Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Geekcreit, this electronics is a good fit for makers, students and electronics hobbyists. Main specs: module model ESP32-CAM; package DIP-16; size 27*40.5*4.5(±0.2)mm.

Key Highlights

  • Wireless connection
  • Module model: ESP32-CAM
  • Package: DIP-16
  • Size: 27*40.5*4.5(±0.2)mm

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Module modelESP32-CAM
PackageDIP-16
Size27*40.5*4.5(±0.2)mm
SPI Flashdefault 32Mbit
RAMinternal520KB+external 4M PSRAM
bluetoothbluetooth4.2BR/EDR and BLE standards
Wi-Fi802.11 b/g/n/e/i
Support interfaceUART, SPI, I2C, PWM
Support TF cardMaximum support 4G
IO port9
Serial port ratedefault 115200 bps
Image output formatJPEG (only supported by OV2640), BMP, GRAYSCALE
Spectrum range2412 ~ 2484MHz
Antenna formonboard PCB antenna , gain 2dBi
Transmit power802.11b: 17±2 dBm (@11Mbps)802.11g: 14±2 dBm (@54Mbps)802.11n: 13±2 dBm (@MCS7)
Receiving sensitivityCCK, 1 Mbps : -90dBmCCK, 11 Mbps: -85dBm6 Mbps (1/2 BPSK): -88dBm54 Mbps (3/4 64-QAM): -70dBmMCS7 (65 Mbps, 72.2 Mbps): -67dBm
Power consumptionTurn off the flash: 180mA@5V
SecurityWPA/WPA2/WPA2-Enterprise/WPS
Power supply range5V
Operating temperature-20 °C ~ 85 °C
Storage environment-40 °C ~ 90 °C, < 90%RH

Overview

The Geekcreit ESP32-CAM WiFi + bluetooth Camera Module Development Board ESP32 With Camera Module OV2640, made by Geekcreit, is listed in our electronics range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Module model: ESP32-CAM
  • Size: 27*40.5*4.5(±0.2)mm (measure your mounting space before ordering)
  • SPI Flash: default 32Mbit (space for firmware, files or media)
  • RAM: internal520KB+external 4M PSRAM (more memory leaves room for larger programs and buffers)
  • bluetooth: bluetooth4.2BR/EDR and BLE standards (check your phone or controller supports the same Bluetooth version for full range)
  • Wi-Fi: 802.11 b/g/n/e/i (2.4 GHz reaches further, 5 GHz is faster at short range)
  • Support interface: UART, SPI, I2C, PWM (confirm your cable or board uses the same connector)
  • Support TF card: Maximum support 4G (confirm your cable or board uses the same connector)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

For more files, please click here: 

Description:
 
1. ESP32-CAM is a WIFI+ bluetooth dual-mode development board that uses PCB on-board antennas and cores based on ESP32 chips. It can work independently as a minimum system.
2. ESP integrates WiFi, traditional bluetooth and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture, main frequency adjustment range 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc.
3. Fully compliant with WiFi 802.11b/g/n/e/i and bluetooth 4.2 standards, it can be used as a master mode to build an independent network controller, or as a slave to other host MCUs to add networking capabilities to existing devices.
4. ESP32-CAM can be widely used in various IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is an ideal solution for IoT applications. 

Features:
 
- Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
- Low-power dual-core 32-bit CPU for application processors
- Up to 240MHz, up to 600 DMIPS
- Built-in 520 KB SRAM, external 4M PSRAM
- Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
- Support OV2640 and OV7670 cameras with built-in flash
- Support for images WiFI upload
- Support TF card
- Support multiple sleep modes
- Embedded Lwip and FreeRTOS
- Support STA/AP/STA+AP working mode
- Support Smart Config/AirKiss One-click distribution network
- Support for serial local upgrade and remote firmware upgrade (FOTA)
- Support secondary development
 
Note:
 
This product contains the OV2640 Camera Module. If you need to use the OV7670 camera, please purchase it separately.
 
Package Included:
 
1 x ESP32-CAM Module
1 x Camera Module OV2640 2MP

Product Specifications:


ESP32-CAM Picture Output Format Rate:
Test environment: camera model: OV2640 XCLK: 20MHz, the module transmits pictures to the computer browser by WiFi.

Package includes:

1 x Camera Module


Product Safety Information

Quick specs

Module model
ESP32-CAM
Size
27*40.5*4.5(±0.2)mm
SPI Flash
default 32Mbit
RAM
internal520KB+external 4M PSRAM
bluetooth
bluetooth4.2BR/EDR and BLE standards
Wi-Fi
802.11 b/g/n/e/i
See all specifications

More from Geekcreit

View all →

Related Products

View all →