
1 / 3 · Click to enlarge
AI Summary
A three-piece aluminum heat sink set shaped for the Raspberry Pi 4B, supplied with thermal tape for simple passive cooling. The lightweight green sinks add extra heat dissipation without fans, power or wiring.
Key Highlights
- Three-piece aluminum alloy heat sink set for the Raspberry Pi 4B
- Pre-applied thermal tape helps transfer heat to the metal sinks
- Contoured to follow the Pi 4B board layout
- Green anodized-look finish for a coordinated build
- Weighs only 4 g, adding minimal bulk to the board
- Passive design needs no fan, power or extra wiring
Ideal For
- Raspberry Pi 4B owners adding passive cooling
- Makers building compact Pi 4B projects
- Students learning about single-board computers
- Hobbyists building media centres or home servers
- Builders who prefer fanless, silent setups
Buying Tip
Before fitting the sinks, check the clearance inside your Pi 4B case so the added height does not press against the lid.
Elecvora expert review
Our verdict
A low-cost, fanless cooling accessory that is easy to fit and adds almost no weight to a Pi 4B build. It suits anyone who wants a tidy passive upgrade rather than a powered cooling solution.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Simple passive design with no wiring
- Pre-applied thermal tape for quick fitting
- Lightweight at around 4 g
- Green finish suits custom builds
Cons
- Cooling performance is limited compared with active fan cooling
- Adhesive tape is not described as reusable
Best for
Fanless Raspberry Pi 4B builds and light everyday projects
Not ideal for
Heavy sustained workloads that need active cooling
Specifications
| Compatibility | Pi 4B |
|---|---|
| Color | Green |
| Weight (g) | 4 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 6 × 9 × 1 cm |
What's in the box
- 1 x Green 3 in 1 Heat Sink Set Aluminum for Raspberry Pi 4B
Frequently Asked Questions
Which board is this heat sink set for?
Does it need power or a fan?
How do the sinks attach?
How much does the set weigh?
What is included in the package?
Will it fit inside my case?
Overview
The Green 3 in 1 Heat Sink Set is a simple passive cooling accessory for the Raspberry Pi 4B. It contains three aluminum alloy heat sinks shaped to follow the contours of the board, so they sit over the components that generate the most heat. Each sink is supplied with thermal tape, which helps conduct heat from the integrated circuit into the aluminum body and then into the surrounding air.
Because the set is passive, there is no fan to power, no cable to route and no extra noise. It is a practical first cooling upgrade for anyone running a Pi 4B in a case or on an open desk.
Key Features
- Aluminum alloy construction: the sinks are made of aluminum, a material chosen for heat transfer, and the finish resists rust.
- Thermal tape included: each sink has adhesive thermal tape that helps move heat efficiently from the chip to the sink.
- Pi 4B-specific contours: the shapes are adapted to the standard Raspberry Pi 4B layout.
- Green finish: a coordinated colour that suits custom builds and cases.
- Very light: the set weighs around 4 g, so it barely affects the board.
Specifications Explained
Compatibility: the set is intended for the Raspberry Pi 4B. The contours are matched to that board, so the sinks sit where they are meant to.
Material and colour: aluminum alloy gives good heat conduction in a low-profile form, while the green finish is a cosmetic choice for builders who want a tidy look.
Weight: at roughly 4 g for the set, the sinks add negligible load to the board and are unlikely to affect mounting in most cases.
Shipping dimensions: the pack ships in a small 6 x 9 x 1 cm format, which reflects the compact size of the three sinks.
Compatibility and Requirements
This set is designed for the Raspberry Pi 4B. It is a passive accessory, so it needs no power connection and no software. Fit the sinks to the appropriate chips using the supplied thermal tape. If you use a case, check that there is enough clearance above the board before fitting the sinks.
Typical Uses
Use the set on a Pi 4B running a media centre, a home automation server, a learning project or a light development setup. It is also useful for open-board builds where you want a little extra thermal headroom without adding a fan.
What's in the Box
The package includes one Green 3 in 1 Heat Sink Set Aluminum for Raspberry Pi 4B.
Quick specs
- Compatibility
- Pi 4B
- Color
- Green
- Weight (g)
- 4
- Shipping Weight
- 0.005 kg
- Shipping Dimensions
- 6 × 9 × 1 cm













