Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The HANYOUNG NUX HY-606-MD is a 12 to 24 VDC piezo buzzer rated at 98 dB with four selectable tones. Its adjustable volume control lets you match alert loudness to the environment.

Key Highlights

  • 12 to 24 VDC operating range suits common low-voltage control supplies
  • 98 dB sound pressure level for audible alerts in busy areas
  • Four selectable tones to separate different machine conditions
  • Adjustable volume control to match the surrounding noise level
  • 2.5 W power consumption keeps demand on the supply modest
  • Compact HANYOUNG NUX unit for straightforward panel installation

Ideal For

  • Control panel builders specifying DC audible alarms
  • Maintenance technicians replacing failed panel buzzers
  • Machine integrators needing multi-tone alert signalling
  • Commercial and industrial installers adding warning tones
  • Makers building workshop or equipment alert systems

Buying Tip

Confirm your panel supply sits within 12 to 24 VDC and check the 2.5 W draw against your circuit before wiring the buzzer in.

Elecvora expert review

Our verdict

A practical, flexible DC buzzer for panel and equipment alerting, with multi-tone selection and volume adjustment that make it easy to fit into different environments. The 98 dB output and 12 to 24 VDC range cover most common low-voltage signalling needs.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Accepts both 12 V and 24 V DC supplies
  • 98 dB output suited to noisy workplaces
  • Four selectable tones add signalling flexibility
  • Adjustable volume avoids unnecessary loudness
  • Low 2.5 W consumption

Cons

  • Package contents are not confirmed in the available data
  • No mounting or wiring accessories are listed
  • Volume and tone setup must be done at installation

Best for

Panel builders and maintenance teams needing a loud, adjustable DC buzzer

Not ideal for

Applications requiring a specific tone type or supply outside 12 to 24 VDC

Specifications

ManufacturerHANYOUNG NUX
Voltage Rating12 to 24VDC
Frequency50Hz, 60Hz
Sound Pressure Level (dB)98
Supply Voltage12 V to 24 V DC
Power Consumption (W)2.5
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Frequently Asked Questions

What voltage does the HY-606-MD need?
It operates from a 12 to 24 VDC supply, so it can be used in systems running at either of those common control voltages.
How loud is this buzzer?
The rated sound pressure level is 98 dB, and the volume control lets you reduce it to suit the environment.
Can I change the alert tone?
Yes. The buzzer offers four selectable tones, allowing different signals for different conditions.
How much power does it draw?
Power consumption is listed at 2.5 W, which is useful when sizing the supply circuit.
What is included with the buzzer?
Package contents are not specified in the available product data, so check with your seller before ordering.
How should I care for the unit?
Keep the sound opening clear of dust and debris, and wire it only within the stated 12 to 24 VDC range.

Overview

The HANYOUNG NUX HY-606-MD is a piezo buzzer designed to add a clear audible signal to control panels, machines and equipment. It runs from a 12 to 24 VDC supply and delivers a sound pressure level of up to 98 dB, giving you a notification that carries across a working area rather than a faint beep buried in background noise.

What sets this model apart is flexibility. You can choose between four selectable tones, so a single buzzer type can cover several alert conditions, and the adjustable volume control lets you tune loudness to the room. That makes it easier to standardise on one part across different installations.

Key Features

  • Wide DC input range: operates from 12 V to 24 V DC, matching many common control and signalling supplies.
  • 98 dB output: strong enough for workshop, plant and commercial environments.
  • Four selectable tones: distinguish start, stop, fault or other conditions by sound.
  • Adjustable volume: reduce output where a full-level alarm would be excessive.
  • 2.5 W consumption: a modest load on the supply circuit.
  • HANYOUNG NUX build: produced by a manufacturer known for control and automation components.

Specifications Explained

Voltage and power

The 12 to 24 VDC rating means the buzzer fits systems running on either common control voltage. Power consumption is listed at 2.5 W, which helps when checking supply capacity and fuse selection.

Sound output

At 98 dB, the HY-606-MD produces an alert that is easy to notice in an industrial setting. The adjustable volume control means you are not locked into maximum output where a quieter confirmation tone is enough.

Tones and frequency

Four selectable tones give you options for different signals, and the frequency specification covers 50 Hz and 60 Hz supply environments. Together these let the same buzzer serve multiple alert roles.

Compatibility and Requirements

The buzzer requires a DC supply within the 12 to 24 V range and wiring to the panel or controller that will switch it. Plan your circuit around the 2.5 W consumption figure. No other accessories or ratings are specified for this model.

Typical Uses

  • Machine status and fault alerts in control cabinets
  • Industrial equipment start and stop signalling
  • Commercial premises notification and warning tones
  • Home or workshop project builds needing a loud DC buzzer

What's in the Box

Package contents are not specified in the available product data, so confirm the supplied items with your seller before ordering.

Quick specs

Manufacturer
HANYOUNG NUX
Voltage Rating
12 to 24VDC
Frequency
50Hz, 60Hz
Sound Pressure Level (dB)
98
Supply Voltage
12 V to 24 V DC
Power Consumption (W)
2.5
See all specifications