Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Geekcreit, this power supply module is a good fit for makers, students and electronics hobbyists. Main specs: output DC voltage; rated current 33.3A; rated power 399.6W. Check that your power source supplies ±1% before connecting it.

Key Highlights

  • Output: DC voltage
  • Rated current: 33.3A
  • Rated power: 399.6W

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ItemTechnical Specifications
OutputDC voltage
Rated current33.3A
Rated power399.6W
Ripple and noise ①<150mV
Voltage accuracy±1%
Output voltage adjustment range±10%
Load Regulation<±1.2%
Linear adjustment rate<±1%
InputVoltage range
Efficiency (typical) ②>82%
Working current<5.2A 115VAC, <2.8A 230VAC
Electric shock110VAC: 25A, 220VAC: 50A
Start, rise, hold time200ms, 50ms, 20ms: 230VAC
ProtectionOverload protection
Overvoltage protectionTurn off output when >=115%-145%
Undervoltage protectionTurn off output when <10%-45%
Short circuit protectionClose output
EnvironmentWorking temperature, humidity
Storage temperature, humidity-20°C ~+85°C, 10%~95%RH
SafetyWithstand voltage
Leakage currentInput-output <6mA at 1.5KVAC
Leakage currentInput-output <1.5mA at 220VAC
Isolation resistanceInput-output, input-housing, output-housing: 500VDC/100MΩ
OtherSize
Net reset / gross reset874.1/936.3g

Overview

The RD6006/RD6006-W LED Switching Power Supply S-400W-48V/DC12V/24V/36V/60V 8.3A-33.3A Support Monitoring Transformer Lighting, made by Geekcreit, is listed in our power supply module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item: Technical Specifications
  • Output: DC voltage (match this to your power supply; too high a voltage can damage the part)
  • Rated current: 33.3A (your supply must deliver at least this much current)
  • Rated power: 399.6W
  • Ripple and noise ①: <150mV
  • Voltage accuracy: ±1% (match this to your power supply; too high a voltage can damage the part)
  • Output voltage adjustment range: ±10% (quoted range is usually line-of-sight; walls and interference shorten it)
  • Load Regulation: <±1.2%

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Feature:

,  (If you need to use with RD6006/RD6006-W, please select 60V)
Model: S-400-xx
Output power: 400W
Output voltage: DC12/24/36/48/60V (Optional)
Input voltage: 110V/220V AC
Ambient temperature: -10 ° C ~ +50 ° C
Adjustable voltage: ±10%
Product size: 215 x 115 x 50mm

 
①Ripple and noise measurement method: Use a 12mm twisted pair cable, and the terminal should be connected with 0.1uF and 47uF capacitors in parallel and measure at 20MHz bandwidth.
②Efficiency is tested at an input voltage of 230VAC, rated load, and ambient temperature of 25°C.
Accuracy: Includes setting error, linear adjustment rate and load adjustment rate
Linear Rate Test Method: Test from low voltage to high voltage at rated load.
Load regulation test method: from 0% to 100% of rated load.
The startup time is measured in the cold start state. The fast and frequent switching machine may increase the startup time. When the operating altitude is higher than 2000M, the operating environment temperature should be reduced by 5°C/1000M.
Package includes:
1 x Power Supply

Note: Due to logistics reasons, the following problems may occur after you receive the goods (just like the picture), you can use your hand to adjust, that's ok, if you mind this, please stop buying. 
RD6006/RD6006-W LED Switching Power Supply S-400W-48V/DC12V/24V/36V/60V 8.3A-33.3A Support Monitoring Transformer Lighting



Product Safety Information

Quick specs

Item
Technical Specifications
Output
DC voltage
Rated current
33.3A
Rated power
399.6W
Ripple and noise ①
<150mV
Voltage accuracy
±1%
See all specifications

More from Geekcreit

View all →

Related Products

View all →