
1 / 7 · Click to enlarge
AI Summary
A 16 mm panel-mount latching push button switch with a yellow finish, rated 220 V and IP65 for dust and water resistance. It stays ON or OFF after each press, ideal for control panels and DIY projects.
Key Highlights
- Latching function: push once for ON, again for OFF
- 16 mm mounting hole with solder-type contacts
- IP65 rated for dust and water resistance
- Stainless steel and plastic body for durability
- Silver alloy contacts for reliable conductivity
- Approximately 100,000 mechanical and electrical cycles
Ideal For
- Industrial control panel builders
- Automotive and dashboard customizers
- DIY electronics hobbyists
- Equipment technicians needing a sealed switch
- Makers designing weather-resistant enclosures
Buying Tip
Confirm that your panel cutout is exactly 16 mm and that your circuit voltage and current are within the switch ratings before ordering.
Elecvora expert review
Our verdict
A solid, weather-resistant latching switch that is easy to mount and offers a long mechanical life. The 16 mm size and IP65 rating make it a practical choice for many panel applications, though the current rating should be verified.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Latching action simplifies ON/OFF control
- IP65 sealing for dusty or wet environments
- Durable stainless steel and plastic body
- Long lifecycle of about 100,000 operations
Cons
- Current rating of 2000 A appears unusually high and should be confirmed
- Requires soldering for connections
- No package contents or accessories specified
Best for
Panel builders needing a sealed, latching push button for 220 V circuits
Not ideal for
Low-voltage signal switching without verifying contact ratings
Specifications
| Manufacturer | FILN |
|---|---|
| Voltage Rating (V) | 220 |
| Operating Voltage (VDC) | 220V |
| Max. Operating Current (A) | 2000 |
| Operating Temperature (°C) | -20 to 55 |
| Insulation Resistance (MOhm) | ≥1000 |
| Contact Resistance (ohm) | ≤50 MΩ |
| Operation Force | About 3-5N |
| Mech. Electrical Lifecycle | ≈ 100,000 |
| Mounting Hole Diameter (mm) | 16 |
| Function | Push to ON, Push to OFF |
| Protection Standard | IP65 |
| Color | Yellow |
| Switch Type | Momentary |
| Contact Type | Solder Type |
| Contact Material | Silver Alloy |
| Body Material | Stainless Steel and Plastic |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
Frequently Asked Questions
Is this switch latching or momentary?
What is the mounting hole size?
What is the maximum voltage and current?
Is the switch waterproof?
What is included in the package?
How do I connect the switch?
Overview
The FILN Yellow 16 mm 220 V Latching Metal Switch is a panel-mount push button built for dependable ON/OFF control. Unlike a momentary switch, this latching model keeps its position after each press, so you do not need to hold it down. The stainless steel and plastic body provides a robust feel, while the yellow color makes the switch easy to spot on a crowded panel. With IP65 protection, it is sealed against dust and water jets, making it suitable for environments where exposure to contaminants is a concern.
Key Features
- Latching operation: Push to turn ON, push again to turn OFF; the switch maintains its state.
- 16 mm mounting: Fits a standard 16 mm panel hole for a clean, secure installation.
- IP65 protection: Front and rear sealing helps keep out dust and water.
- Silver alloy contacts: Provide good electrical conductivity for reliable switching.
- Long service life: Mechanical and electrical lifecycle of approximately 100,000 operations.
- Solder-type terminals: Allow permanent wired connections.
Specifications Explained
The 220 V voltage rating and 2000 A maximum operating current (likely a data sheet anomaly; verify with the manufacturer) indicate the switch is intended for higher-power circuits, but always confirm the actual load with FILN documentation. The insulation resistance of ≥1000 MΩ and contact resistance of ≤50 mΩ help ensure minimal power loss and safe operation. An operating force of about 3–5 N gives a positive tactile response without requiring excessive pressure. The operating temperature range of -20 to 55 °C covers typical indoor and sheltered outdoor applications.
Compatibility and Requirements
This switch requires a 16 mm mounting hole and solder connections. It is designed for 220 V circuits; ensure your wiring and load are compatible with the switch ratings. No additional components are included, so you will need appropriate wire, solder, and tools for installation.
Typical Uses
Common applications include industrial control panels, automotive dashboards, DIY electronics projects, and equipment where a durable, weather-resistant ON/OFF switch is needed. The yellow color can serve as a visual indicator for a specific function.
What's in the Box
Package contents are not specified by the manufacturer. Please check the product packaging or contact the seller for details.
Quick specs
- Manufacturer
- FILN
- Voltage Rating (V)
- 220
- Operating Voltage (VDC)
- 220V
- Max. Operating Current (A)
- 2000
- Operating Temperature (°C)
- -20 to 55
- Insulation Resistance (MOhm)
- ≥1000















