Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The GY-NEO6MV2 is a compact GPS module featuring the u-blox NEO-6M receiver, ceramic antenna, and EEPROM for configuration storage. It provides accurate NMEA positioning data over TTL serial, making it ideal for Arduino, Raspberry Pi, and flight control projects.

Key Highlights

  • u-blox NEO-6M receiver for reliable positioning
  • Built-in ceramic antenna plus support for external active antenna
  • 24C32 EEPROM stores configuration data
  • TTL serial interface with NMEA 0183 protocol
  • Wide 3.3V to 5V input voltage range
  • Compact 35 x 24 mm board weighs just 4 grams

Ideal For

  • Arduino and Raspberry Pi hobbyists adding GPS capability
  • Drone and RC plane builders using APM flight controllers
  • Robotics enthusiasts needing real-time positioning
  • Developers creating custom GPS trackers
  • Students learning about GPS and serial communication

Buying Tip

Check that your flight controller or microcontroller has a free serial port and that you have a clear view of the sky for best GPS reception.

Elecvora expert review

Our verdict

The GY-NEO6MV2 is a solid, no-frills GPS module that delivers dependable NMEA data for hobbyist projects. Its compact size, wide voltage range, and EEPROM make it a convenient choice for adding GPS to drones, robots, and microcontroller setups.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Easy integration with common microcontrollers and flight controllers
  • Built-in ceramic antenna and external antenna support
  • EEPROM retains configuration settings
  • Wide 3.3V to 5V input voltage range
  • Very small and lightweight

Cons

  • Requires a clear sky view for reliable fix
  • No built-in level shifting for 5V logic (check your board)
  • External antenna not included beyond the basic antenna

Best for

Hobbyists and developers needing an affordable GPS module for Arduino, Raspberry Pi, or APM-based projects.

Not ideal for

Applications requiring high-precision surveying or use in environments with obstructed sky view without an external antenna.

Specifications

Item TypeGPS Module
Input Voltage (V)3.3 to 5
Sensitivity (dBm)-161
Flash Memory24C32 EEPROM (32Kb)
Positioning Accuracy(mm)<2500
Receiver Typeu-blox NEO-6M GPS Receiver
Tracking Sensitivity (dBm)-161
Supported protocolsNMEA 0183
Length (mm)35
Width (mm)24
Weight (g)04
Dimensions (L x W x H) mm170 x 130 x 130
InstallationTool-Free, Easy Replacement
Shipping Weight0.01 kg
Shipping Dimensions10 × 8 × 2 cm

What's in the box

  • 1 x GY-NEO6MV2 GPS Module with Flight Control
  • 1 x Antenna

Frequently Asked Questions

What is the default baud rate of the GY-NEO6MV2?
The module typically communicates at 9600 baud by default, but this can be changed using configuration commands. Check your specific unit's documentation for confirmation.
Can I use this module with a 5V Arduino?
Yes, the module supports input voltages from 3.3V to 5V, so it can be powered directly from a 5V Arduino. However, ensure the serial logic levels are compatible; if your Arduino is 5V, the module's RX pin may require a level shifter.
Does it come with an external antenna?
The package includes one antenna, which is typically the ceramic antenna. An external active antenna can be connected if needed, but it is not included unless specified.
How long does it take to get a GPS fix?
The time to first fix depends on signal conditions and whether the module has a clear sky view. Typically, a cold start may take a few minutes, while a hot start is faster.
Is the module compatible with Raspberry Pi?
Yes, it can be connected to the Raspberry Pi's UART pins. You will need to enable serial communication and may need to disable the console over serial for proper operation.
What is the purpose of the EEPROM on this module?
The 24C32 EEPROM stores configuration settings such as update rate and baud rate, so you don't have to reconfigure the module every time it powers up.

Overview

The GY-NEO6MV2 is a GPS receiver module that brings the proven u-blox NEO-6M chipset to your DIY electronics projects. It is designed for integration with microcontrollers and flight controllers, delivering real-time position, velocity, and time data over a simple TTL serial connection. The module includes a ceramic antenna on the board and also supports an external active antenna, which can help maintain signal quality when the module is mounted in an enclosure or on a vehicle. An onboard LED provides a visual indication of GPS fix status, and the 24C32 EEPROM allows you to save configuration settings so they persist across power cycles. With a small footprint and low weight, this module is well-suited for space-constrained builds such as drones, RC planes, and portable trackers.

Key Features

  • u-blox NEO-6M GPS receiver: a widely used chipset known for stable performance in hobbyist and educational projects.
  • Ceramic antenna included: provides a built-in solution for signal reception, with support for an external active antenna for added flexibility.
  • 24C32 EEPROM: stores configuration data, reducing the need to reconfigure the module after each power-up.
  • TTL serial interface: connects easily to microcontrollers and flight controllers that support serial communication.
  • NMEA 0183 protocol: outputs standard sentences that are compatible with a wide range of software and libraries.
  • LED indicator: helps you monitor the module's status during setup and operation.
  • Wide input voltage range: operates from 3.3V to 5V, making it suitable for both 3.3V and 5V logic systems.

Specifications Explained

Receiver type: The u-blox NEO-6M is a GPS receiver that supports the NMEA 0183 protocol, which is the standard for transmitting GPS data over serial. This means you can use common libraries and software to parse the output.

Sensitivity: With a tracking sensitivity of -161 dBm, the module is capable of maintaining a fix in weak signal conditions, although performance will depend on antenna placement and environment.

Positioning accuracy: The module offers positioning accuracy of less than 2500 mm (2.5 meters), which is typical for GPS receivers in this class and sufficient for many navigation and tracking tasks.

Input voltage: The 3.3V to 5V range means you can power it directly from a 5V microcontroller like an Arduino Uno or a 3.3V board like a Raspberry Pi, without additional level shifting for power.

EEPROM: The 24C32 EEPROM provides 32Kb of storage for configuration settings, so your preferred update rate and other parameters can be saved.

Dimensions and weight: The board measures 35 mm by 24 mm and weighs approximately 4 grams, making it easy to integrate into small projects. The shipping dimensions and weight are also provided for logistics.

Compatibility and Requirements

The module is compatible with Arduino, Raspberry Pi, and flight controllers such as APM 2.5 and 2.6, as well as other systems that support TTL serial communication and NMEA 0183. It requires a free serial port (or a software serial port) on your microcontroller. The input voltage must be within 3.3V to 5V. An external active antenna can be connected if needed, but the built-in ceramic antenna may suffice for many applications. No additional software is required beyond a serial terminal or GPS parsing library.

Typical Uses

  • Adding GPS positioning to Arduino or Raspberry Pi projects
  • Providing location data for drones and RC planes with compatible flight controllers
  • Building custom GPS trackers for vehicles or assets
  • Robotics projects requiring navigation and waypoint following
  • Time synchronization using GPS time data

What's in the Box

  • 1 x GY-NEO6MV2 GPS Module with Flight Control
  • 1 x Antenna

Quick specs

Item Type
GPS Module
Input Voltage (V)
3.3 to 5
Sensitivity (dBm)
-161
Flash Memory
24C32 EEPROM (32Kb)
Positioning Accuracy(mm)
<2500
Receiver Type
u-blox NEO-6M GPS Receiver
See all specifications