mounting hole diameter (12 mm): Ensure your panel or enclosure has a compatible 12 mm hole. Protection standard (IP65): The switch is protected against dust and water jets from any direction, but it is not intended for submersion. Contact type (solder type): Wiring requires soldering to the terminals. Contact material (silver alloy): A common material for reliable low-power switching. Body material (stainless steel and plastic): Offers a balance of mechanical strength and electrical insulation.
Compatibility and Requirements
This switch is designed for panel mounting with a 12 mm hole. It requires soldering for electrical connections. The operating voltage must be within 12V to 24V DC. The switch is not supplied with a wiring harness or connector; installation requires appropriate wire and soldering tools. Ensure the panel thickness and mounting method are suitable for the switch's body dimensions (shipping dimensions are 1 × 1 × 1 cm, indicating a compact size).
Typical Uses
- Control panels and dashboards
- DIY electronics and maker projects
- Equipment power switching
- Automotive and marine auxiliary circuits (within voltage range)
- Industrial control boxes
- Custom enclosures and prototypes
What's in the Box
1 x YELLOW 12 mm 12V-24V LATCHING Metal Switch
Quick specs
- Manufacturer
- FILN
- Voltage Rating (V)
- 12 to 24
- Operating Voltage (VDC)
- 12V to 24V
- Max. Operating Current (A)
- 2000
- Operating Temperature (°C)
- -20 to 55
- Insulation Resistance (MOhm)
- ≥1000
















