Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This bluetooth and nrf modules is a good fit for makers, students and electronics hobbyists. Main specs: item type HC Series Module; voltage rating 3.2 to 6; model no. / name HC-02. Check that your power source supplies 3.2 to 6 before connecting it.

Key Highlights

  • Wireless connection
  • Item Type: HC Series Module
  • Voltage Rating: 3.2 to 6
  • Model No. / Name: HC-02

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeHC Series Module
Voltage Rating3.2 to 6
Model No. / NameHC-02
Operating Frequecy 2.4G
Communication ModeUA pin 3.3V TTL level
Input Voltage (V)3.2 ~ 6V
Operating Voltage3.0 ~ 3.6V
RSSI Support not support
Communication Level3.3V
Transmitted Power6dBm (max)
Reference Distance10m
Air Data Rate2Mbps
Antenna InterfaceInternal PCB antenna
Additional Specs.Communication Current: 30mA
Receiving Sensitivity-85dBm @ 2Mbps
Operating humidity10% ~ 90%
Storage Temperature (°C)-40°C ~ + 85°C
Operating Temperature (°C)-25°C ~ 75°C
Shipping Weight0.005 kg
Shipping Dimensions6 × 5 × 1 cm

Overview

The HC-02 6pin Bluetooth Module Compatible with HC-05 / HC- 06 is listed in our bluetooth and nrf modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: HC Series Module
  • Voltage Rating: 3.2 to 6 (match this to your power supply; too high a voltage can damage the part)
  • Model No. / Name: HC-02
  • Operating Frequecy:  2.4G
  • Communication Mode: UA pin 3.3V TTL level
  • Input Voltage (V): 3.2 ~ 6V (match this to your power supply; too high a voltage can damage the part)
  • Operating Voltage: 3.0 ~ 3.6V (match this to your power supply; too high a voltage can damage the part)
  • RSSI Support:  not support (confirm your cable or board uses the same connector)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

HC-02 Bluetooth serial communication module is based on the Bluetooth v2.0 Bluetooth protocol data transmission module, high stability, ultra-low power consumption, industrial-grade Bluetooth data transmission module. Users do not need to care about complex wireless communication configuration and transmission algorithms. They only need to connect to devices through the TTL serial port. Powered the HC-02 slave module, and can be connected to the mobile phone for data transmission. In addition, it can be used with HC-05 or HC-06 hosts (matching code, default is 1234) to connect, can replace a traditional serial line, save wiring work, use it’s very flexible.

Pinout Diagram:


How to Use the HC-02 Bluetooth module: 

The HC-02 has two operating modes, one is the Data mode in which it can send and receive data from other Bluetooth devices and the other is the AT Command mode where the default device settings can be changed. We can operate the device in either of these two modes by using the key pin as explained in the pin description. It is very easy to pair the HC-02 module with microcontrollers because it operates using the Serial Port Protocol (SPP). Simply power the module with +5V/+3.3V and connect the Rx pin of the module to the Tx of MCU and Tx pin of module to Rx of MCU as shown in the figure below

During power up the key pin can be grounded to enter into Command mode, if left free it will by default enter into the data mode. As soon as the module is powered you should be able to discover the Bluetooth device as “HC-02” then connect with it using the default password 1234 and start communicating with it.

Features

  1. Support transparent transmitted with iPhone, integrated with the advantage of Bluetooth 4.0 BLE (Support iPhone 4s version above, cannot connect with the phone's Bluetooth directly, need a BLE Bluetooth serial port assistant)
  2. Compatible with HC-05 and HC-06 Bluetooth serial port module, Bluetooth 2.0 with EDR, 2 MBPS - 3 MBPS modulation
  3. Built-in 2.4 GHz antennas, users need to debug the antenna
  4. Support transparent transmitted with Android smartphone and notebook computer
  5. Support transparent transmitted with desktop computer via HC-06-USB

Package Includes:

1 x HC-02 6pin Bluetooth Module Compatible with HC-05 / HC- 06

Quick specs

Item Type
HC Series Module
Voltage Rating
3.2 to 6
Model No. / Name
HC-02
Operating Frequecy
 2.4G
Communication Mode
UA pin 3.3V TTL level
Input Voltage (V)
3.2 ~ 6V
See all specifications