Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This gsm gprs and gnss modules is a good fit for makers, students and electronics hobbyists. Main specs: item type GPS Module; compatible lipo batteries 1S–2S LiPo; tracking sensitivity (dbm) -160. Check that your power source supplies 3.3V to 5V before connecting it.

Key Highlights

  • Item Type: GPS Module
  • Compatible LiPO Batteries: 1S–2S LiPo
  • Tracking Sensitivity (dBm): -160

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeGPS Module
Compatible LiPO Batteries1S–2S LiPo
Tracking Sensitivity (dBm)-160
FrameworkArduino, Raspberry Pi, STM32, Flight Controller
Operating Temperature (°C)-40 to 85
CommunicationTTL Serial (default 9600 baud)
LED IndicatorYes
Input Voltage3.3V to 5V
Mounting Style4 mounting holes
CompatibilityArduino, STM32, Raspberry Pi, Flight Ctrl
Flash MemoryEEPROM
Positioning Accuracy(mm)2500
Receiver Type50-channel Ublox NEO-6M GPS Receiver
Length (mm)35
Width (mm)24
Weight (g)04
Dimensions (L x W x H) mm170 x 130 x 130
InstallationTool-Free, Easy Replacement
Shipping Weight0.005 kg
Shipping Dimensions10 × 8 × 2 cm

Overview

The GY-NEO6MV2 GPS Module With Flight Control Only Red Board is listed in our gsm gprs and gnss modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: GPS Module
  • Compatible LiPO Batteries: 1S–2S LiPo
  • Tracking Sensitivity (dBm): -160
  • Framework: Arduino, Raspberry Pi, STM32, Flight Controller
  • Operating Temperature (°C): -40 to 85
  • Communication: TTL Serial (default 9600 baud)
  • LED Indicator: Yes
  • Input Voltage: 3.3V to 5V (match this to your power supply; too high a voltage can damage the part)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The GY-NEO6MV2 GPS Module with Flight Control (Red Board) is a compact and highly accurate GPS receiver designed for Arduino, drones, and robotics. It features the NEO-6M GPS chip for fast satellite lock, EEPROM for data retention, and a built-in ceramic antenna for reliable signal strength. With onboard LED indicators, this module provides real-time connectivity feedback. It supports TTL-level serial communication with a default 9600 baud rate, making it plug-and-play compatible with most flight controllers. Whether you're building a drone, vehicle tracker, or any GPS-enabled project, this module ensures precise location data in a lightweight and efficient form factor.


Features:

  1. NEO-6M GPS chip for high sensitivity and fast satellite acquisition
  2. Inbuilt EEPROM stores configuration on power loss
  3. Default 9600 baud rate ensures easy serial communication
  4. LED signal indicators provide real-time status alerts
  5. Compact PCB design ideal for space-limited applications
  6. Passive ceramic antenna for strong and stable GPS reception
  7. TTL-compatible UART interface for direct MCU connection
  8. Compatible with flight controllers, Arduino, and Raspberry Pi

Package Includes:

1 x GY-NEO6MV2 GPS Module With Flight Control Red Board

Quick specs

Item Type
GPS Module
Compatible LiPO Batteries
1S–2S LiPo
Tracking Sensitivity (dBm)
-160
Framework
Arduino, Raspberry Pi, STM32, Flight Controller
Operating Temperature (°C)
-40 to 85
Communication
TTL Serial (default 9600 baud)
See all specifications