At a glance
This zvs heating module is a good fit for makers, students and electronics hobbyists. Main specs: supply voltage 9–12.6V; supply current Max: 12.6V x 2.6A; output current ≤3A (The device supports an output discharge function; continuous current should be limited to within 3A. In the event of an output short circuit, a current exceeding 13A is required to trigger the lithium battery protection circuit! Please use with caution; failure to do so may result in circuit burnout!). Check that your power source supplies 9–12.6V before connecting it.
Key Highlights
- Small and easy to carry or mount
- Supply Voltage: 9–12.6V
- Supply Current: Max: 12.6V x 2.6A
- Output Current: ≤3A (The device supports an output discharge function; continuous current should be limited to within 3A. In the event of an output short circuit, a current exceeding 13A is required to trigger the lithium battery protection circuit! Please use with caution; failure to do so may result in circuit burnout!)
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Supply Voltage | 9–12.6V |
|---|---|
| Supply Current | Max: 12.6V x 2.6A |
| Output Current | ≤3A (The device supports an output discharge function; continuous current should be limited to within 3A. In the event of an output short circuit, a current exceeding 13A is required to trigger the lithium battery protection circuit! Please use with caution; failure to do so may result in circuit burnout!) |
| Battery Pack | 3-Series 18650 / 12.6V (Use lithium batteries with a discharge rate of ≥3C) |
| Capacity | 2600mAh |
| Battery Chemistry | Ternary Lithium |
| Standby Current Consumption | 12.6V @ 0.1A / 1.26W |
| Max. Power Consumption | ≤40W / Typical: 32W |
| Battery Life | 2600mAh provides a continuous runtime of 35 minutes, or supports 20,000 arc discharges (under 2Hz test conditions). |
| Arc Length | Adjustable - Max 9cm |
| Operation Modes | Single-shot + Automatic Trigger |
| Auto-Trigger | 1–10Hz (10 adjustable levels; when powered on, pressing the automatic trigger mode button defaults to 5Hz. Each subsequent press increases the frequency by 1Hz, cycling through the 10 levels.) |
| Pulse Width | 0–500µs (7 adjustable levels; when powered on, the default setting is the maximum 500µs, cycling through the 7 levels.) |
| Other Features | Rotating the knob allows for fine-tuning of the arc shape and power output. |
| Temperature Status Indicator | ≥60°C: Triggers LED2 illumination and disables the device; ≤50°C: Device resumes operation. |
| Low Battery Voltage Indicator | ≤9V: Triggers LED3 illumination and disables the device; >10V: Device resumes operation. |
| Noise Level | 1m / 86.5 dB |
| Electric Field Strength | 1m ≈ 1700V |
| Magnetic Field Strength | 1m ≈ 30µT |
| Charger | IN: 110–240V, 50/60Hz OUT: DC 12.6V @ 1A |
| Coil | Diameter: 40 × 74mm Resonant Frequency: 1.3-1.5 MHz Weight: 65g |
| Main Unit Dimensions | Length: 117mm (excluding coil) Width: 71mm Height: 163mm |
| Weight 1 | Net Weight: 623g ± 10g (excluding packaging/charger) |
| Weight 2 | Gross Weight: 897g ± 20g |
| Package Dimensions | 215 x 205 x 105mm |
Overview
The Handheld Tesla Coil PRO High Voltage Arc Generator 9-12.6V Power Compact Design Electromagnetic Shielding Test is listed in our zvs heating module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Supply Voltage: 9–12.6V (match this to your power supply; too high a voltage can damage the part)
- Supply Current: Max: 12.6V x 2.6A (your supply must deliver at least this much current)
- Output Current: ≤3A (The device supports an output discharge function; continuous current should be limited to within 3A. In the event of an output short circuit, a current exceeding 13A is required to trigger the lithium battery protection circuit! Please use with caution; failure to do so may result in circuit burnout!) (note the battery type so you can order spares or the right charger)
- Battery Pack: 3-Series 18650 / 12.6V (Use lithium batteries with a discharge rate of ≥3C) (note the battery type so you can order spares or the right charger)
- Capacity: 2600mAh
- Battery Chemistry: Ternary Lithium (note the battery type so you can order spares or the right charger)
- Standby Current Consumption: 12.6V @ 0.1A / 1.26W (your supply must deliver at least this much current)
- Max. Power Consumption: ≤40W / Typical: 32W
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.







Quick specs
- Supply Voltage
- 9–12.6V
- Supply Current
- Max: 12.6V x 2.6A
- Output Current
- ≤3A (The device supports an output discharge function; continuous current should be limited to within 3A. In the event of an output short circuit, a current exceeding 13A is required to trigger the lithium battery protection circuit! Please use with caution; failure to do so may result in circuit burnout!)
- Battery Pack
- 3-Series 18650 / 12.6V (Use lithium batteries with a discharge rate of ≥3C)
- Capacity
- 2600mAh
- Battery Chemistry
- Ternary Lithium
Explore more
Cheaper Alternatives
High Voltage Boost Module Arc Igniter DC 3.3V to 5V Adjustable Output 15KV to 30KV Low Heat Advanced Circuit
High Voltage Module 20KV 40KV Adjustable Output Compact Design Lithium Battery Powered Boost Coil Powerful Pulse Discharge Suitable for Experimental Equipment and High Power Applications
20KV High Frequency High Voltage Transformer Epoxy Resin Coil Ozone Generator Air Purification Negative Ion Producer 23KHz-130KHz High Efficiency









