Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact FlySky 2.4GHz six-channel receiver with PPM output, an i-Bus port and dual antennas for stable reception. Its end-on connectors and 14.9 g weight make it easy to fit into tight airframes.

Key Highlights

  • Six-channel 2.4GHz receiver with PPM output and i-Bus port
  • Dual antennas improve reception and interference rejection
  • Wide 4.0 to 8.4 VDC operating voltage range
  • GFSK modulation across 140 bands with -105 dBm sensitivity
  • Compact 47 x 26.2 x 15 mm body weighing just 14.9 g
  • End-on connectors for neat installation in tight spaces

Ideal For

  • Fixed-wing pilots building trainers and sport planes
  • Glider and sailplane hobbyists needing a compact receiver
  • Helicopter builders using up to six channels
  • Multirotor builders who prefer PPM or i-Bus connections
  • Hobbyists upgrading a FlySky transmitter setup

Buying Tip

Check that your transmitter is one of the listed FlySky models and that your build's power supply stays within 4.0 to 8.4 VDC before wiring the receiver.

Elecvora expert review

Our verdict

The FS-iA6B is a sensible choice for FlySky users who want six channels, PPM and i-Bus in a small, light package. Dual antennas and a wide voltage window make it easy to live with in everyday sport and multirotor builds.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • PPM and i-Bus output in one compact receiver
  • Dual antennas support reception and interference rejection
  • Light 14.9 g body with end-on connectors
  • Wide 4.0 to 8.4 VDC operating range
  • Works with several FlySky transmitter models

Cons

  • Telemetry requires optional FlySky sensors
  • No dimensions or weight data for the antennas beyond 26 mm length
  • Limited to six channels, so complex models may need more

Best for

FlySky pilots flying sport planes, gliders, helicopters and simple multirotors

Not ideal for

Pilots who need more than six channels or a receiver outside the FlySky ecosystem

Specifications

Item TypeReceiver
No. of Channels6
Frequency (GHz)2.4
Operating Voltage (VDC)4.0 ~ 8.4V
No. of Bands140
Modulation TypeGFSK
RF Range2.4055--2.475 GHz.
Sensitivity (dBm)-105
i-Bus InterfaceYes
Antenna Length (mm)26
Video Format SupportedNTSC/PAL
ColorBlack
UPC705554239905
Dimensions (L x W x H) mm47 x 26.2 x 15
Weight (g)14.9
Shipping Weight0.03 kg
Shipping Dimensions5 × 3 × 1 cm

What's in the box

  • 1 x FlySky FS-iA6B 2.4GHz 6-channel receiver
  • 1 x Bind plug

Frequently Asked Questions

Which transmitters work with the FS-iA6B?
It is compatible with FlySky transmitters including the FS-i4, FS-i6, FS-i10, FS-GT2E and FS-GT2G.
What voltage does the receiver need?
The FS-iA6B operates from 4.0 to 8.4 VDC, so confirm your model's supply falls within that range.
Does it support telemetry?
Yes, the built-in i-Bus interface allows use of optional FlySky telemetry sensors.
What is included with the receiver?
The package contains one FS-iA6B receiver and one bind plug.
Can I use it with a flight controller?
Yes, PPM output and the i-Bus port give you single-wire connection options for compatible flight controllers.
How should I care for the receiver?
Keep it dry, protect the antennas from damage and avoid mounting it where vibration or heat could affect it.

Overview

The FlySky FS-iA6B is a 2.4GHz six-channel receiver designed for models that need a dependable control link without adding bulk. At 47 x 26.2 x 15 mm and only 14.9 g, it fits comfortably into narrow fuselages and compact multirotor frames. PPM output and a dedicated i-Bus port give you flexible ways to connect a flight controller or servos, while dual antennas help maintain reception in busy radio environments.

Key Features

  • Six channels for ailerons, elevator, rudder, throttle and auxiliary functions.
  • PPM output plus i-Bus port for single-wire connection to compatible flight controllers and devices.
  • Dual antennas to support reception quality and interference rejection.
  • End-on connectors that keep wiring low-profile inside tight builds.
  • GFSK modulation across 140 bands in the 2.4055 to 2.475 GHz range.

Specifications Explained

The 4.0 to 8.4 VDC operating range lets the receiver run from common model power setups within that window. Sensitivity of -105 dBm indicates how weak a signal the receiver can still work with, which matters at the edges of your flying area. The 26 mm antennas are short enough to route internally, and the second-generation automatic FM digital system supports stable frequency handling. A transmitting power of up to 20 dBm keeps the link within the intended 2.4GHz band.

Compatibility and Requirements

The FS-iA6B is compatible with FlySky transmitters including the FS-i4, FS-i6, FS-i10, FS-GT2E and FS-GT2G. It suits airplane, glider and helicopter model types, and the i-Bus interface allows use of optional FlySky telemetry sensors. You will need a compatible transmitter and a power source within the stated voltage range to operate it.

Typical Uses

Use it in fixed-wing trainers, gliders, sport planes, helicopters and multirotor builds that need up to six channels. The compact footprint and end-on connectors are especially helpful where space is limited and wiring needs to stay tidy.

What's in the Box

  • 1 x FlySky FS-iA6B 2.4GHz 6-channel receiver
  • 1 x Bind plug

Quick specs

Item Type
Receiver
No. of Channels
6
Frequency (GHz)
2.4
Operating Voltage (VDC)
4.0 ~ 8.4V
No. of Bands
140
Modulation Type
GFSK
See all specifications